Temank 10000W Hybrid Solar Inverter User Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Temank 10000W Hybrid Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Temank 10000W Hybrid Solar Inverter is a multifunctional device integrating solar energy storage, utility charging, and AC sine wave output. It features dual MPPT solar charge controllers and supports various battery types, including batteryless operation.

Figure 1: Temank 10000W Hybrid Solar Inverter

Dette billede viser forsiden view of the Temank 10000W Hybrid Solar Inverter, showcasing its grey and orange casing with the brand logo and a central LCD display.

2. Sikkerhedsoplysninger

Always adhere to local electrical codes and regulations. Installation should be performed by qualified personnel. Disconnect all power sources before performing any maintenance or wiring. This inverter is UL1741 certified, indicating compliance with safety standards for inverters, converters, controllers, and interconnection system equipment for use with distributed energy resources.

2.1 Generelle sikkerhedsforanstaltninger

• Do not connect the positive or negative terminal of the solar panel to the ground.
• Sørg for korrekt jording af inverteren.
• Avoid exposing the inverter to rain, snow, spray, or excessive dust.
• Skil ikke inverteren ad. Der er ingen dele indeni, som brugeren kan servicere.
• Sørg for tilstrækkelig ventilation omkring inverteren for at forhindre overophedning.

3. Produktet er slutview

3.1 Nøglefunktioner

• 10000W Pure Sine Wave Output: Provides stable and clean power for sensitive electronics.
• Dual MPPT Solar Charge Controllers: Two independent Maximum Power Point Tracking inputs for optimal solar energy harvesting, supporting up to 11KW PV input (5500W per input).
• Split-Phase and Single-Phase Output: Capable of providing 120V/240V AC output.
• Batterikompatibilitet: Supports AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4 batteries.
• Batteryless Operation: Can power loads directly from PV array or AC grid without a connected battery.
• Flere opladningstilstande: Solar only, mains priority, solar priority, and mixed mains/PV charging.
• Omfattende beskyttelse: Inkluderer kortslutning, overstrøm, over-/undervolumentage, overload, backfill, and over-temperature protection.
• Kommunikationsporte: Supports CAN, USB, and RS485 for monitoring and control.

3.2 Pakkens indhold

Bekræft at alle varer er inkluderet i din pakke:

• Temank 10000W Hybrid Solar Inverter
• Instruktionsmanual (dette dokument)
• Cable Lugs and Screws for connections

Figur 2: Pakkens indhold

This image illustrates the contents of the product package, showing the solar inverter unit, the instruction manual, and a set of cable lugs and screws.

3.3 Inverterkomponenter og porte

Figur 3: Inverterkomponenter og porte

This diagram labels the various components and connection ports on the inverter, including the LCD screen, LED indicators, touchable keys, ON/OFF rocker switch, PV inputs, battery inputs, dry contact, CAN/RS485 ports, USB-B port, grounding screw, AC output, AC input, and AC input breaker.

4. Installation og opsætning

4.1 Montering af inverteren

Choose a suitable location for mounting the inverter. It should be a dry, well-ventilated area, away from direct sunlight and flammable materials. Ensure sufficient clearance around the unit for proper airflow.

4.2 Ledningsforbindelser

All wiring must comply with local electrical codes. Use appropriate wire gauges as specified in the technical specifications. Ensure all connections are secure to prevent loose contacts and potential hazards.

4.2.1 PV-indgangsforbindelse

The inverter supports two PV inputs. Connect solar panels to the PV input terminals. The maximum PV input power is 11KW (5500W per input), with a maximum PV input voltage of 500Vdc and a starting voltage greater than 150V. Use 10AWG PV wire.

4.2.2 Batteritilslutning

Connect the 48V battery bank to the battery input terminals. The inverter is compatible with various 48V battery types. Ensure correct polarity. The maximum charging current is 200A. Use 1 AWG battery wire.

4.2.3 AC Input (Mains/Generator) Connection

Connect the AC input from the utility grid or a generator to the AC input terminals. Input voltage range is 90-140Vac per phase. Use 8-6 AWG AC cable.

4.2.4 AC-udgangsforbindelse

Connect your household loads to the AC output terminals. The inverter provides 120V/240V AC split-phase or single-phase output. Use 8-6 AWG AC cable.

Figure 4: Split-Phase Wiring Diagram

This diagram illustrates the wiring for a split-phase system, showing connections for PV input, AC input (mains/generator), 48V battery, and AC output to household loads. It highlights the L1, L2, N, and PE connections.

Figure 5: Single-Phase Wiring Diagram

This diagram shows the wiring for a single-phase system, detailing connections for PV input, AC input (mains/generator), 48V battery, and AC output to household loads, emphasizing the L1, N, and PE connections.

4.3 Battery Compatibility and Batteryless Operation

The inverter is designed to work with 48V battery systems including AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4. It also supports batteryless operation, where the inverter can power loads directly from the PV array or AC grid without a connected battery.

Figur 6: Batterikompatibilitet

This image highlights the inverter's compatibility with various 48V battery types (AGM, GEL, FLD, LI, SLD, USER) and its ability to operate without batteries, powering loads directly from solar or grid input.

5. Betjeningsvejledning

5.1 Tænd/sluk

1. Sørg for, at alle ledningsforbindelser er korrekte og sikre.
2. Tænd for batteriafbryderen (hvis relevant).
3. Tænd for AC-indgangsafbryderen (hvis relevant).
4. Tænd for PV-indgangsafbryderen (hvis relevant).
5. Press the ON/OFF rocker switch on the inverter to the 'ON' position.

For at slukke, gå i omvendt rækkefølge.

5.2 LCD-display og indikatorer

Inverteren har en LCD HD-skærm til overvågning af driftsdata for solcelleanlægget i realtid. LED-indikatorer giver hurtige statusopdateringer.

Figur 7: LCD-skærmgrænseflade

This image shows the inverter's LCD display, illustrating various screens that provide real-time data such as PV input voltage, batteri voltage, output voltage, charging current, and power generation statistics.

5.3 opladningstilstande

Inverteren tilbyder fire valgbare opladningstilstande:

• Kun solenergi: Prioriterer solenergi til opladning.
• Netprioritet: Prioritizes utility grid power for charging.
• Solprioritet: Bruger først solenergi, derefter elforsyning, hvis solenergien ikke er tilstrækkelig.
• Blandet net-/PV-opladning: Kombinerer solenergi og strøm fra elnettet til opladning.

5.4 Outputtilstande

Two output modes are available:

• Forsyningsbypass: Belastninger forsynes direkte fra forsyningsnettet.
• Inverter output: Loads are powered by the inverter (from solar or battery).

5.5 Time-Slot Charging/Discharging Function

The inverter supports time-slot charging and discharging, allowing users to set specific periods for charging from utility power or discharging the battery based on electricity tariffs. This optimizes energy usage and can reduce costs.

Figure 8: Time-Slot Functionality

This image illustrates the time-slot charging and discharging function, showing how users can define periods for utility/PV charging and battery discharging to optimize energy use based on peak and valley electricity tariffs.

5.6 Strømbesparende tilstand

Enable power saving mode to reduce energy consumption when the load is low. If the load power drops below 50W, the inverter output will switch off after a 5-minute delay. The inverter will automatically restart when the load exceeds 50W.

Figure 9: Power Saving Mode

This image visually represents the Power Saving Mode feature, indicating that the inverter will switch off after a delay if the load is below 50W and restart when the load increases.

5.7 Monitoring via SmartESS App

The inverter supports monitoring and control via the SmartESS App. A Wi-Fi/GPRS data acquisition module is required and must be purchased separately.

Figur 10: SmartESS-appovervågning

This image shows the inverter connected to a smartphone via an optional Wi-Fi/GPRS module, illustrating the capability to monitor and control the system using the SmartESS App.

6. Vedligeholdelse

6.1 Cleaning and Ventilation

The inverter is equipped with four cooling fans for efficient heat dissipation. It also features a detachable insect-proof screen for easy cleaning, which helps prevent short circuits caused by insects and maintains optimal performance.

Figure 11: Maintenance Features

This image highlights key maintenance features such as the detachable insect-proof screen for easy cleaning and the intelligent cooling fans designed to dissipate heat and prevent overheating.

6.2 Regelmæssig kontrol

• Periodically inspect all wiring for signs of wear or damage.
• Ensure all connections remain tight.
• Keep the inverter's ventilation openings clear of obstructions.
• Overvåg LCD-displayet for fejlkoder eller usædvanlige aflæsninger.

7. Fejlfinding

Hvis inverteren ikke fungerer som forventet, skal du udføre følgende grundlæggende kontroller, før du kontakter support:

• Verify that all power switches (battery, AC input, PV input) are in the 'ON' position.
• Check all cable connections for tightness and correct polarity.
• Examine the LCD display for any error messages or fault codes and refer to the specific error code section in the full manual (if available).
• Sørg for, at batteriets voltage is within the acceptable operating range.
• Confirm that solar panels are receiving adequate sunlight and producing voltage.
• Check for any tripped circuit breakers in your electrical system.

For persistent issues, consult the detailed troubleshooting guide in the comprehensive product manual or contact customer support.

8. Specifikationer

Figur 12: Tekniske specifikationer ovenforview

This image presents a table summarizing the key technical specifications of the inverter, including AC input/output, PV input, battery type, safety standards, and physical dimensions.

9. Garanti og support

9.1 Garantioplysninger

Se venligst garantikortet, der følger med dit produkt, for specifikke garantivilkår. Gem din købsbevis til garantikrav.

9.2 Kundesupport

For technical assistance, troubleshooting, or warranty inquiries, please contact Temank customer support. Contact information can typically be found on the manufacturer's webwebstedet eller på produktemballagen.