Reloop RT-1 BT Turntable User Manual

1. Introduktion og overview

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. Sikkerhedsinstruktioner

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• Strømforsyning: Brug kun den medfølgende strømadapter. Sørg for, at lydstyrkentage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• Vand og fugt: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• Ventilation: Ensure adequate ventilation. Do not block ventilation openings. Install the unit according to the manufacturer's instructions.
• Varme: Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Rensning: Rengør kun med en tør klud. Undgå at bruge flydende eller aerosolbaserede rengøringsmidler.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, f.eks. hvis strømledningen eller stikket er beskadiget, hvis der er spildt væske eller genstande er faldet ned i apparatet, hvis apparatet har været udsat for regn eller fugt, ikke fungerer normalt eller er blevet tabt.
• Placering: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

3. Pakkens indhold

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• Aluminiumsfad
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• indkapslingen
• Filtmåtte
• Dust Cover (removable acrylic)
• Modvægt
• Lydkabel (RCA)
• Center Adapter (for 45 RPM records)
• Strømforsyningsenhed
• Instruktionsmanual

4. Opsætning

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 Udpakning og placering

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 Montering af plade og bånd

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. Læg filtmåtten oven på fadet.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 Opsætning af tonearm og pickuppe

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Juster anti-skating-drejeknappen, så den passer til indstillingen af ​​sporingskraften.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 Lydforbindelser

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your ampLifier har en dedikeret phono-indgang.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your amplifier eller drevne højttalere.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your amplifers input.

Billede: Bagside view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 Strømtilslutning

1. Connect the power supply unit to the DC input on the turntable.
2. Sæt strømadapteren i en passende stikkontakt.

5. Betjeningsvejledning

This section details how to operate your Reloop RT-1 BT turntable.

5.1 Afspilning af en plade

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. Tryk på START/STOP-knappen for at starte tallerkenrotationen.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 Pitch Adjustment

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 Bluetooth-forbindelse

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. Vedligeholdelse

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• Rengøring af enheden: Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• Styluspleje: Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• Støvdæksel: Hold støvdækslet lukket, når pladespilleren ikke er i brug, for at beskytte den mod støv og snavs.
• Bælteinspektion: Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

7. Fejlfinding

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.