Hyzom Wi-Fi Repeater (Model B0BL2DRCST) User Manual

1. Introduktion

The Hyzom Wi-Fi Repeater is designed to extend the coverage of your existing wireless network. It eliminates Wi-Fi dead zones and improves signal strength, allowing for a more stable and reliable internet connection throughout your home or office. This device supports both Repeater and Access Point (AP) modes, offering flexibility for various networking needs.

Figur 1: Forside view of the Hyzom Wi-Fi Repeater, showing its four external antennas and LED indicators.

2. Sikkerhedsoplysninger

Læs og følg disse sikkerhedsinstruktioner omhyggeligt for at forhindre skader på enheden eller personskade.

• Udsæt ikke enheden for vand eller fugt.
• Åbn eller forsøg ikke at reparere enheden selv. Overlad al service til kvalificeret personale.
• Brug kun den strømkilde, der er angivet til denne enhed.
• Hold enheden væk fra varmekilder og direkte sollys.
• Sørg for tilstrækkelig ventilation omkring enheden. Bloker ikke ventilationsåbningerne.
• Denne enhed er kun beregnet til indendørs brug.

3. Opsætning

The Hyzom Wi-Fi Repeater offers two primary setup methods: WPS (Wi-Fi Protected Setup) and Web Browser Configuration.

3.1. Fysisk installation

1. Pak enheden ud: Carefully remove the Wi-Fi Repeater from its packaging.
2. Vælg en placering: Select a central location between your main router and the area where you need improved Wi-Fi coverage. Ensure it is within the range of your existing Wi-Fi signal.
3. Tilslut: Plug the Wi-Fi Repeater into a standard electrical outlet. The power LED indicator should light up.

Figure 2: The Hyzom Wi-Fi Repeater is designed for wall-plug installation, blending into home decor.

3.2. Configuration via WPS (Recommended for quick setup)

WPS allows for a quick and easy connection without needing to enter network passwords.

1. Tænd: Plug the Wi-Fi Repeater into an electrical outlet.
2. Press WPS on Repeater: Press the WPS button on the side of the Hyzom Wi-Fi Repeater. The WPS LED indicator should start blinking.
3. Tryk på WPS på routeren: Inden for to minutter skal du trykke på WPS-knappen på din primære Wi-Fi-router.
4. Vent på forbindelse: The repeater will automatically connect to your router. Once connected, the signal strength LEDs on the repeater will light up, indicating a successful connection.

Figure 3: The WPS button on the side of the repeater simplifies the setup process.

3.3. Konfiguration via Web Browser (For advanced settings or if WPS fails)

1. Opret forbindelse til repeaterens netværk: Plug in the repeater. On your computer or mobile device, connect to the repeater's default Wi-Fi network (e.g., "Hyzom_Extender" or similar, usually found on a label on the device). No password is required initially.
2. Adgang Web Interface: Åbn a web browser og indtast standard IP-adressen (f.eks. 192.168.1.254 or repeater.local) into the address bar. Refer to the device label or quick start guide for the exact address.
3. Log ind: Indtast standardbrugernavn og -adgangskode (normalt "admin" for begge, eller som angivet på enhedens etiket).
4. Vælg tilstand: Choose either "Repeater Mode" or "AP Mode" based on your needs.
   • Repeater-tilstand: Udvider dit eksisterende Wi-Fi-netværk. Vælg dit primære Wi-Fi-netværk på listen, indtast dets adgangskode, og konfigurer det udvidede netværks navn (SSID) og adgangskode.
   • AP-tilstand: Transforms your wired network connection into a wireless access point. Connect an Ethernet cable from your router to the repeater's LAN port. Configure the new wireless network's name (SSID) and password.
5. Anvend indstillinger: Gem indstillingerne, og vent på, at repeateren genstarter.
6. Tilslut igen: Reconnect your devices to the new extended or AP network.

4. Betjening

Once configured, the Hyzom Wi-Fi Repeater operates automatically to provide extended wireless coverage.

4.1. LED-indikatorer

LED-lamperne på frontpanelet giver oplysninger om enhedens status:

• Power LED: Angiver om enheden er tændt.
• WPS LED: Blinks during WPS setup, solid when WPS connection is established.
• Signalstyrke LED'er: Indicate the strength of the signal received from your main router. More LEDs lit means a stronger signal. Aim for at least two or three LEDs for optimal performance.
• LAN/WAN-LED: Angiver aktivitet på Ethernet-porten.

Figur 4: Bagside view of the Hyzom Wi-Fi Repeater, showing the power plug for direct wall insertion.

4.2. Network Coverage and Performance

The repeater is designed to provide up to 7000 square feet of extended Wi-Fi coverage. Its four external high-gain antennas help to achieve 360-degree full signal coverage, reducing signal loss when passing through walls and focusing signal strength towards your devices.

Figure 5: Illustration of how the Wi-Fi Repeater extends network coverage throughout a multi-story home, eliminating dead zones.

Figure 6: The repeater can connect up to 40 devices, supporting a wide range of compatible devices for various activities.

Figure 7: The extended Wi-Fi network supports multiple users and activities simultaneously.

4.3. Kablet forbindelse

The repeater includes a WAN/LAN Ethernet port that supports both network output and input. This allows for a faster and more stable wired connection for devices like smart TVs, gaming consoles, or desktop computers, reducing wireless interference.

Figure 8: The Ethernet port provides options for both wired device connection and AP mode setup.

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your Wi-Fi Repeater.

• Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller aerosoler.
• Optimal placering: Periodically check the signal strength LEDs. If the signal is weak, consider repositioning the repeater closer to your main router or in a more open area.
• Firmwareopdateringer: Tjek producentens website periodically for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided by the manufacturer for any updates.
• Genstart: If you experience network issues, try restarting the repeater by unplugging it from the power outlet for 10 seconds and then plugging it back in.

6. Fejlfinding

If you encounter problems with your Hyzom Wi-Fi Repeater, refer to the following common issues and solutions:

If problems persist, consider performing a factory reset on the repeater by pressing and holding the reset button (usually a small pinhole) for 5-10 seconds while the device is powered on. This will revert all settings to their default values.

7. Specifikationer