ANENG PN200

ANENG PN200 Digital Clamp Meter Multimeter Brugsanvisning

Model: PN200

1. Produktet er slutview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 Digital Clamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Pakkens indhold

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp Måler
  • 2x AAA batterier
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1x ladekabel
  • 1x brugsanvisning
  • 1x opbevaringspose

3. Opsætning

3.1 Batteriinstallation

  1. Find batteridækslet på bagsiden af ​​enheden.
  2. Skub dækslet af for at åbne rummet.
  3. Isæt de to AAA-batterier, og sørg for at polerne vender korrekt (+/-).
  4. Skub batteridækslet tilbage på plads, indtil det klikker sikkert.

3.2 Tilslutning af testledninger

  1. For bdtage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Insert the red test lead into the 'VΩHz' jack.
  3. Ensure connections are firm before use.

4. Betjeningsvejledning

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Funktionsvalg

Turn the rotary dial to select the desired measurement function:

  • V~: AC Voltage måling
  • V-: DC bindtage måling
  • A~: AC Current measurement (using clamp)
  • EN-: DC Current measurement (using clamp)
  • Ω: Modstandsmåling
  • hz: Frekvensmåling
  • Kapacitans: Kapacitansmåling
  • Diode/Continuity: Diode test and Continuity check
  • NCV: Non-Contact Voltage afsløring

4.2 Nøglefunktioner

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • REL: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clamping.
  • SÆT: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Specifikke målinger

Below are common measurement procedures:

AC/DC Voltage Måling

  1. Turn the dial to 'V~' for AC voltage eller 'V-' for DC-volumentage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. Læs bindtage -værdi på displayet.

AC/DC-strømmåling (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Åbn clamp jaws and enclose a single conductor (not a bundle of wires).
  3. Aflæs den aktuelle værdi på displayet.
  4. Note: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clamping.
ANENG PN200 Digital Clamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 Digital Clamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC Voltage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Non-Contact Voltage (NCV) Detektion

  1. Turn the dial to 'NCV'.
  2. Bring the top part of the clamp meter near an AC voltage kilde.
  3. The meter will beep and an indicator light will illuminate if AC voltage er opdaget.
ANENG PN200 Digital Clamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Officiel produktvideodemonstration

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp Måler.

5. Vedligeholdelse

5.1 Rengøring

Tør enheden af ​​med en tør, blød klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

5.2 Udskiftning af batteri

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Opbevaring

Opbevar klamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. Fejlfinding

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.