Kwikset 9270CNT-15S SmartCode Touchpad Electronic Deadbolt User Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Kwikset 9270CNT-15S SmartCode Touchpad Electronic Deadbolt. This electronic deadbolt offers enhanced security and convenience for your exterior doors, featuring a keypad for keyless entry and Kwikset's SmartKey Security for re-keying.

Figur 1: Udvendigt view of the Kwikset 9270CNT-15S SmartCode Touchpad Electronic Deadbolt.

Opsætning og installation

Before beginning installation, ensure all components are present and refer to the detailed installation guide included in your product packaging. Basic tools such as a Phillips head screwdriver are typically required.

Trin før installation

1. Check Door Dimensions: Verify your door's thickness and backset measurement are compatible with the deadbolt.
2. Forbered døren: If replacing an existing lock, remove it. Ensure the door frame strike plate is properly aligned.

Installationsprocedure

1. Installer lås: Insert the latch into the door edge and secure it with screws. Ensure the latch bolt is facing the correct direction.
2. Installer udvendig samling: Place the exterior keypad assembly onto the door, ensuring the cable passes through the cross bore hole.
3. Installer indvendig monteringsplade: Fastgør den indvendige monteringsplade til den udvendige enhed med de medfølgende skruer.
4. Installer indvendig samling: Tilslut kablet fra den udvendige enhed til den indvendige enhed. Monter den indvendige enhed på monteringspladen, og fastgør den.
5. Installer batterier: Insert four (4) AA alkaline batteries into the battery pack.
6. Udfør dørhåndtagningsprocessen: This crucial step teaches the lock the orientation of your door (left or right handed). Follow the specific instructions in your included guide for this process.

Figure 2: Exterior and interior components of the deadbolt.

Betjeningsvejledning

Låsning af døren

• Fra ydersiden: Tryk på låseknappen (hængelåsikonet) på tastaturet. Rigellåsen vil trække sig ud.
• Fra interiøret: Rotate the thumb-turn to the vertical position to extend the deadbolt.

Oplåsning af døren

• Fra ydersiden (tastatur): Enter a valid 4-8 digit user code, then press the Lock button. The deadbolt will retract.
• From Exterior (Key): Insert your physical key into the cylinder and turn to unlock.
• Fra interiøret: Rotate the thumb-turn to the horizontal position to retract the deadbolt.

Programmering af brugerkoder

Your deadbolt can store multiple user codes. Refer to your specific programming guide for detailed steps. Generally, this involves:

1. Entering the Master Code (if enabled).
2. Pressing the Program button.
3. Entering a new user code.
4. Confirming the new user code.

It is recommended to change the default programming code immediately after installation for security.

SmartKey-omkodning

The SmartKey Security feature allows you to re-key your lock yourself in seconds, maintaining security if keys are lost or stolen. You will need your functioning key, the new key, and the SmartKey tool. Follow the instructions provided with your SmartKey tool carefully.

Figur 3: Detaljeret view of the exterior keypad and key cylinder.

Opretholdelse

Udskiftning af batteri

The deadbolt will indicate low battery status with a series of beeps and/or a flashing light. Replace all four (4) AA alkaline batteries simultaneously. Do not mix old and new batteries or different battery types.

1. Fjern det indvendige dæksel.
2. Fjern batteripakken.
3. Replace all four AA batteries, ensuring correct polarity.
4. Reinstall the battery pack and interior cover.

Rensning

Rengør låsens yderside med en blød, damp klud. Undgå slibende rengøringsmidler, opløsningsmidler eller barske kemikalier, da disse kan beskadige overfladen og de elektroniske komponenter.

Smøring

The mechanical components of the lock are designed for long-term performance. If the latch or bolt action becomes stiff, a small amount of graphite lubricant can be applied to the latch bolt mechanism. Avoid oil-based lubricants.

Figur 4: Interiør view of the deadbolt, showing the battery compartment.

Fejlfinding

Fabriksindstilling

If issues persist, a factory reset may be necessary. This will delete all user codes and restore default settings. Refer to your product's specific instructions for the factory reset procedure, as it typically involves removing the battery pack and pressing a program button while reinserting it.

Specifikationer

• Mærke: Kwikset
• Modelnummer: 9270CNT-15S
• Låsetype: Nøglelås, tastatur
• Særlige funktioner: SmartKey Security, Keypad
• Materiale: Rustfrit stål
• Slutte: Satin nikkel
• Emnemål (L x B x H): 10.5 x 5.8 x 4.6 tommer
• Kontrolmetode: Røre
• Forbindelsesprotokol: Wi-Fi (Smart Home Compatible)
• Strømkilde: 4 AA alkaliske batterier (medfølger ikke)
• Anbefalet brug: Securing exterior doors
• Inkluderede komponenter: Mounting hardware and instructions

Garanti og support

Kwikset products are backed by a manufacturer's warranty. For specific warranty details pertaining to your 9270CNT-15S SmartCode Touchpad Electronic Deadbolt, please refer to the warranty information included in your product packaging or visit the official Kwikset webwebsted.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Kwikset Customer Support. Contact information can typically be found on the Kwikset webwebstedet eller i din produktdokumentation.

• Kwikset Officiel Webwebsted: www.kwikset.com
• Kundesupport: Der henvises til website for current contact methods (phone, email, chat).