King Gates Digy Pad Wireless Code Keypad Instruction Manual

1. Introduktion

The King Gates Digy Pad is a wireless radio code keypad designed for use with King Gates gate and door motors. This device replaces the NOVO DIGY model and operates on a frequency of 433.92 Mhz. It offers a reliable and secure method for controlling access to your property, with a robust design and an IP54 protection rating, ensuring durability in various environmental conditions. This manual provides essential information for the proper installation, operation, and maintenance of your Digy Pad keypad.

Figure 1: King Gates Digy Pad wireless code keypad, featuring a numeric keypad (0-9) and additional keys (A, B, C), along with the 'KINGgates made in Italy' logo.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før installation og brug.
• Ensure the keypad is installed in a location that does not obstruct movement of gates or doors.
• Keep the device away from water and extreme temperatures, despite its IP54 rating, to prolong its lifespan.
• Do not attempt to repair or modify the device yourself. Refer to qualified personnel for service.
• Keep batteries out of reach of children. Dispose of batteries responsibly according to local regulations.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• 1 x King Gates Digy Pad Wireless Code Keypad
• 1 x Mounting Hardware (screws, wall plugs)
• 1 x Brugsanvisning (dette dokument)
• Batterier (medfølger muligvis ikke, tjek emballagen)

4. Opsætning og installation

4.1 Valg af installationssted

Select a flat, stable surface near your gate or door motor, within the 100-meter operating range. Ensure the location is easily accessible for users but protected from direct impact or vandalism. Avoid placing it near large metal objects that could interfere with the radio signal.

4.2 Montering af tastaturet

1. Open the keypad casing carefully to access the mounting holes.
2. Mark the drilling points on the chosen surface using the keypad as a template.
3. Drill holes at the marked points, suitable for the provided wall plugs.
4. Sæt vægpropperne i de borede huller.
5. Secure the keypad to the surface using the provided screws. Do not overtighten.
6. Close the keypad casing sikkert.

4.3 Batteriinstallation

The Digy Pad requires specific batteries (refer to the specifications section for type). To install:

1. Locate the battery compartment on the back of the keypad.
2. Åbn dækslet til rummet.
3. Indsæt batterierne, og sørg for korrekt polaritet (+/-).
4. Luk batteridækslet godt.

4.4 Pairing with King Gates Motor

Refer to your King Gates gate/door motor's instruction manual for specific pairing procedures. Generally, this involves:

1. Activating the learning mode on your King Gates motor's receiver unit.
2. Entering a default or new code on the Digy Pad keypad and pressing a confirmation key (e.g., 'A' or 'B').
3. The motor's receiver should confirm successful pairing (e.g., with an LED flash or sound).
4. Test the keypad to ensure it controls the motor correctly.

5. Betjeningsvejledning

5.1 Entering a Code

To operate your gate or door, simply enter your pre-programmed access code using the numeric keys (0-9) on the keypad. After entering the full code, press the designated activation key (e.g., 'A', 'B', or 'C', depending on your motor's configuration and desired action).

5.2 Programming New Codes

The process for programming new access codes is typically managed through the King Gates motor's receiver unit, not directly on the Digy Pad keypad. Consult your motor's manual for detailed instructions on adding, modifying, or deleting access codes associated with the Digy Pad.

5.3 Keypad Functions (A, B, C keys)

The 'A', 'B', and 'C' keys can be programmed to perform different functions or activate different channels on your King Gates motor receiver. For exampdet:

• Nøgle A: Often used for full opening/closing of a gate.
• Nøgle B: May be used for pedestrian opening or partial opening.
• Nøgle C: Could be assigned to control lighting or another auxiliary function.

The specific function of these keys is configured during the pairing process with your King Gates motor. Refer to your motor's manual for customization options.

6. Vedligeholdelse

6.1 Rengøring

Clean the keypad surface periodically with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the keypad's finish or internal components. Ensure no liquid enters the keypad casing.

6.2 Udskiftning af batteri

When the keypad's performance degrades (e.g., reduced range, inconsistent operation), it may be time to replace the batteries. Follow the battery installation steps (Section 4.3) to replace them. Always use new batteries of the specified type.

6.3 Miljøbeskyttelse

While the Digy Pad has an IP54 rating, protecting it from direct, prolonged exposure to heavy rain, snow, or extreme sunlight can extend its lifespan. Consider installing a small protective cover if the keypad is in a highly exposed location.

7. Fejlfinding

8. Specifikationer

• Model: KWJDIGYP
• Mærke: King Gates
• Frekvens: 433.92 Mhz
• Driftsområde: Op til 100 meter (i åben mark)
• Beskyttelsesvurdering: IP54
• Dimensioner: Approximately 12 x 9 x 7 cm (from package dimensions)
• Vægt: Approximately 430 grams (from package dimensions)
• Strømforsyning: Batteries (type not specified in input, typically 9V or AA/AAA)
• Kompatibilitet: King Gates gate and door motors (replaces NOVO DIGY)

9. Garanti og support

Specific warranty information for the King Gates Digy Pad is not provided in this document. Please refer to your purchase receipt or contact the retailer/manufacturer directly for warranty details and support. For technical assistance or troubleshooting beyond this manual, it is recommended to contact King Gates customer service or a certified installer.

You can often find contact information on the King Gates official webwebstedet eller gennem dit produkts emballage.