STIGA BC 545 B Benzin Buskrydder Brugsanvisning

1. Introduktion

Produkt overview

The STIGA BC 545 B is a powerful petrol brushcutter designed for demanding gardening tasks. It features a robust 42.7 cm³ (1.25 kW) 2-stroke engine and a reinforced straight shaft for enhanced durability and reduced vibrations. With a cutting width of 45 cm, it ensures quick and efficient operation over large areas. The ergonomic bike-style handlebar provides a secure grip and improved control, making it suitable for prolonged use. The latest generation Tap&Go Pro dual line head allows for quick line release with a simple tap, while the included 3T metal blade easily handles tougher growth. The provided double transport harness ensures comfort and stability during operation. Additional features include integrated handlebar controls for safety and a protected 1-liter fuel tank. This brushcutter is ideal for both domestic and intensive use.

Figur 1.1: Overview of the STIGA BC 545 B Petrol Brushcutter.

2. Sikkerhedsadvarsler

Opmærksomhed: When operating, flying debris and cuts may occur. Always wear appropriate personal protective equipment.

• Brug altid sikkerhedsbriller eller ansigtsskærm for at beskytte mod flyvende genstande.
• Brug kraftige handsker for at beskytte hænderne.
• Wear long pants and sturdy footwear to protect legs and feet.
• Ensure no bystanders or pets are within the working area. Maintain a safe distance.
• Before starting, inspect the brushcutter for any loose parts, damage, or blockages.
• Do not operate the brushcutter in wet conditions or near flammable materials.
• Always turn off the engine and disconnect the spark plug before performing any maintenance, cleaning, or adjustments.
• Håndter brændstof med ekstrem forsigtighed. Tank op i et godt ventileret område med motoren slukket og afkølet.
• Gør dig bekendt med alle betjeningselementer og sikkerhedsfunktioner inden brug.

3. Produktfunktioner

• Kraftfuld motor: 42.7 cm³ 2-stroke petrol engine with 1.25 kW power for demanding cutting tasks.
• Wide Cutting Width: 45 cm for fast and efficient cutting of grass and brush.
• Ergonomisk styr: Bike-style handle ensures control, comfort, and safe handling during use.
• Komplet sæt: Includes Tap&Go dual line head, 3T metal blade, and double transport harness for increased versatility.
• Reinforced Shaft: The powerful straight shaft reduces vibrations and increases durability for tough tasks.

Figure 3.1: Key features of the STIGA BC 545 B, including the 42.7 cm³ two-stroke engine (1.25 kW), bike-style handlebar with controls, automatic line reload, robust and low-vibration design, double shoulder harness for comfort, 3-tooth metal blade, and dual line trimmer head, and 1.0 liter fuel tank.

Figure 3.2: Close-up of the robust and low-vibration design due to reinforced construction.

Figur 3.3: View of the 42.7 cm³ two-stroke engine (1.25 kW) and 1.0 liter fuel tank, with protection against impacts.

4. Pakkens indhold

The STIGA BC 545 B package typically includes the following components:

• STIGA BC 545 B Brushcutter Unit
• Bike-style Handlebar
• Tap&Go Pro Dual Line Head
• 3T Metal Blade
• Double Transport Harness
• Værktøjssæt (til montering)
• Brugermanual

Figure 4.1: The STIGA BC 545 B brushcutter shown with its included accessories: the double transport harness and the 3T metal blade.

5. Opsætning og montering

5.1 Styrsamling

1. Pak forsigtigt alle komponenter ud.
2. Attach the bike-style handlebar to the main shaft using the provided clamps and bolts. Ensure it is securely fastened and aligned for comfortable operation.
3. Tighten all fasteners firmly but do not overtighten.

5.2 Attaching the Cutting Head

1. Depending on the task, choose between the Tap&Go line head or the 3T metal blade.
2. For the line head: Follow the instructions in the manual to securely attach the Tap&Go head to the gear housing. Ensure the line is properly wound and extended.
3. For the metal blade: Attach the 3T metal blade using the appropriate washers and nut. Ensure the blade is correctly oriented and tightened securely. Brug altid klingeskærmen.

5.3 Fuel Mixture Preparation

The STIGA BC 545 B uses a 2-stroke petrol engine, requiring a specific fuel-oil mixture. Refer to the engine manufacturer's recommendations for the exact mixing ratio (typically 50:1 or 25:1, depending on the oil type). Use high-quality unleaded petrol and a good quality 2-stroke engine oil.

1. Mix the fuel and oil in a separate, approved fuel container.
2. Ryst beholderen grundigt for at sikre korrekt blanding.
3. Carefully pour the mixture into the brushcutter's fuel tank (1.0 liter capacity), avoiding spills.
4. Luk tankdækslet forsvarligt.

6. Betjeningsvejledning

6.1 Start af motoren

1. Placer buskrydderen på en plan, stabil overflade.
2. Sørg for, at skæretilbehøret er fri for eventuelle forhindringer.
3. Set the choke lever to the 'START' or 'COLD START' position (if applicable).
4. Tryk flere gange på primerpumpen, indtil brændstoffet er synligt.
5. Engage the throttle lock (if available) and pull the starter cord firmly until the engine fires.
6. Når motoren starter, skal du gradvist flytte chokerhåndtaget til 'RUN'-positionen.
7. Lad motoren varme op i et par øjeblikke, før du begynder at køre.

Figure 6.1: Operating controls located directly on the handlebar for optimal efficiency and safety.

Figure 6.2: Close-up of the control grip, showing the power switch and throttle trigger.

6.2 Operating the Brushcutter

1. Attach the double transport harness for comfortable and balanced operation.
2. Hold the brushcutter firmly with both hands on the handlebar.
3. Maintain a stable stance and keep the cutting attachment away from your body.
4. Gradually apply throttle to increase the cutting speed.
5. Move the brushcutter in a sweeping motion, cutting from right to left for optimal efficiency with the line head, or as appropriate for the blade.
6. Avoid hitting hard objects like rocks or metal, especially when using the metal blade.

6.3 Standsning af motoren

1. Release the throttle to allow the engine to return to idle speed.
2. Press the engine stop switch (usually located on the handlebar controls) to turn off the engine.
3. Wait for all moving parts to come to a complete stop before setting the brushcutter down.

7. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your STIGA BC 545 B brushcutter. Always ensure the engine is off and cool before performing any maintenance.

7.1 Generel rengøring

• After each use, clean the brushcutter thoroughly, removing grass, dirt, and debris from the engine housing, cutting head, and shaft.
• Use a brush or compressed air for hard-to-reach areas.
• Inspect the blade guard for damage and ensure it is securely attached.

7.2 Vedligeholdelse af luftfilter

• Check the air filter regularly (e.g., every 10-15 hours of operation).
• Remove the air filter cover and take out the filter element.
• Clean foam filters with warm soapy water, rinse, and allow to dry completely. Lightly oil before reinstallation.
• Replace paper filters if heavily soiled or damaged.

7.3 Tændrørsvedligeholdelse

• Efterse tændrøret hver 25-30 driftstimer.
• Fjern tændrøret med en tændrørsnøgle.
• Clean any carbon deposits with a wire brush.
• Check the electrode gap and adjust if necessary according to the manual's specifications.
• Replace the spark plug if it is worn or damaged.

7.4 Blade/Line Head Replacement

• Line Head: Replace the trimmer line when it becomes too short or worn. Follow the instructions for your Tap&Go head to reload the line.
• Metalblad: Sharpen or replace the 3T metal blade when it becomes dull or damaged. Always use appropriate protective gear and tools for blade maintenance.

7.5 Opbevaring

• Før langtidsopbevaring skal brændstoftanken tømmes, eller motoren skal køres, indtil den løber tør for brændstof, for at forhindre brændstofforringelse.
• Rengør buskrydderen grundigt.
• Opbevares tørt og godt ventileret, væk fra direkte sollys og ekstreme temperaturer.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized STIGA dealer. STIGA products typically come with a manufacturer's warranty covering defects in materials and workmanship under normal use.

If you encounter any issues or require technical assistance, please contact STIGA customer support or an authorized service center. Ensure you have your product model number (BC 545 B) and serial number (if applicable) ready when contacting support.

For spare parts availability, please consult your local STIGA dealer or the official STIGA website, as information on spare parts availability is not directly provided here.