1. Introduktion
The Teltonika TRB500 is an industrial 5G gateway designed for high-speed cellular connectivity. It supports 5G technology, offering speeds up to 1 Gbps, and is backward compatible with 4G (LTE CAT 20) and 3G networks. This device features Gigabit Ethernet for reliable data throughput, SA & NSA architecture support, and ultra-low latency for critical applications. Its compact design makes it suitable for various industrial environments.
Billede 1.1: Overview of the Teltonika TRB500 Industrial 5G Gateway.
2. Opsætningsvejledning
2.1. Pakkens indhold
Før du fortsætter med opsætningen, skal du sørge for, at alle komponenter er til stede:
- TRB500 Gateway
- 9 W Power Supply Unit (PSU)
- 4x mobilantenner (drejelig, SMA han)
- Mikro-USB-kabel (0.8 m)
- Ethernet-kabel
- SIM-adaptersæt
- Hurtig startguide (QSG)
2.2. Komponentidentifikation
Image 2.1: Front panel of the TRB500, showing Power socket, USB port, SIM holder, and LAN port.
Image 2.2: Back panel of the TRB500, showing Mobile antenna connectors, Reset button, and Grounding screw.
2.3. SIM-kort installation
- Locate the SIM holder on the front panel of the TRB500 (refer to Image 2.1).
- Using the provided SIM adapter kit if necessary, insert your active Nano-SIM card into the SIM slot. Ensure the SIM card is inserted correctly with the gold contacts facing down and the notched corner aligned.
- Push the SIM card until it clicks into place.
2.4. Antennetilslutning
- Identify the four mobile antenna connectors on the back panel of the TRB500 (refer to Image 2.2).
- Attach the four provided mobile antennas to these connectors. Hand-tighten them securely.
- Placer antennerne for optimal signalmodtagelse.
2.5. Strømtilslutning
- Connect the 9 W PSU to the power socket on the front panel of the TRB500 (refer to Image 2.1).
- Plug the PSU into a suitable power outlet. The device will power on automatically.
2.6. Ethernet Connection (Optional)
- Connect one end of the Ethernet cable to the LAN port on the front panel of the TRB500 (refer to Image 2.1).
- Connect the other end of the Ethernet cable to your computer or network switch.
2.7. Indledende adgang
The default IP address for accessing the TRB500's web interface er 192.168.1.1. Ensure your computer's network settings are configured to obtain an IP address automatically (DHCP) or set a static IP address within the same subnet (e.g., 192.168.1.10).
3. Betjeningsvejledning
3.1. Web Interface adgang
- Åbn a web browser on a computer connected to the TRB500 via Ethernet.
- Enter the default IP address (192.168.1.1) into the browser's address bar and press Enter.
- You will be prompted for login credentials. Refer to the Quick Start Guide or the device label for default username and password. It is recommended to change these credentials upon first login for security.
3.2. LED-indikatorer
The TRB500 features several LED indicators on its front panel to provide status information:
- PWR LED: Indikerer strømstatus.
- 3G/4G/5G LEDs: Indicate the current cellular network technology in use.
- Signalstyrke LED'er: Indicate the strength of the cellular signal. More illuminated LEDs mean a stronger signal.
Image 3.1: Front panel LEDs indicating network status and signal strength.
3.3. Netværkskonfiguration
The TRB500 operates on RouterOS, providing extensive configuration options through its web interface. You can configure:
- Cellular settings (APN, band selection)
- Network modes (Router, Bridge)
- Firewall regler
- VPN services (e.g., OpenVPN)
- Input/Output (I/O) functionality
3.4. Remote Management System (RMS)
The TRB500 is compatible with the Teltonika Remote Management System (RMS). RMS allows for centralized monitoring, configuration, and management of multiple Teltonika devices from a single platform. This is particularly useful for large-scale deployments or remote installations.
Billede 3.2: Eks.ample application diagram illustrating wireless and wired data connections with the TRB500.
4. Vedligeholdelse
4.1. Firmwareopdateringer
Regular firmware updates are released to improve performance, add features, and address security vulnerabilities. It is recommended to keep your TRB500's firmware up to date. Firmware updates can typically be performed through the device's web interface. Always back up your device configuration before initiating a firmware update.
4.2. Scheduled Reboots
For optimal performance and to mitigate potential cellular network disconnections (which can occur with some data providers after extended periods), configuring a daily scheduled reboot is recommended. This can usually be set up within the device's system settings in the web interface, f.eksample, at 03:00 AM daily.
5. Fejlfinding
5.1. No Internet Connectivity
- Tjek SIM-kort: Sørg for, at SIM-kortet er korrekt isat og aktivt med en dataplan.
- Antenneforbindelse: Verify all mobile antennas are securely connected and positioned for optimal signal.
- LED-indikatorer: Check the 3G/4G/5G and Signal Strength LEDs. If no network LED is lit or signal is weak, try repositioning the device or antennas.
- APN-indstillinger: Confirm the correct Access Point Name (APN) is configured in the web interface for your cellular provider. The TRB500 supports Auto APN, but manual configuration may be required for some carriers.
- Transportørkompatibilitet: Some cellular networks may exhibit instability with certain devices. If issues persist, consult your cellular provider or Teltonika support.
5.2. Device Unresponsive / Cannot Access Web Interface
- Power Cycle: Afbryd og tilslut strømforsyningen igen.
- Ethernet-forbindelse: Ensure your computer is directly connected to the TRB500 via Ethernet and network settings are correct.
- Nulstil knap: If the device remains unresponsive, locate the reset button on the back panel (refer to Image 2.2). Use a thin object (e.g., a paperclip) to press and hold the button for approximately 10 seconds to restore factory default settings. Advarsel: Dette vil slette alle brugerdefinerede konfigurationer.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Teltonica |
| Modelnavn | TRB500 |
| Varemodelnummer | TRB500 |
| Trådløs type | 802.11ax (Note: This specification might refer to internal components or compatibility, as the TRB500 is primarily a cellular gateway) |
| Operativsystem | RouterOS |
| Forbindelsesteknologi | LAN, 5G Cellular |
| Varens vægt | 8.5 ounce |
| Produktmål (LxBxH) | 19.69 x 19.69 x 11.02 tommer |
| Farve | Grå |
| Voltage | 30 volt (DC) |
| Speciel funktion | WPS (Wi-Fi Protected Setup - Note: TRB500 is a cellular gateway, this might refer to a feature in its software or a related product line) |
| Kompatible enheder | Personlig computer |
| Anbefalet anvendelse af produktet | Home (Note: While usable at home, its industrial features are geared towards professional applications) |
7. Garantioplysninger
The Teltonika TRB500 Industrial 5G Gateway comes with an 18 måneders garanti from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use conditions. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
8. Support
For further assistance, technical support, or detailed documentation, please visit the official Teltonika Networks website or contact their customer support. Ensure you have your device's model number and serial number ready when seeking support.
