1. Produktet er slutview
The Wishiot Mini Super Light 3.7g Digital Servo GH-S37D is a compact and lightweight digital servo designed for precise control in various remote-controlled applications, including aircraft, helicopters, and boats. Its small size and low weight make it ideal for models where space and weight are critical factors. This servo provides reliable performance with a digital control system.
Figur 1: The Wishiot GH-S37D Digital Servo shown with its included accessories, such as various servo horns and mounting screws. The servo features a blue translucent casing and a standard 3-pin connector.
Pakkeindhold:
- 1 x Wishiot Mini Super Light 3.7g Digital Servo GH-S37D
- Assorted Servo Horns
- Monteringsskruer
2. Specifikationer
Refer to the table below for detailed technical specifications of the GH-S37D Digital Servo.
Figur 2: A detailed specification table for the GH-S37D servo, outlining its performance characteristics and physical dimensions.
| Parameter | Værdi |
|---|---|
| Torque (3.6V) | 0.5 kg / cm |
| Torque (4.8V) | 0.7 kg / cm |
| Operation Voltage | 3.6V - 4.8V |
| Driftshastighed (3.6 V) | 0.12 sec/60 degrees |
| Driftshastighed (4.8 V) | 0.1 sec/60 degrees |
| Driftstemperatur | 0 - 60°C (32 - 140°F) |
| Teeth Material | Plast |
| Standard Signal | 1000 til 2000 mikrosekunder |
| Dead Band Width | 4 brug |
| Working Degree | 90 grader |
| Kabellængde | 150 mm |
| Vægt | 3.7 g |
| Dimensioner (L x B x H) | 20.05 x 8.75 x 22 mm (ca. 0.8 x 0.34 x 0.87 tommer) |
| Servo type | Digital Servo |
Figur 3: Technical drawing illustrating the precise dimensions of the GH-S37D servo in millimeters.
3. Opsætning og ledningsføring
Proper connection of the servo to your control system is crucial for correct operation. The GH-S37D servo uses a standard 3-pin connector.
3.1 Wire Color Code:
- Hvid ledning: Signal (PWM input)
- Rød ledning: Positive Power (+)
- Sort ledning: Negative Power / Ground (-)
Figur 4: The GH-S37D servo with its three-wire connector, clearly indicating the white (signal), red (positive), and black (negative) wires.
3.2 Connecting to a Servo Tester:
To test the servo or for basic control without a full RC system, you can connect it to a servo tester. Ensure the polarity is correct.
Figur 5: The GH-S37D servo connected to a servo tester for functional testing. The servo's black wire connects to 'Out -', red to 'Out +', and white to 'Out S' on the tester.
| 3.7G Servo Wire | Servo Tester Connection |
|---|---|
| Sort ledning | Out - |
| Rød ledning | Ud + |
| Hvid ledning | Out S |
3.3 Connecting to a Microcontroller (e.g., Arduino UNO):
For custom projects, the servo can be controlled by a microcontroller. Below is a common connection scheme for an Arduino UNO.
Figur 6: The GH-S37D servo wired to an Arduino UNO board. The servo's black wire connects to GND, red to 3.3V, and white to digital pin D9 on the Arduino.
| 3.7G Servo Wire | Arduino UNO Connection |
|---|---|
| Sort ledning | GND |
| Rød ledning | 3.3V |
| Hvid ledning | D9 (Digital Pin 9) |
Note: Ensure your microcontroller can supply sufficient current for the servo, especially under load. An external power supply may be required for multiple servos or high-load applications.
4. Betjening
The GH-S37D is a digital servo, meaning it receives a Pulse Width Modulation (PWM) signal to determine its position. The servo operates within a 90-degree range.
- Styresignal: The white signal wire receives PWM pulses, typically from a receiver or microcontroller. The pulse width dictates the servo's angular position.
- Rotation: The servo horn will rotate to the commanded position and hold that position against external forces within its torque limits.
- Driftsområde: The standard signal range of 1000 to 2000 microseconds corresponds to the full 90-degree working range of the servo.
Figur 7: Et nærbillede view of the high-precision plastic gears inside the servo, responsible for its movement and torque transmission.
5. Vedligeholdelse
To ensure the longevity and optimal performance of your GH-S37D servo, follow these maintenance guidelines:
- Hold rent: Protect the servo from dust, dirt, and moisture, which can interfere with the gears and electronics.
- Undgå overbelastning: Do not apply excessive force to the servo horn or attempt to rotate it beyond its mechanical limits, as this can damage the internal gears or motor.
- Tjek forbindelser: Periodically inspect the wiring for any signs of wear, fraying, or loose connections.
- Opbevaring: Store the servo in a dry, cool environment when not in use.
6. Fejlfinding
If you encounter issues with your GH-S37D servo, consider the following troubleshooting steps:
- Servo Not Moving:
- Verify power supply: Ensure the servo is receiving the correct voltage (3.6V-4.8V) and sufficient current.
- Check wiring: Confirm all connections (signal, positive, negative) are secure and correctly polarized.
- Test signal source: Use a servo tester or known working control system to check if the signal source is functioning correctly.
- Erratic Movement or Jittering:
- Check for interference: Ensure the servo wires are not running too close to high-current wires or motors that could cause electrical interference.
- Power supply issues: Insufficient or unstable power can cause erratic behavior. Try a different power source or add a capacitor to stabilize voltage.
- Signal quality: A noisy or weak signal from the receiver/microcontroller can lead to jitter.
- Servo Not Holding Position:
- Overload: The load on the servo might exceed its torque capabilities. Reduce the load or consider a higher torque servo.
- Mechanical binding: Check for any physical obstructions preventing smooth movement of the servo horn or the mechanism it controls.
7. Garanti og support
For any questions, technical assistance, or mass customization inquiries regarding your Wishiot GH-S37D Digital Servo, please contact Wishiot customer support.
You can typically find a "Contact Seller" or "Ask a question" link on the product's purchase page or by visiting the official Wishiot store on the platform where you purchased the product.