KLH MODEL5MBPR
KLH Model Five 3-Way 10-inch Acoustic Suspension Floorstanding Speaker Manual
Model: MODEL5MBPR | Brand: KLH
Indledning
Thank you for choosing the KLH Model Five Acoustic Suspension Floorstanding Speakers. These speakers are designed to deliver exceptional audio fidelity and are a modern reinterpretation of a classic design. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure years of listening enjoyment.
The Model Five features an acoustic suspension design, a dedicated midrange driver, and a 10-inch woofer, all contributing to its accurate and linear sound reproduction. Each speaker includes a 5-degree slant riser base for optimal listening angle.

Image: A pair of KLH Model Five speakers in Nordic Noir finish, shown with their protective grilles attached and resting on their custom 5-degree slant riser bases. The speakers are positioned upright, showcasing their elegant, classic design.
Unpacking and What's in the Box
Carefully unpack your KLH Model Five speakers. Inspect the contents for any signs of damage during transit. If any components are missing or damaged, please contact KLH customer support immediately.
Kassens indhold:
- KLH Model Five Floorstanding Speaker (Pair)
- 5-degree slant riser base (Pair)
- Brugermanual (dette dokument)

Billede: Et nærbillede view of the lower front portion of a KLH Model Five speaker, highlighting the metallic KLH badge on the fabric grille and the sturdy construction of the speaker's base and the 5-degree slant riser.
Opsætning
Højttalerplacering:
Optimal speaker placement is crucial for sound quality. Position the speakers symmetrically in your listening room, ideally forming an equilateral triangle with your primary listening position. Keep them away from corners and walls to avoid excessive bass resonance. The included 5-degree slant riser bases are designed to angle the speakers slightly upwards for improved sound dispersion when seated.

Image: A pair of KLH Model Five speakers integrated into a modern living room setup. The speakers are placed on either side of a media console, connected to audio equipment, demonstrating a typical home audio arrangement.
Forbinder til din Amplivligere:
Sørg for din amplifier is turned off before making any connections. Use high-quality speaker cables to connect the KLH Model Five speakers to your amplifier. Connect the positive (+) terminal on the speaker to the positive (+) terminal on the ampog den negative (-) terminal på højttaleren til den negative (-) terminal på amplifier. Maintain correct polarity for both speakers to ensure proper stereo imaging.

Billede: En detaljeret view of the rear input panel of the KLH Model Five speaker. It shows the binding posts for speaker wire connection and the 'MID-HF LEVEL' control knob, which allows for acoustic balance adjustment.
Drift
Acoustic Balance Control:
The KLH Model Five speakers feature a unique Three-Position Acoustic Balance Control located on the rear panel. This control allows you to tailor the loudspeaker's output to suit your room's acoustics and personal preference. The settings are typically labeled LO, MID, and HI, adjusting the mid-high frequency level.
- LO: Reduces mid-high frequencies, suitable for bright rooms or when a warmer sound is desired.
- MID: Neutral setting, suitable for most listening environments.
- Hej: Boosts mid-high frequencies, suitable for acoustically damped rooms or when more detail is desired.
Experiment with these settings to find the optimal balance for your listening space and musical taste.
Fjernelse af gitter:
The Model Five speakers come with low-profile, magnet-attached grilles. These grilles are designed to protect the drivers and can be easily removed for a different aesthetic or for critical listening, as some audiophiles prefer listening without grilles. To remove, gently pull the grille away from the speaker cabinet. To reattach, align the grille with the cabinet and allow the magnets to secure it in place.

Image: A pair of KLH Model Five speakers shown without their front grilles, revealing the 10-inch woofer, midrange driver, and tweeter. The silver rings around the drivers provide a striking contrast against the black cabinet.
Opretholdelse
To maintain the appearance and performance of your KLH Model Five speakers, follow these guidelines:
- Rengøring af skabe: Brug en blød, tør klud til at tørre kabinettets overflader af. Ved genstridige mærker kan du bruge en let tør klud.amp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents, as they can damage the finish.
- Rengøring af riste: The fabric grilles can be gently vacuumed with a brush attachment to remove dust. Do not wash or immerse the grilles in water.
- Førerpleje: Avoid touching the speaker drivers (woofer, midrange, tweeter) directly, as this can cause damage.
- Placering: Keep speakers away from direct sunlight, heat sources, and excessive moisture to prevent damage to the cabinet and internal components.
Fejlfinding
If you experience issues with your KLH Model Five speakers, consult the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra den ene eller begge højttalere | Forkert ledningsføring; Amplifier off or faulty; Source device issue. | Check speaker cable connections for correct polarity (+ to + and - to -). Ensure amplifier is powered on and functioning. Verify source device (e.g., turntable, streamer) is connected and playing audio. |
| Forvrænget eller uklar lyd | Overstyring amplifier; Loose connections; Room acoustics. | Reducere amplifier volume. Check all cable connections. Adjust the Acoustic Balance Control on the rear of the speaker. Consider room treatments if distortion persists. |
| Svag eller buldrende bas | Speaker placement; Room acoustics. | Move speakers further from walls or corners to reduce boominess. Experiment with speaker placement to find optimal bass response. |
| Uneven soundstage or imaging | Incorrect speaker placement; Polarity issue. | Ensure speakers are equidistant from the listening position and symmetrically placed. Double-check speaker wire polarity for both speakers. |
If the problem persists after attempting these solutions, please contact KLH customer support.
Specifikationer
Detailed technical specifications for the KLH Model Five Floorstanding Speakers:
| Feature | Detalje |
|---|---|
| Modelnavn | Model fem |
| Højttaler type | Tower, 3-Way Acoustic Suspension |
| Bashøjttaler diameter | 10 tommer |
| Diskant-diameter | 1 tommer |
| Frekvensrespons | 20 KHz (upper limit provided) |
| Særlige funktioner | Acoustic suspension design, dedicated midrange driver, high-excursion woofer, aluminum dome tweeter, 12 component crossover network, Three-Position Acoustic Balance Control |
| Forbindelsesteknologi | Kablet |
| Lydudgangstilstand | Omgive |
| Monteringstype | Floor Mount (with included 5-degree slant riser base) |
| Farve | Matte Black (Nordic Noir) |
| Produktdimensioner | 18"D x 18"W (dimensions provided are partial, typically height is also included for floorstanding speakers) |
| Varens vægt | 122 pund (pr. par) |
| Fabrikant | KLH |
| Varemodelnummer | MODEL5MBPR |
| UPC | 683950296077 |
Garantioplysninger
KLH provides a full warranty for the Model Five speakers. For specific details regarding the duration and terms of your warranty, please refer to the warranty card included with your product or visit the official KLH webwebsted. Gem din købsbevis til garantikrav.
Kundesupport
For technical assistance, service, or any questions regarding your KLH Model Five speakers, please contact KLH customer support. You can typically find contact information on the KLH official webhjemmeside eller gennem din autoriserede forhandler.
Online ressourcer: Visit the official KLH webwebsted for ofte stillede spørgsmål, produktregistrering og yderligere supportmaterialer.
Kontaktoplysninger: Refer to the packaging or KLH's official webwebstedet for de seneste kontaktoplysninger, herunder telefonnumre og e-mailadresser.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.