Andoer AC-04 Wireless Trigger System

1. Introduktion

This manual provides detailed instructions for the safe and effective use of your Andoer AC-04 Wireless Trigger System. This system is designed to wirelessly trigger studio flash lights, enhancing flexibility and efficiency in photographic setups. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Sikkerhedsoplysninger

For at forhindre skader på produktet eller personskade på dig selv eller andre, skal du overholde følgende sikkerhedsforanstaltninger:

• Udsæt ikke enheden for vand eller for høj luftfugtighed.
• Undgå at tabe eller udsætte enheden for kraftige stød.
• Forsøg ikke at skille enheden ad eller ændre den. Reparationer bør kun udføres af autoriseret servicepersonale.
• Hold enheden væk fra stærke magnetiske felter.
• Brug kun de angivne strømkilder og tilbehør.
• Sørg for tilstrækkelig ventilation under brug for at forhindre overophedning.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x Wireless Transmitter Unit
• 1 x Wireless Receiver Unit (AC-04)
• 1 x 3.5 mm til 6.35 mm adapter

Figur 3.1: All components of the Andoer AC-04 Wireless Trigger System, including the transmitter, receiver, and the 3.5mm to 6.35mm adapter.

4. Produktet er slutview

The Andoer AC-04 Wireless Trigger System consists of a transmitter and a receiver, designed for reliable wireless control of studio flash units. It features 4 selectable channels to avoid interference.

4.1. Senderenhed

The transmitter unit mounts onto your camera's hot shoe. It sends the trigger signal to the receiver when the camera's shutter is released.

Figur 4.1: The transmitter unit (top left) with its cold shoe mount and the receiver unit (bottom right) labeled AC-04.

4.2. Receiver Unit (AC-04)

The receiver unit connects to your studio flash light. It receives the signal from the transmitter and triggers the flash. It features a power input and a sync port.

Figur 4.2: The AC-04 receiver unit connected to its power cable and sync cable, alongside the transmitter and adapter.

4.3. 3.5mm to 6.35mm Adapter

This adapter ensures compatibility with various studio flash units that may have either a 3.5mm or 6.35mm sync port.

Figur 4.3: Detaljeret view of the 3.5mm jack, the 6.35mm adapter, and the power input/output connectors.

5. Opsætning

Follow these steps to set up your wireless trigger system:

1. Installer batterier (hvis relevant): The product description does not specify battery requirements. If your units require batteries, insert them according to the polarity markings.
2. Monter senderen: Slide the transmitter unit onto your camera's hot shoe. Ensure it is securely fastened.
3. Connect the Receiver to Flash:
   • Connect the power cable of the receiver unit to a suitable power outlet.
   • Identify the sync port on your studio flash light.
   • Connect the sync cable from the receiver to the flash unit. If your flash unit has a 6.35mm port, use the provided 3.5mm to 6.35mm adapter.
4. Vælg kanaler: Both the transmitter and receiver units have channel selectors (typically switches labeled 1-4). Set both units to the same channel to ensure proper communication. For example, if the transmitter is set to channel 1, the receiver must also be set to channel 1.

6. Betjeningsvejledning

Once setup is complete, operate the system as follows:

1. Tænd: Ensure both your camera and studio flash unit are powered on. The receiver unit should also be powered on (if it has a separate power switch).
2. Testudløser: Most transmitters have a test button. Press this button to manually trigger the flash and confirm the connection. The flash should fire.
3. Tage billeder: With the system properly configured and tested, you can now take photos. When your camera's shutter is released, the transmitter will send a signal to the receiver, triggering the studio flash.
4. Change Channels (if needed): If you experience interference from other wireless devices, change the channel on both the transmitter and receiver to a different matching channel (e.g., from 1 to 2).

7. Vedligeholdelse

Proper care and maintenance will extend the life of your wireless trigger system:

• Rensning: Brug en blød, tør klud til at rengøre enhedernes yderside. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
• Opbevaring: When not in use, store the units in a cool, dry place, away from direct sunlight and extreme temperatures.
• Udskiftning af batteri: If the units use batteries, replace them when performance degrades or if the units will be stored for an extended period to prevent leakage.
• Kabelinspektion: Regularly inspect all cables for signs of wear or damage. Replace damaged cables immediately.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

Andoer products are manufactured to high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Andoer webwebsted. Gem venligst din købsbevis til garantikrav.