TAMIYA 85029-000
Tamiya Spray Lacquer TS-29 Semi-Gloss Black
Model: 85029-000
1. Produktet er slutview
The Tamiya Spray Lacquer TS-29 Semi-Gloss Black is a high-quality synthetic lacquer spray paint designed for model kits and various hobby applications. This 100ml aerosol can provides a durable, semi-gloss black finish suitable for both indoor and outdoor use. It is formulated to dry quickly and offer excellent coverage on a variety of surfaces.

Figur 1: En fuld view of the Tamiya Color Mini spray can, featuring the TS-29 Semi-Gloss Black lacquer paint.

Figure 2: A hexagonal color swatch indicating the TS-29 Semi-Gloss Black shade.
2. Generelle sikkerhedsoplysninger
Always read and follow all warnings and instructions on the product label before use. This product is intended for adult use (recommended age 14 years and up).
- Brandfarlig: Holdes væk fra varme, gnister, åben ild og varme overflader. Rygning forbudt.
- Ventilation: Use only in a well-ventilated area. If using indoors, ensure adequate airflow by opening windows and doors, or use a fan.
- Personligt beskyttelsesudstyr: Wear appropriate eye protection (safety glasses) and gloves to prevent skin contact. Consider wearing a respirator if ventilation is insufficient.
- Indånding: Avoid breathing spray mist. If inhaled, move to fresh air.
- Hud- og øjenkontakt: In case of contact, wash thoroughly with soap and water. For eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
- Opbevares utilgængeligt for børn: Opbevares sikkert og utilgængeligt for børn og kæledyr.
- Bortskaffelse: Dispose of contents and container in accordance with local, regional, national, and international regulations. Do not puncture or incinerate can, even after use.
3. Opsætning og klargøring
- Forberedelse af overfladen: Ensure the surface to be painted is clean, dry, and free of dust, grease, oil, and other contaminants. Lightly sand glossy surfaces for better adhesion.
- Maskering: Use painter's tape or masking film to protect areas not intended for painting.
- Miljøforhold: Apply in a well-ventilated area. Ideal temperature for application is between 68°F and 77°F (20°C and 25°C) with moderate humidity. Avoid painting in direct sunlight or extremely humid conditions.
- Rystedåse: Ryst spraydåsen kraftigt i mindst et minut efter at blandekuglen begynder at rasle. Fortsæt med at ryste med jævne mellemrum under påføring for at sikre ensartet farve og finish.
- Testspray: Before applying to your main project, perform a test spray on a scrap piece of material to check color, spray pattern, and compatibility.
4. Brugsanvisning (applikation)
- Holding the Can: Hold the can upright, approximately 8-12 inches (20-30 cm) from the surface.
- Sprøjteteknik: Apply paint in thin, even coats using a steady, sweeping motion. Overlap each pass slightly to ensure uniform coverage. Avoid applying thick coats, as this can lead to drips, runs, and uneven drying.
- Flere lag: For best results, apply several thin coats rather than one heavy coat. Allow sufficient drying time between coats.
- Tørretider: The paint is typically touch-dry within 30 minutes to 1 hour, depending on environmental conditions and coat thickness. For full cure and maximum durability, allow 24 hours (1 day) before handling or applying additional layers.

Figure 3: An illustration of how to properly hold the Tamiya spray paint can for application, showing a hand gripping the can with the index finger on the nozzle.
5. Vedligeholdelse og opbevaring
- Rengøring af dysen: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean with a cloth.
- Opbevaring: Store the spray can in a cool, dry place, away from direct sunlight, heat sources, and freezing temperatures. Ensure the cap is securely placed on the can.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uneven spray pattern or sputtering | Insufficient shaking; clogged nozzle; low temperature. | Shake can vigorously; clean nozzle; warm can to room temperature. |
| Drips or runs | Applying too much paint; holding can too close. | Apply thinner coats; increase distance from surface. |
| Dårlig vedhæftning | Surface not clean or properly prepared. | Ensure surface is clean, dry, and lightly sanded if glossy. |
| Dysen er tilstoppet | Paint dried in nozzle. | Invert can and spray until clear propellant comes out after each use. If severely clogged, replace nozzle. |
7. Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | TAMIYA |
| Modelnummer | 85029-000 |
| Farve | Sort |
| Finish Type | Halvblank |
| Varevolumen | 100 milliliter (3.3814 væskeounces) |
| Malingstype | Lak spray |
| Overfladeanbefaling | Indendørs, Udendørs |
| Vareformular | Aerosol |
| Er vandtæt | ægte |
| Fuld hærdetid | 1 Day (24 Hours) |
| Produktdimensioner | 2.05 x 2.05 x 4.13 tommer |
| Varens vægt | 4.1 ounce |
| Producent anbefalet alder | 14 år og opefter |
8. Garanti og support
For specific warranty information and customer support regarding your Tamiya Spray Lacquer TS-29 Semi-Gloss Black, please refer to the official Tamiya website or contact the retailer from whom the product was purchased. Warranty terms and support options may vary by region and point of sale.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.