1. Introduktion
The TAKSTAR WPM-300 is a UHF wireless in-ear monitor receiver designed for professional audio monitoring applications. This device operates within the 520-600MHz frequency range, offering 10 selectable channels for stable signal reception. It is intended for use with a compatible TAKSTAR WPM-300 transmitter (sold separately) to provide clear, low-latency audio monitoring for performers, presenters, and audio engineers.
2. Pakkens indhold
Tjek venligst pakken for følgende varer:
- 1 x WPM-300 Bodypack Receiver
- 1 x Pair of In-Earphones
3. Produktet er slutview
Familiarize yourself with the components and controls of the WPM-300 receiver.
Figur 3.1: Labeled diagram of the WPM-300 receiver components.
- LED-indikator: Viser strøm- og forbindelsesstatus.
- Hovedtelefonstik: 3.5mm output for connecting in-earphones.
- Ekstern antenne: For receiving UHF wireless signals.
- Power knap: Tænder/slukker modtageren.
- LED skærm: Displays current channel, battery level, and connection status.
- Switch Frequency Button (SET): Used to enter channel selection mode.
- Lydstyrkekontrol (+/-): Adjusts the audio output level to the earphones.
Figur 3.2: The HD LED screen provides clear status information.
4. Opsætning
4.1 Batteriinstallation
The WPM-300 receiver operates on two AA batteries. To install:
- Find batteridækslet på bagsiden af modtageren.
- Skub dækslet åbent.
- Isæt to AA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet i batterirummet.
- Luk batterirummets dæksel forsvarligt.
4.2 Tilslutning af øretelefoner
Connect the provided in-earphones to the 3.5mm headphone jack on the top of the receiver.
4.3 Første opstart og parring
To power on the receiver and establish a connection with a compatible WPM-300 transmitter:
- Tryk og hold på Power knap on the side of the receiver until the LED screen illuminates.
- Ensure your WPM-300 transmitter is powered on and transmitting on a desired channel.
- På modtageren skal du trykke på SÆT button to enter channel selection mode. The channel number on the LED screen will flash.
- Brug + og - buttons to select the same channel as your transmitter.
- Once the channels match, the receiver will automatically pair with the transmitter. The channel number on the LED screen will stop flashing, and the signal strength indicator will show activity.
- Juster lydstyrken ved hjælp af + og - buttons on the receiver to a comfortable listening level.
Figur 4.1: The lightweight bodypack receiver is designed for portability.
5. Betjeningsvejledning
5.1 Kanalvalg
To change the receiving channel:
- Tryk på SÆT button. The current channel number on the LED screen will begin to flash.
- Brug + or - buttons to cycle through the available channels (CH01-CH10).
- Once the desired channel is displayed, wait a few seconds. The channel number will stop flashing, indicating the new channel is set and the receiver is attempting to connect.
5.2 Lydstyrkejustering
Adjust the monitoring volume using the + og - buttons located next to the SET button. Press + for at øge volumen og - for at sænke lydstyrken.
5.3 Sluk
For at slukke modtageren skal du trykke på og holde Power knap until the LED screen turns off.
6. Vedligeholdelse
Proper care ensures the longevity and optimal performance of your WPM-300 receiver.
- Rensning: Use a soft, dry cloth to clean the exterior of the receiver. Avoid using harsh chemicals or abrasive materials.
- Opbevaring: Opbevar modtageren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Batteripleje: Fjern batterierne, hvis enheden ikke skal bruges i længere tid, for at forhindre lækage.
- Antenne: Handle the external antenna with care to avoid bending or breaking.
7. Fejlfinding
If you encounter issues with your WPM-300 receiver, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra høretelefoner | Low battery; Incorrect channel; Earphones not connected; Transmitter off or out of range; Volume too low. | Replace batteries; Match receiver channel to transmitter; Ensure earphones are fully plugged in; Check transmitter status and range; Increase receiver volume. |
| Interference or poor audio quality | Other wireless devices on the same frequency; Receiver too far from transmitter; Obstructions between receiver and transmitter. | Change to a different channel on both receiver and transmitter; Move closer to the transmitter; Ensure a clear line of sight. |
| Receiver does not power on | Døde eller forkert isatte batterier. | Replace batteries with fresh ones; Verify correct battery polarity. |
8. Tekniske specifikationer
Detailed specifications for the WPM-300 receiver:
- Frekvensområde: 520-600 MHz
- Operation Voltage: DC 2.5V (2.2V-3.0V) / two AA batteries
- Driftsstrøm: 115mA (TYP)
- Frekvensrespons: 20Hz-15 kHz (-6dB intercept point)
- S/N-forhold: > 60dB
- Modtagelsesfølsomhed: Better than 8dBuV
- Stereoseparation: >45dB
- Dimensioner: 169 mm × 64 mm × 30.95 mm
- Vægt: Ca. 123.5 g
- Batterilevetid: Op til 6 timer (med AA-batterier)
- Forbindelse teknologi: Trådløs (RF)
- Hovedtelefonstik: 3.5 mm Jack
- Kontroltype: Volume Control, Channel Selection
9. Garanti og support
TAKSTAR provides a 12-month manufacturer assurance for this product. For technical support, warranty claims, or further assistance, please contact TAKSTAR customer service through their official channels or the retailer from whom the product was purchased.