FEETMOR heating ankle brace

FEETMOR Heated Ankle Wrap Instruction Manual

Model: heating ankle brace

Produkt overview

The FEETMOR Heated Ankle Wrap is designed to provide deep thermal therapy to the ankle and foot area. This cordless, rechargeable device can assist in alleviating muscle stiffness, foot pain, and muscle tension, and may promote blood circulation. Its portable design allows for use at home or on the go.

The wrap features a three-dimensional pocket for the battery, ensuring comfort and freedom of movement. It is designed to fit most foot and ankle sizes, with a heating area of approximately 6 x 9 inches, covering common pain areas such as the Achilles tendon.

FEETMOR Heated Ankle Wrap worn on a foot, showing the heating elements and adjustable straps.

Image: FEETMOR Heated Ankle Wrap in use, highlighting its design and heating zones.

Opsætningsinstruktioner

  1. Oplad batteriet: Fully charge the provided Lithium Polymer battery using the included 8.4V USB charger. The charger has a 57-inch long power cord.
  2. Indsæt batteri: Locate the three-dimensional pocket on the ankle wrap and insert the fully charged battery.
  3. Wear the Wrap: Position the ankle wrap around your foot and ankle. Use the adjustable straps to secure it comfortably.
Four-step visual guide on how to wear the FEETMOR Heated Ankle Wrap, demonstrating the strap placement.

Image: Visual guide demonstrating the four steps to correctly wear the ankle wrap.

Betjeningsvejledning

Tænd/sluk og temperaturkontrol

  • Tænd: Long press the power button on the controller for 3-5 seconds to turn the device on. The switch will light up red for 3 seconds to display the remaining battery power.
  • Juster temperatur: Each short press of the power button will cycle through the temperature settings:
    • Rødt lys: High level (70℃/158℉ to 85℃/185℉)
    • Grønt lys: Medium level (55℃/131℉ to 70℃/158℉)
    • Blåt lys: Low level (40℃/104℉ to 55℃/131℉)
  • Sluk: Long press the power button for 3-5 seconds to turn the device off.

Intelligent Temperature Control Protection

  • For safety, when the High (Red) temperature setting is selected, the device will automatically switch to the Medium (Green) setting after 5 minutes. To continue using the High setting, manually re-select it.
  • The battery indicator will flash when the battery level drops below 25%, signaling that recharging is needed.
Diagram showing the FEETMOR Heated Ankle Wrap's temperature settings (High, Medium, Low) and battery life indicators.

Image: Controller interface with temperature levels and battery status.

Opretholdelse

To ensure the longevity and proper function of your FEETMOR Heated Ankle Wrap, follow these guidelines:

  • Rensning: Disconnect the battery before cleaning. Refer to the product packaging or care label for specific cleaning instructions. Typically, spot cleaning with a damp cloth is recommended. Do not submerge the device in water.
  • Opbevaring: Store the ankle wrap in a cool, dry place when not in use. Ensure the battery is fully charged before long-term storage to maintain battery health.
  • Batteripleje: Use only the provided charger for the battery. Avoid exposing the battery to extreme temperatures or physical damage.

Fejlfinding

  • Enheden varmer ikke op: Ensure the battery is fully charged and correctly inserted into its pocket. Check that the power button has been pressed and held for 3-5 seconds to turn the device on.
  • Battery Indicator Flashing: A flashing battery indicator means the battery level is below 25% and requires recharging.
  • Inkonsekvent varme: Ensure the wrap is securely fitted to allow proper contact with the skin. If the issue persists, contact customer support.

Sikkerhedsoplysninger

Læs og overhold venligst følgende sikkerhedsforanstaltninger:

  • Do not use the heated ankle wrap while sleeping.
  • Opbevar enheden utilgængeligt for børn.
  • Do not use this product on individuals with diabetes, neuropathy, or impaired sensation who cannot detect heat levels or communicate discomfort.
  • Always use with a sock or thin fabric layer between the heating element and your skin, especially when using high heat settings, to prevent burns.
  • Consult a healthcare professional before use if you have any pre-existing medical conditions, particularly those affecting circulation or skin sensitivity.
  • Må ikke anvendes på åbne sår eller irriteret hud.
  • Do not use if the device or battery appears damaged.

Specifikationer

MærkenavnFEETMOR
Modelnavnheating ankle brace
Materiale TypePolyester
FarveSort
Antal indstillinger3 (Lav, Medium, Høj)
Batteritype1 Lithium Polymer batteri (medfølger)
Varens vægt1 gram
Pakkedimensioner11.42 x 6.77 x 1.65 tommer

Garanti og support

For warranty information, product support, or any inquiries regarding your FEETMOR Heated Ankle Wrap, please contact FEETMOR customer service directly. Contact details can typically be found on the product packaging or the official FEETMOR webwebsted.