1. Introduktion
The Technoline WS 8016 is a modern radio-controlled wall clock designed for clear readability and versatile display options. It automatically synchronizes with the DCF-77 radio signal for precise timekeeping. This manual provides detailed instructions for setting up and operating your clock.
Nøglefunktioner omfatter:
- Radio-controlled time (DCF-77) with manual setting option
- 12/24 hour time format display
- Tidszoneindstilling
- Date and weekday display in 7 languages
- Indoor temperature display in Celsius (°C) or Fahrenheit (°F)
- Indoor humidity display in percentage relative humidity (% RH)
- Two independent alarm settings
- Flexible placement: wall-mountable or tabletop stand
2. Vigtige sikkerhedsoplysninger
- Læs alle instruktioner omhyggeligt, før du bruger enheden.
- Opbevar enheden utilgængeligt for børn.
- Udsæt ikke uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- Use only the specified battery type (2 x AA Mignon LR06).
- Bortskaf brugte batterier korrekt i henhold til lokale regler.
- Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret personale for service.
3. Pakkens indhold
- Technoline WS 8016 Digital Radio-Controlled Wall Clock
- Instruktionsmanual (dette dokument)
Note: 2 x AA Mignon LR06 batteries are not included and must be purchased separately.
4. Produktet er slutview
Familiarize yourself with the clock's display and controls.
Figur 1: Main display of the Technoline WS 8016 clock. It clearly presents the current time (e.g., 10:30), the radio signal reception icon, two alarm indicators (1 M-F, 2 S-S), indoor temperature (e.g., 23.2°C), weekday (e.g., MONTAG), date (e.g., 29/JAN/2019), and indoor humidity (e.g., 76% RH).
Figur 2: Physical dimensions of the Technoline WS 8016 clock, measuring 22.5 cm in width and 14.3 cm in height.
Control Buttons (Typically located on the back or side):
- SÆT: Enters setting mode, confirms settings.
- UP / +: Increases values, cycles through options.
- DOWN / -: Decreases values, cycles through options.
- KØRSELSVEJLEDNING: Switches display modes, exits setting mode.
- ALARM: Accesses and sets alarm functions.
- 12/24: Skifter mellem 12-timers og 24-timers tidsformater.
- °C/°F: Skifter mellem temperaturenheder i Celsius og Fahrenheit.
5. Opsætning
5.1 Batteriinstallation
- Find batteridækslet på bagsiden af uret.
- Fjern dækslet.
- Insert 2 x AA Mignon LR06 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Sæt batterirummets dæksel på igen.
5.2 Automatic Time Synchronization (DCF-77)
After battery insertion, the clock will automatically begin searching for the DCF-77 radio signal. This process can take several minutes to an hour, depending on your location and environmental conditions.
- Place the clock near a window, away from electronic devices that may cause interference, for optimal signal reception.
- A radio tower icon on the display will flash during signal search and become solid when the signal is successfully received and synchronized.
- If the signal is not received within 10 minutes, try repositioning the clock and wait for the next automatic synchronization attempt (usually hourly or daily).
6. Betjeningsvejledning
6.1 Manuel tidsindstilling
If the radio signal is unavailable or you prefer to set the time manually:
- Tryk og hold på SÆT button for approximately 3 seconds to enter the manual setting mode. The first adjustable value will flash.
- Brug UP or NED knapper til at justere den blinkende værdi (f.eks. time, minut).
- Trykke SÆT briefly to confirm the current setting and move to the next adjustable parameter.
- Repeat steps 2 and 3 for all settings: hour, minute, 12/24h format, time zone, year, month, day, weekday language, and temperature unit.
- To exit setting mode, press the MODE button or wait for 15 seconds without pressing any button.
6.2 12/24 timers format
I normal tidsvisningstilstand skal du trykke på 12/24 -knappen for at skifte mellem 12-timers (med AM/PM-indikator) og 24-timers formater.
6.3 Tidszoneindstilling
During manual time setting (Section 6.1), you can adjust the time zone offset (e.g., +1, -1 hour) if your location is outside the standard DCF-77 signal's time zone.
6.4 Date and Weekday Language
During manual time setting (Section 6.1), you can select the display language for the weekday. Options typically include English, German, French, Spanish, Italian, Dutch, and Danish.
6.5 Temperaturenhed
I normal tidsvisningstilstand skal du trykke på ° C / ° F button to switch the indoor temperature display between Celsius and Fahrenheit.
6.6 Alarmindstillinger
The clock features two independent alarms: Alarm 1 (typically for Monday-Friday) and Alarm 2 (typically for Saturday-Sunday).
- Tryk på ALARM button repeatedly to cycle through Alarm 1, Alarm 2, and Alarm Off display modes.
- To set an alarm, select the desired alarm (Alarm 1 or Alarm 2) and then press and hold the ALARM button for approximately 3 seconds. The alarm hour will flash.
- Brug UP or NED knapperne for at justere alarmens time. Tryk på ALARM for at bekræfte og gå til indstillingen af alarmminutter.
- Brug UP or NED buttons to adjust the alarm minute. Press ALARM for at bekræfte og afslutte alarmindstillingstilstand.
- For at aktivere eller deaktivere en alarm skal du kort trykke på ALARM button when the alarm time is displayed. An alarm icon (e.g., a bell) will appear on the display when the alarm is active and disappear when it is deactivated.
7. Pleje og vedligeholdelse
Rensning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.
Udskiftning af batteri: Replace the batteries when the low battery indicator appears on the display. Always replace both batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.
8. Fejlfindingsvejledning
| Problem | Løsning |
|---|---|
| No time display / Incorrect time | Check battery installation and ensure batteries have sufficient charge. Ensure the clock is within range of the DCF-77 signal. If the signal is weak or unavailable, manually set the time as described in Section 6.1. |
| Radio signal icon not displayed or flashing continuously | Move the clock closer to a window or an open area. Avoid placing it near large metal objects or electronic devices (TVs, computers, microwaves) that may cause interference. Wait for the next automatic synchronization attempt. |
| Temperature/Humidity readings are inaccurate | Ensure the clock is not exposed to direct sunlight, drafts, or heat sources (e.g., radiators, appliances). Allow time for readings to stabilize after initial setup or relocation. |
| Alarmen lyder ikke | Verify that the alarm is activated (alarm icon displayed). Check that the alarm time is set correctly. Ensure batteries are not depleted. |
9. Tekniske specifikationer
- Model: WS8016
- Dimensioner (L x B x H): 22.5 x 3.81 x 14.3 cm (8.86 x 1.5 x 5.63 tommer)
- Vægt: 404 g (0.89 lbs)
- Materiale: Plast
- Strømforsyning: 2 x AA Mignon LR06 batteries (not included)
- Tidsformat: 12/24 timers valgbar
- Særlige funktioner: DCF-77 Radio Control, Indoor Temperature Display, Indoor Humidity Display, Calendar Display, 2 Alarm Settings
10. Garanti og kundesupport
This product comes with a standard manufacturer's warranty. Please refer to the warranty card or documentation included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or visit the official Technoline webside for yderligere information.