Mars Gaming ML-ONE120 Liquid CPU Cooler Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Mars Gaming ML-ONE120 Liquid CPU Cooler. Designed for optimal thermal performance, the ML-ONE120 features an Infinity Mirror with FRGB illumination, an OPTI-CHAMBER pump, a silent FDB fan, and broad compatibility with various CPU sockets. Please read this manual thoroughly before installation to ensure correct setup and safe operation.

2. Sikkerhedsoplysninger

• Always disconnect power from your computer before installing or servicing any components.
• Handle the cooler and its components with care to avoid damage.
• Do not open the pump or radiator; the liquid cooling system is sealed and requires no refilling.
• Keep the product away from direct sunlight, high temperatures, and high humidity.
• Ensure proper grounding of your system to prevent electrical hazards.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter installationen:

• ML-ONE120 Liquid CPU Cooler Unit (Pump, Radiator, and Tubes)
• 120mm FRGB Fan
• Universal Mounting Hardware Kit (for Intel and AMD sockets)
• Termopasta (påført på forhånd eller i tube)
• Brugermanual

4. Opsætning og installation

Follow these steps for proper installation of your ML-ONE120 liquid cooler. Refer to the included diagrams for visual guidance.

4.1 Prepare the CPU and Motherboard

1. Install the appropriate backplate for your CPU socket (Intel or AMD) onto the motherboard.
2. Secure the standoffs into the backplate.
3. Clean the CPU surface with isopropyl alcohol to remove any residue.
4. Apply a small amount of thermal paste to the center of the CPU if not pre-applied to the cold plate.

4.2 Mount the Pump/Cold Plate

Carefully align the pump/cold plate assembly with the CPU and the standoffs. Gently lower it into place, ensuring even contact.

Billede: Nærbillede view of the pump base, showing the copper cold plate and mounting points for universal compatibility.

Secure the pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: The pump's base, illustrating its wide compatibility with various Intel and AMD CPU sockets.

4.3 Installer radiator og ventilator

1. Attach the 120mm FRGB fan to the radiator using the shorter fan screws. Ensure the fan is oriented to push air through the radiator (typically towards the outside of the case for exhaust, or into the case for intake, depending on your case airflow).


Image: The radiator with the 120mm FRGB fan mounted, ready for installation into the PC case.

2. Mount the radiator assembly to an available 120mm fan mount in your PC case using the longer radiator screws. Common locations include the rear or top of the case. The 400mm Teflon tubes provide flexibility for placement.

4.4 Tilslut kabler

1. Connect the pump's 3-pin power connector to a CPU_FAN or AIO_PUMP header on your motherboard.
2. Connect the fan's 3-pin power connector to an available fan header on your motherboard.
3. Connect the FRGB lighting cable from the pump and fan to a compatible FRGB header on your motherboard or a dedicated FRGB controller. Note that the FRGB lighting is fixed and does not offer customizable color changes.

5. Betjeningsvejledning

Once installed, the Mars Gaming ML-ONE120 operates automatically. The pump and fan speeds are typically controlled by your motherboard's BIOS/UEFI settings based on CPU temperature. Ensure these settings are configured for optimal cooling performance and noise levels.

Image: The ML-ONE120 pump and fan displaying their fixed FRGB illumination, creating an infinite depth effect.

The FRGB illumination on the pump and fan provides a fixed rainbow effect. This lighting is not software-addressable for color changes or dynamic effects.

Image: The Mars Gaming ML-ONE120 liquid cooler, highlighting its capability to handle up to 200W TDP for maximum performance.

6. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre din væskekølers levetid og optimale ydeevne.

• Fjernelse af støv: Periodically clean the radiator fins and fan blades using compressed air. Ensure the fan is held stationary during cleaning to prevent damage to the bearings.
• Kabeltjek: Verify that all power and FRGB cables remain securely connected.
• Visuel inspektion: Occasionally inspect the tubes and connections for any signs of wear or leaks. While AIOs are sealed, a quick visual check is always recommended.

7. Fejlfinding

If you encounter issues with your ML-ONE120 cooler, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the official Mars Gaming webwebstedet eller kontakt din forhandler. Gem din købsbevis til garantikrav.