Sonew Smart WiFi Circuit Breaker 16A User Manual

Indledning

The Sonew Smart WiFi Circuit Breaker 16A is designed to provide intelligent control and monitoring of your home appliances. This device allows for remote operation, scheduling, and real-time energy consumption tracking, enhancing convenience and safety in your smart home environment.

Produktegenskaber

• Fjernovervågning og kontrol: Remotely monitor the operational status of your equipment and control its ON/OFF state through a mobile application.
• Smart Home Integration: Monitor the usage of all household appliances and control them remotely with intelligent scheduling.
• Tre tidsindstillinger: Includes timing mode, countdown mode, and cycle timing, allowing for flexible scheduling of appliance operation.
• Konstruktion af høj kvalitet: Features high-precision copper-manganese, PA66 flame-retardant material for high-temperature resistance, ensuring safety and durability.
• Sikkerhedsbeskyttelse: Equipped with colorful indicator lights for clear status indication. Supports short-circuit protection and overload protection.
• Energy Measurement Function: Real-time display of current, voltage, and power, with historical energy consumption data.

Image: Sonew Smart WiFi Circuit Breaker highlighting its programmed mode, countdown mode, cyclic programming, and energy measurement function.

Sikkerhedsoplysninger

Please read all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other serious injury.

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter.
• Ensure the main power supply is disconnected before any installation or maintenance.
• Betjen ikke enheden med våde hænder eller i damp forhold.
• Kontroller korrekte ledningsforbindelser for at forhindre skader på enheden eller tilsluttede apparater.
• Enheden er kun designet til indendørs brug.

Pakkens indhold

Pakken indeholder typisk:

• 1 x Sonew Smart WiFi Circuit Breaker 16A
• 1 x Brugermanual (dette dokument)

Specifikationer

Image: Product dimensions of the Sonew Smart WiFi Circuit Breaker.

Opsætning

1. Electrical Installation and Wiring

Before proceeding, ensure the main power supply is turned OFF at the circuit breaker panel to prevent electric shock.

1. Mount the Sonew Smart WiFi Circuit Breaker onto a standard DIN rail.
2. Connect the incoming power cable (Live and Neutral) to the upper terminals marked 'N' (Neutral) and 'L' (Live/Power).
3. Connect the outgoing load cable (to your appliance) to the lower terminals marked 'N' (Neutral) and 'L' (Load).
4. Sørg for, at alle forbindelser er sikre og korrekt isolerede.

Image: Details of the single-channel wiring port and positioning clip for installation.

2. App-parring og Wi-Fi-forbindelse

This device uses the Smart Life or Tuya Smart app for control.

1. Download the 'Smart Life' or 'Tuya Smart' app from your mobile device's app store (iOS or Android).
2. Registrer dig eller log ind på din konto i appen.
3. Sørg for, at din telefons Bluetooth og Wi-Fi er aktiveret.
4. Turn ON the main power supply to the circuit breaker. The LED indicator on the device should start flashing.
5. If the LED is not flashing, long-press the power button on the circuit breaker for approximately 5-10 seconds until the LED indicator slowly flashes blue. This indicates pairing mode.
6. In the app, a pop-up window might appear prompting you to add a new device. If not, tap the '+' icon in the upper right corner of the app, then select 'Add Device'. The app should automatically discover the circuit breaker.
7. Follow the on-screen prompts to confirm the device and enter your 2.4GHz Wi-Fi network password.
8. Wait for the device to connect to your Wi-Fi network. Once connected, the LED indicator will turn solid blue, and the device will appear in your app.

Image: Visual guide for app pairing and Wi-Fi connection steps.

Betjeningsvejledning

1. LED-indikatorstatus

• Solid blåt lys: Afbryderen er ON.
• Sluk lyset: The circuit breaker is OFF or in off-grid mode. (Note: In off-grid mode, the manual switch has no status indicator. Exercise caution during operation.)
• Slowly Flashing Blue Light: Produktet er i parringstilstand.

Image: Explanation of LED indicator light meanings.

2. Fjernbetjening

Once paired with the app, you can control the circuit breaker from anywhere with an internet connection:

• Åbn Smart Life/Tuya Smart-appen.
• Select your Sonew Smart WiFi Circuit Breaker from the device list.
• Tap the ON/OFF button to toggle the power supply to connected appliances.

3. Timing Modes

The app allows you to set various schedules for automated control:

• Timingstilstand: Set specific times for the circuit breaker to turn ON or OFF on selected days.
• Nedtællingstilstand: Set a countdown timer after which the circuit breaker will change its state (e.g., turn off after 2 hours).
• Cyklustiming: Program repetitive ON/OFF cycles within a specified period (e.g., turn on for 30 minutes, then off for 1 hour, repeating daily).

4. Energiovervågning

The circuit breaker provides real-time and historical energy consumption data:

• In the app, navigate to the device interface.
• View realtidsstrøm, voltage, og strømforbrug.
• Access historical data, typically displayed by year, month, day, or hour, to track energy usage patterns.

Image: Real-time energy consumption monitoring interface in the app.

Opretholdelse

The Sonew Smart WiFi Circuit Breaker requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Rensning: Tør enhedens yderside regelmæssigt af med en tør, blød klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Firmwareopdateringer: Check the Smart Life/Tuya Smart app regularly for any available firmware updates for your device. Updates can improve performance and add new features.
• Tilslutningskontrol: Occasionally verify that all electrical connections are secure and free from corrosion. Ensure the Wi-Fi signal remains strong for reliable operation.

Fejlfinding

If you encounter issues with your Sonew Smart WiFi Circuit Breaker, refer to the following common problems and solutions:

• Enheden opretter ikke forbindelse til Wi-Fi:
  • Sørg for, at dit Wi-Fi-netværk er 2.4 GHz. Enheden understøtter ikke 5 GHz Wi-Fi.
  • Tjek, at din Wi-Fi-adgangskode er korrekt.
  • Make sure the device is in pairing mode (slowly flashing blue LED). If not, long-press the power button to enter pairing mode.
  • Flyt enheden tættere på din Wi-Fi-router for at forbedre signalstyrken.
  • Genstart din Wi-Fi-router, og prøv at parre igen.
• Device Not Responding to App Commands:
  • Tjek din internetforbindelse på din mobilenhed.
  • Verify that the circuit breaker is connected to Wi-Fi (solid blue LED).
  • Genstart appen.
  • Hvis problemet fortsætter, kan du prøve at parre enheden med appen igen.
• Overload/Short-Circuit Protection Tripping:
  • Disconnect the connected appliance(s) and check for faults.
  • Ensure the total current drawn by connected devices does not exceed the circuit breaker's 16A rating.
  • Consult a qualified electrician if the issue persists after checking connected loads.

Garantioplysninger

Sonew products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or natural disasters.

Støtte

For further assistance, technical support, or warranty inquiries, please contact Sonew customer service through the retailer where the product was purchased or visit the official Sonew webwebsted for kontaktoplysninger.