Indledning
This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics Mesh Desk Chair, Model FG-50854M. Please read this manual thoroughly before use to ensure proper function and safety.
Figure 1: The Amazon Basics Mesh Desk Chair (Model FG-50854M) in a typical office environment. This chair features a black mesh backrest, a wide padded seat, and adjustable armrests, designed for comfort and support.
The Amazon Basics Mesh Desk Chair is designed for comfort and durability, featuring a breathable mesh backrest, a wide seat with thick, high-density foam cushioning, and integrated lumbar support. It is built to accommodate a high load capacity and offers various adjustments for personalized comfort.
Sikkerhedsoplysninger
ADVARSEL: To ensure safe use, do not exceed the maximum load capacity of 181.4 kg (400 pounds). Verify that the chair is properly assembled and adjusted before each use. Improper use may result in injury.
- Følg altid monteringsvejledningen nøje.
- Stå ikke på stolen.
- Brug ikke stolen, hvis nogen af delene er beskadigede eller mangler.
- Hold børn væk fra stolen under samling. Små dele kan være en kvælningsfare.
- Use the chair only on a level surface.
Komponenter og samling
Before assembly, ensure all components are present and undamaged. Refer to the diagram below for identification of key parts and adjustable features.
Figure 2: Chair Components and Adjustable Features. This image illustrates the main parts of the chair, including the mesh backrest, padded seat, armrests, pneumatic height adjustment lever, and 360-degree swivel base with caster wheels.
Monteringstrin
Assembly typically involves attaching the base to the pneumatic cylinder, then the seat and backrest. Specific tools may be included or required. Follow the detailed instructions provided in the packaging for your specific model.
- Pak alle komponenter ud, og verificer dem i forhold til komponentlisten.
- Insert the caster wheels into the base.
- Place the pneumatic cylinder into the center hole of the base.
- Fastgør sædemekanismen til undersiden af sædehynden.
- Mount the backrest to the seat mechanism.
- Place the assembled seat and backrest onto the pneumatic cylinder.
- Fastgør armlænene til sædet.
- Test alle justeringer for at sikre korrekt funktion.
Betjeningsvejledning
Højdejustering
To adjust the seat height (range: 47-55 cm):
- To raise the seat: Lift the height adjustment lever while taking your weight off the seat. Release the lever at the desired height.
- To lower the seat: Lift the height adjustment lever while seated. Release the lever at the desired height.
Justering af armlæn
The armrests are adjustable in height (range: 65-72 cm from the floor). Locate the adjustment buttons or levers on the armrests and press them to move the armrests up or down. Release to lock in place.
Justering af lændestøtte
The chair features an ergonomic design with adjustable lumbar support. Locate the knob on the back of the chair's backrest. Rotate the knob to increase or decrease the intensity of the lumbar support to suit your preference.
Drejning og mobilitet
The chair is equipped with a 360-degree swivel function and five caster wheels for easy mobility. Ensure the wheels are clean and free of debris for smooth movement.
Opretholdelse
- Rensning: Tør stolen af med en blød, damp cloth. For mesh and fabric parts, use a mild soap solution if necessary, then wipe with a clean, damp klud og lad lufttørre. Undgå skrappe kemikalier.
- Inspektion: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Efterspænd om nødvendigt.
- Hjul: Keep caster wheels free of hair and debris to ensure smooth rolling.
- Opbevaring: Opbevar stolen et tørt sted, væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stolen kan ikke justeres i højden. | Pneumatic cylinder malfunction or lever not engaged. | Ensure the lever is fully engaged. If the issue persists, the pneumatic cylinder may need replacement. |
| Stolen er vaklende eller ustabil. | Løse skruer eller forkert montering. | Check and tighten all screws and bolts. Re-verify assembly steps. |
| Hjulene ruller ikke jævnt. | Affald sidder fast i hjul eller beskadigede styrehjul. | Clean any debris from the wheels. Replace damaged casters if necessary. |
| Knirkende lyde. | Løse forbindelser eller friktion mellem dele. | Tighten all connections. Apply a small amount of silicone lubricant to moving parts if needed. |
Specifikationer
Figure 3: Chair Dimensions. This diagram provides detailed measurements for the chair's width, depth, and height, including seat dimensions, backrest height, and armrest height.
| Feature | Detalje |
|---|---|
| Mærke | Grundlæggende om Amazon |
| Modelnummer | FG-50854M |
| Farve | Sort |
| Materiale | Plastic, Metal, Mesh Fabric, High-Density Foam |
| Overordnede mål (B x D x H) | Approx. 77.5 cm x 75 cm x 106 cm (Max Height) |
| Sædemål (B x D) | 58 cm x 56 cm |
| Justeringsområde for sædehøjde | 47 cm - 55 cm |
| Armrest Height Adjustment Range (from floor) | 65 cm - 72 cm |
| Ryglænets højde | 69 cm (from seat) |
| Belastningskapacitet | 181.4 kg (400 lbs) |
| Produktets vægt | 18.82 kg |
| Funktioner | Mesh back, wide padded seat, adjustable lumbar support, adjustable armrests, 360-degree swivel, 5-point caster base. |
Figure 4: Seat Cushion Construction. This diagram illustrates the four layers of the seat cushion: fabric, top foam, low-rebound main foam, and plywood base, highlighting the 8cm thick high-density foam for comfort.
Garanti og support
Dette Amazon Basics-produkt er dækket af en 1-year domestic warranty in Japan from the date of purchase, provided by Amazon LLC. For warranty claims, technical support, or any inquiries regarding your product, please contact Amazon customer service through your purchase history on Amazon.co.jp.
Please have your purchase details and model number (FG-50854M) ready when contacting support.