Indledning
The Lifepro Lumicure Pro is a portable light therapy device designed for targeted application. It utilizes a combination of red, blue, and near-infrared (NIR) light wavelengths to support various wellness applications. This manual provides essential information for the safe and effective use of your device.
Sikkerhedsoplysninger
WARNING: Always read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.
- Øjenbeskyttelse: Do not look directly into the light source. Always wear the provided protective eyewear during use to prevent potential eye strain or damage.
- Medicinske tilstande: Rådfør dig med en sundhedsperson før brug, hvis du har medicinske tilstande, er gravid eller tager medicin, der kan øge lysfølsomheden.
- Hudfølsomhed: Perform a patch test on a small area of skin before full use to check for any adverse reactions. Discontinue use if irritation occurs.
- Børn og kæledyr: Hold enheden utilgængeligt for børn og kæledyr.
- Vandeksponering: This device is not water-resistant. Avoid contact with water or other liquids.
- Varme: The device may become warm during extended use. Avoid prolonged contact with a single skin area to prevent discomfort.
- Beskadiget enhed: Do not use the device if it appears damaged or is not functioning correctly. Contact customer support for assistance.
Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- Lifepro Lumicure Pro Light Therapy Torch
- Transporttaske
- Fakkelpose
- Genopladeligt batteri (ikke-standard batteri)
- Ladekabel
- Beskyttelsesbriller
- Brugervejledning (dette dokument)

Produkt overview
The Lifepro Lumicure Pro is a compact, handheld light therapy device featuring a dual LED design. It offers multiple light options to suit various needs.
Nøglefunktioner:
- Dobbelt LED-design: Combines red and near-infrared light in a compact device.
- Flere lysmuligheder: Includes red (660nm), blue (420nm), and near-infrared (900nm) modes with a pulse setting.
- Focused LED Output: Provides steady light using key wavelengths for targeted application.
- Nem at bruge: Simple, handheld design for convenient everyday use.
- Bærbar størrelse: Lightweight and easy to carry, making it suitable for travel.

Opsætning
1. Batteriinstallation
- Unscrew the tail cap of the Lumicure Pro device.
- Insert the provided rechargeable battery with the positive (+) end facing towards the light head.
- Securely screw the tail cap back onto the device.

2. Oprindelig opkrævning
Before first use, fully charge the device using the provided charging cable. Connect the cable to the device and a suitable USB power source. The indicator light will show charging status (refer to device for specific indicator behavior).
Betjeningsvejledning
1. Tænd/sluk
Press and hold the power button located on the side of the device for approximately 2 seconds to turn the device on or off.
2. Valg af tilstand
Once powered on, short press the power button to cycle through the available light modes:
- Red Light Mode (660nm): Visible red light.
- Blue Light Mode (420nm): Visible blue light.
- Near-Infrared (NIR) Mode (900nm): Invisible light, often combined with red light.
- Pulstilstand: Cycles through the light modes with a pulsing effect.
3. Ansøgning
Ensure you are wearing the provided protective eyewear before beginning treatment.
- Hold the device approximately 1-3 inches (2.5-7.5 cm) from the skin surface of the target area.
- Apply the light for 3-5 minutes per area. Do not exceed 10 minutes per area per session.
- Move the device slowly over the area or hold it stationary, depending on your preference and the area being treated.
- Use 1-3 times per day, with at least 4 hours between sessions on the same area.



Opretholdelse
Rensning
Tør enheden af med en blød, damp klud efter hver brug. Brug ikke slibende rengøringsmidler, og nedsænk ikke enheden i vand.
Opbevaring
Store the device in its transport bag or pouch in a cool, dry place away from direct sunlight and extreme temperatures.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tændes ikke. | Battery is not inserted correctly or is depleted. | Ensure battery is inserted with correct polarity. Charge the battery fully. |
| Some lights are not working or flicker. | Internal electronic fault or low battery. | Sørg for, at batteriet er fuldt opladet. Kontakt kundesupport, hvis problemet fortsætter. |
| Enheden bliver for varm. | Prolonged use on one area. | Reduce session duration or move the device more frequently. Allow the device to cool down between uses. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | LP-LMCRP |
| Dimensioner | 124D x 25W x 20H millimeters (approx. 12.4 x 2.54 x 1 cm) |
| Varens vægt | 0.3 pund (ca. 136 gram) |
| Strømkilde | Batteridrevet |
| Batteritype | Lithium Ion (1 Nonstandard Battery required) |
| Batterilevetid | 6 Hours (approximate) |
| Runtime | 10 Hours (approximate) |
| Voltage | 3.7 volt |
| Wattage | 5 watt |
| Lyskildetype | LED |
| Antal lyskilder | 2 (LED arrays) |
| bølgelængder | 420nm (Blue), 660nm (Red), 900nm (Near-Infrared) |
| Materiale | Iron (Anodized Finish) |
| Oprindelsesland | Kina |
Garanti og support
The Lifepro Lumicure Pro Red Light Therapy Device comes with a Lifetime Support warranty. For any questions, concerns, or warranty claims, please contact Lifepro customer support. Refer to the product packaging or the official Lifepro webhjemmeside for de seneste kontaktoplysninger.