Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight

1. Sikkerhedsoplysninger

Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Risiko for brand: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
• Risiko for elektrisk stød: Installation af LED Retrofit Kit kræver kendskab til armaturets elektriske systemer. Hvis du ikke er kvalificeret, skal du ikke forsøge at installere. Kontakt en kvalificeret elektriker.
• Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
• To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Denne lamp is not intended for use with emergency exit luminaires or emergency lights.
• Før du forsøger at installere, skal du kontrollere din lokale elektriske kode, da den sætter ledningsstandarder for dit område.
• The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
• Do not leave bare wires or exposed outside the wire nut connectors.
• Du må ikke lave eller ændre åbne huller i et kabinet af ledninger eller elektriske komponenter under installationen af ​​sættet.
• This product is ETL Listed and operates at 120VAC.

2. Produktet er slutview

The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.

• Energieffektiv: 9W LED, equivalent to 40W, consuming less power.
• Lysstyrke: 550 Lumens with anti-glare lighting and a 36° beam spread.
• Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
• Dæmpbar: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
• Høj CRI: 90 CRI rating for accurate color appearance.
• Holdbar konstruktion: Features a durable cast aluminum body and deep recessed trim.
• Damp Vurderet: Velegnet til brug i damp locations such as bathrooms and kitchens.

Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black

3. Reservedelsliste

Sørg for, at alle komponenter er til stede, før installationen påbegyndes:

• LED Downlight with spring clips
• Junction Box (with integrated CCT selection switch)
• Connector cable (pre-attached to downlight and junction box)
• Skumpakning

Figur 3.1: Side view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.

4. Opsætning og installation

This downlight is designed for easy installation without the need for a traditional recessed can or housing.

1. Forbered åbningen: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
2. Tilslut ledninger: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
3. Vælg farvetemperatur: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
4. Position Junction Box: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
5. Tilslut downlight: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
6. Installer downlight: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.

Figur 4.1: Produktmål til installationsplanlægning.

Figure 4.2: CCT selection switch inside the junction box.

5. Betjeningsvejledning

Once installed, operating your Maxxima LED downlight is straightforward.

5.1. Valg af farvetemperatur

The desired color temperature (CCT) must be selected using the switch inside the junction box før installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.

Figure 5.1: Visual comparison of selectable color temperatures.

5.2. Dæmpning

This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.

Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.

6. Vedligeholdelse

The Maxxima LED downlight requires minimal maintenance.

• Rensning: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Ingen dele, der kan serviceres af brugeren: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.

7. Fejlfinding

If you encounter issues with your downlight, refer to the following common problems and solutions:

8. Specifikationer

9. Garanti og support

This Maxxima LED downlight is covered by a 3 års garanti fra købsdatoen.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webhjemmeside for aktuelle kontaktoplysninger.

Gem venligst din købsbevis af garantihensyn.