Vigtige sikkerhedsoplysninger
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Sørg for, at strømforsyningen er afbrudt før installation, vedligeholdelse eller udskiftning af pære.
- Installationen bør udføres af en kvalificeret elektriker, hvis du er usikker på den elektriske ledningsføring.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Overskrid ikke det maksimale wattage specificeret for pæren.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Mounting material (screws, wall plugs)
- Instruktionsmanual
Note: The E27 bulb is not included and must be purchased separately.
Opsætning og installation
- Forbered installationsområdet: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Markér borepunkter: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Bore huller: Bor huller på de markerede steder. Sæt de medfølgende rawlplugs i de borede huller.
- Tilslut ledninger: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Monter armaturet: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Installer pæren: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Billede: Forside view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Betjeningsvejledning
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Billede: Detaljeret view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- TID: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Detektionsområde:
- Detektionsvinkel: 120°
- Registreringsområde: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Optimal monteringshøjde: 1.8 meters for best performance.
Opretholdelse
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Tør af med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Udskiftning af pære: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Inspektion: Undersøg regelmæssigt armaturet for tegn på skader, løse forbindelser eller slid.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. Defekt pære. Incorrect LUX setting. | Tjek afbryderen. Udskift pære. Adjust LUX dial towards the moon icon for darker conditions. |
| Lyset forbliver tændt konstant. | Konstant bevægelse registreret. Incorrect TIME setting. | Ensure no objects are constantly moving in the detection zone. Juster TIME-drejeknappen til en kortere varighed. |
| Bevægelsessensor registrerer ikke. | Blokering i detektionsstien. Incorrect LUX setting. Sensor dirty. | Fjern eventuelle forhindringer. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Produktspecifikationer
- Mærke: Strålende
- Modelnummer: 1000134854
- ASIN: B0B11KYHSW
- Dimensioner (L x B x H): 17 x 7.6 x 40 cm
- Vægt: 490 gram
- Materiale: Rustfrit stål
- Skyggemateriale: Plast
- Farve: Sort
- Pære type: E27 (pære ikke inkluderet)
- Max Wattage: 20W (LED compatible)
- Antal løg: 1
- Strømkilde: El-kabel
- Installationstype: Vægmontering
- Speciel funktion: Bevægelsesdetektor
- IP-vurdering: IP44 (Beskyttelse mod stænkvand)
- Bevægelsesdetektorens vinkel: 120°
- Bevægelsesdetektorens rækkevidde: Up to 8m (both sides), max 10m
- Optimal monteringshøjde: 1.8m
Garanti og support
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant webwebstedet for detaljerede garantioplysninger og supportkontakter.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.