EGLO G9 LED Pin Bulb (Model 110152) Instruction Manual

Indledning

This manual provides essential information for the safe and efficient use of your EGLO G9 LED Pin Bulbs. Please read these instructions carefully before installation and retain them for future reference. These LED bulbs are designed to replace traditional 20W halogen bulbs, offering energy efficiency and a warm white light.

Sikkerhedsoplysninger

• Always switch off the power supply before installing, removing, or cleaning the bulb.
• Ensure the bulb is cool before handling to prevent burns.
• Do not use in fully enclosed luminaires without adequate ventilation, as this may shorten bulb lifespan.
• Denne pære er kun beregnet til indendørs brug.
• Pæren må ikke skilles ad eller ændres.
• Bortskaf brugte pærer i henhold til lokale regler.

Pakkens indhold

• 2 x EGLO G9 LED Pin Bulbs (Model 110152)

Opsætning

1. Sluk for strømmen: Before attempting any installation, ensure the power supply to the light fixture is completely switched off at the main circuit breaker.
2. Fjern gammel pære: Carefully remove the existing G9 halogen bulb from the fixture. Allow it to cool if it has been recently in use.
3. Isæt ny LED-pære: Align the two pins of the EGLO G9 LED bulb with the corresponding holes in the G9 socket. Gently push the bulb straight into the socket until it is securely seated. Do not force the bulb.
4. Gendan strøm: Once the bulb is securely installed, restore power to the light fixture at the main circuit breaker.
5. Prøve: Tænd lyskontakten for at kontrollere, at den fungerer korrekt.

Betjeningsvejledning

• Tænd/sluk: Operate the bulb using your standard light switch. The LED bulb will illuminate instantly without any warm-up time.
• Dæmpbar funktion: This EGLO G9 LED bulb is dimmable. If your light fixture is connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is suitable for LED bulbs to avoid flickering or damage.
• Lys kvalitet: The bulb emits a warm white light at 3000 Kelvin, ideal for creating a comfortable and relaxing ambiance in living rooms and bedrooms.

Opretholdelse

• Rensning: Sørg for, at strømmen er slukket, og at pæren er kold, inden rengøring. Tør pæren forsigtigt af med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.
• Udskiftning: With a lifespan of 15,000 hours, frequent replacement is not expected. When replacement is necessary, follow the 'Setup' instructions in reverse order to remove the old bulb and install a new one.

Fejlfinding

• Pæren lyser ikke:
  • Kontroller om strømforsyningen til armaturet er tændt.
  • Sørg for, at pæren sidder korrekt i fatningen.
  • Test the bulb in another working fixture, if possible, to rule out a faulty bulb.
• Flimrende:
  • If using a dimmer, ensure it is compatible with LED bulbs. Incompatible dimmers can cause flickering or damage.
  • Kontroller for løse forbindelser i armaturet eller ledningerne.
• Dæmpet lysudgang:
  • Verify that the dimmer (if used) is set to maximum brightness.
  • Ensure the bulb's specifications match your lighting needs.

Specifikationer

Garantioplysninger

EGLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official EGLO webwebsted. Gem venligst din købsbevis i tilfælde af garantikrav.

Supportinformation

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact EGLO customer support. Contact details can typically be found on the product packaging or the official EGLO webwebsted (www.eglo.com).