Beghelli 86152 Floodlight FL Outdoor Projector User Manual

1. Introduktion

Thank you for choosing the Beghelli 86152 Floodlight FL Outdoor Projector. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and retain them for future reference.

Image 1: Beghelli 86152 Floodlight FL Outdoor Projector. This image shows the front view of the white LED floodlight with its integrated mounting bracket.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• Elektrisk installation: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
• Strømafbrydelse: Ensure the main power supply is disconnected before any installation, maintenance, or cleaning.
• Voltage: This product operates on 220-240 VAC, 50/60 Hz. Verify your power supply matches these requirements.
• Jording: Projektøren skal være korrekt jordforbundet for at forhindre elektrisk stød.
• Udendørs brug: The product is rated IP66 for outdoor use, providing protection against dust and powerful water jets. However, do not submerge the unit.
• Temperatur: Do not operate the floodlight outside the specified ambient temperature range of -20°C to +40°C.
• Lyskilde: Se ikke direkte ind i LED-lyskilden, når den er tændt, da det kan forårsage øjenskader.
• Ændringer: Do not attempt to modify or repair the floodlight. Refer all servicing to qualified personnel.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• Beghelli 86152 Floodlight FL Outdoor Projector (1 unit)
• Mounting Bracket (pre-attached)
• Instruktionsmanual (dette dokument)
• Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the installation surface.

4. Opsætning og installation

Follow these steps for proper installation of your Beghelli Floodlight FL:

1. Vælg placering: Select a suitable outdoor location for mounting. The floodlight can be installed on a wall or ground. Ensure the surface is sturdy enough to support the weight of the fixture (approximately 1 kg).
2. Strømafbrydelse: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker.
3. Montering:
   • Use the pre-attached mounting bracket as a template to mark drilling points on the desired surface.
   • Drill appropriate holes and insert suitable anchors (if required for your surface type).
   • Secure the mounting bracket firmly to the surface using appropriate screws.
   • Adjust the angle of the floodlight as needed using the bracket's pivot points, then tighten securely.
4. Elektrisk tilslutning:
   • Route the electrical cable to the floodlight's connection point. Ensure the cable is suitable for outdoor use and protected from damage.
   • Connect the live (brown/black), neutral (blue), and earth (green/yellow) wires from your power supply to the corresponding terminals on the floodlight. Ensure all connections are secure and properly insulated.
   • Verify all wiring is correct and secure before proceeding.
5. Endelig kontrol: Double-check all connections and mounting security. Ensure no wires are exposed or pinched.

Image 2: Beghelli 86152 Floodlight FL Side View. This image provides a side perspective of the floodlight, highlighting its slim profile and the adjustable mounting bracket.

5. Betjeningsvejledning

Once installed correctly, operating the Beghelli Floodlight FL is straightforward:

1. Gendan strøm: After ensuring all installation steps are complete and safe, restore power to the circuit at the main breaker.
2. Tænd: Use the external wall switch or control system connected to the floodlight to turn it on. The LED light will illuminate instantly.
3. Slukke: Turn off the floodlight using the same external switch or control system.

This floodlight is designed for direct connection to a power source and does not feature integrated user controls like dimmers or color temperature adjustments.

6. Vedligeholdelse

The Beghelli Floodlight FL is designed for minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• Rensning: Periodically clean the floodlight's surface and glass cover with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or seals. Ensure power is disconnected before cleaning.
• Inspektion: Regularly inspect the floodlight for any signs of damage, loose connections, or wear on the cable. Address any issues promptly.
• Ingen dele, der kan serviceres af brugeren: The LED light source is integrated and not user-replaceable. Do not attempt to open the fixture, as this will void the warranty and may compromise its IP66 rating.

7. Fejlfinding

Hvis du støder på problemer med din projektør, kan du se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, please contact Beghelli customer support or a qualified electrician.

8. Tekniske specifikationer

9. Garanti og support

Beghelli products are manufactured to high-quality standards and are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Beghelli webhjemmeside for detaljerede garantivilkår.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or Beghelli customer service directly. Ensure you have your product model number (86152 Floodlight FL or 60047) and proof of purchase available when contacting support.

Beghelli Official Webwebsted: www.beghelli.it