1. Produktet er slutview
This product is a replacement drain pump and motor assembly designed for use in various washing machine and washer/dryer models. It is a critical component responsible for removing water from the appliance tub during the drain cycle.
This image displays the complete drain pump and motor assembly. It features a light grey plastic housing with a ribbed hose connection on the left, a black motor unit extending downwards, and electrical connection points on the right side of the housing.
2. Sikkerhedsoplysninger
Prioritér altid sikkerhed, når du arbejder med elektriske apparater. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Afbryd strømmen: Before attempting any repair or installation, always unplug the appliance from the power outlet or turn off the circuit breaker to prevent electric shock.
- Afløbsvand: Ensure all water is drained from the washer tub before beginning work.
- Brug beskyttelsesudstyr: Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse.
- Professionel assistance: Hvis du er usikker på et trin eller er utilpas under reparationen, skal du kontakte en kvalificeret tekniker.
- Håndteres med forsigtighed: Komponenter kan have skarpe kanter eller klemmepunkter.
3. Kompatibilitet
This drain pump and motor replacement part is compatible with a wide range of washer and washer/dryer models from various brands. Please verify your appliance's model number against the list below to ensure compatibility. You can typically find your model number on a label inside the washer door, on the back, or near the control panel.
Kompatible modeller inkluderer:
- Admiral: ATW4516HW0
- Amana: NTW4516FW2, NTW4516FW3, NTW4605EW1, NTW4665GW0
- Crosley: CAW35114GW0, CAW35114GW1, CAW38125HW0, CAW42114GW0, CAW42114GW1, CAW9352EW2
- Inglis: ITW4671EW1
- Kenmore: 110.20222511, 110.20232710, 110.20232711, 110.20242511, 110.20362810, 110.20362811, 110.20362812, 110.22242510, 110.22242511, 110.22332511, 110.22342512, 110.22442512, 110.22532511, 110.22532512, 110.25122810, 110.25122811, 110.5142511, 110.5142512, XNUMX
- majtag: 7MMVWC416FW0, 7MMVWC417FW0, 7MMVWC465JW0, MVWC415EW2, MVWC416FW0, MVWC416FW1, MVWC465HW0, MVWC465HW1, MVWC465HW2
- Roper: RTW4516FW1, RTW4516FW2
- Spabad: 1CWTW4705GW0, 7MWET4027HW0, 7MWGT4027HW0, 7MWTW4915EW1, WET4027HW0, WETLV27HW0, WETLV27HW1, WGT4027HW0, WGTLV27HW0, WGTLV27HW1, WTW4616FW1, WTW4616FW2, WTW4655JW0, WTW4715EW2, WTW4810EW2, WTW4816FW1, WTW4816FW2, WTW4850HW0, WTW4850HW1, WTW4855HW0, WTW4855HW1, WTW4915EW2, WTW4950HW0, WTW4950HW1, WTW4955HW0, WTW4955HW1, YWET4027HW0
Note: This is an aftermarket replacement part. If your specific model is not listed, please contact the seller for compatibility verification.
4. Installationsvejledning
Replacing a drain pump requires basic mechanical skills. The exact steps may vary slightly depending on your specific washer model. Always refer to your appliance's service manual for detailed, model-specific instructions. The following are general steps:
- Klargør apparatet:
- Unplug the washer from the electrical outlet.
- Sluk for vandtilførslen til vaskemaskinen.
- Disconnect the water inlet hoses from the back of the washer.
- Move the washer away from the wall to access the rear.
- Place towels or a shallow pan under the drain hose to catch any residual water.
- Adgang til afløbspumpen:
- Depending on your model, you may need to tilt the washer back, remove the front panel, or remove the back panel to access the drain pump.
- Locate the drain pump, typically at the bottom front or rear of the washer.
- Disconnect the Old Pump:
- Use pliers to release the clamps holding the hoses to the pump. Carefully remove the hoses. Be prepared for some water to spill.
- Disconnect the electrical wiring harness from the pump motor. Note the orientation of the wires if not clearly marked.
- Skru eller klips pumpen af dens monteringsbeslag.
- Install the New Pump:
- Mount the new drain pump onto the bracket, securing it with screws or clips.
- Connect the electrical wiring harness to the new pump motor.
- Attach the hoses to the new pump, securing them with the clamps. Sørg for en tæt forsegling for at forhindre lækager.
- Saml og test igen:
- Reattach any panels removed during access.
- Reconnect the water inlet hoses and turn on the water supply.
- Plug the washer back into the electrical outlet.
- Run a short drain or rinse/spin cycle to check for proper operation and leaks.
5. Betjeningsvejledning
As a replacement component, this drain pump and motor does not have separate operating instructions. Its function is integrated into the overall operation of your washing machine. Please refer to the original user manual for your specific washing machine model for detailed operating instructions.
Once installed correctly, the drain pump will activate automatically during the drain and spin cycles of your washer, ensuring efficient water removal.
6. Vedligeholdelse
Proper maintenance can extend the life of your drain pump and prevent future issues. While the pump itself requires minimal maintenance, regular care of your washing machine can indirectly benefit the pump's performance.
- Tjek for forhindringer: Periodically inspect the drain pump filter (if accessible on your model) and the drain hose for lint, coins, or other small items that can clog the pump and impede drainage. Refer to your washer's manual for filter cleaning instructions.
- Undgå overbelastning: Overloading the washer can put undue stress on all components, including the drain pump. Follow your washer's capacity guidelines.
- Use Proper Detergent: Use only high-efficiency (HE) detergent in HE washers to prevent excessive suds that can interfere with draining.
- Regelmæssig rengøring: Run a washer cleaning cycle or a hot water wash with vinegar/baking soda periodically to remove detergent residue and mineral buildup that could affect drainage.
7. Fejlfinding
If your washer is experiencing drainage issues after installing the new pump, consider the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Washer not draining | Clogged drain hose or pump filter | Inspect and clear any obstructions from the drain hose and pump filter. |
| Washer making unusual noises during drain cycle | Small objects caught in the pump impeller | Disconnect power, access the pump, and check for foreign objects. |
| Vandlækage fra pumpeområdet | Løs slange clamps or damaged hoses | Sørg for, at alle slanger klamps are tight and hoses are not cracked or damaged. Replace hoses if necessary. |
| Pump runs but no water drains | Air lock in the drain system or faulty pressure switch | Ensure drain hose is not pushed too far down the standpipe. Consult appliance service manual for pressure switch diagnostics. |
If troubleshooting steps do not resolve the issue, it is recommended to consult a professional appliance technician.
8. Specifikationer
| Attribut | Detalje |
|---|---|
| Mærkenavn | Generisk |
| Varenummer | 7MMVWC416FW0 |
| ASIN | B09Y8XMH61 |
| Fabrikant | Generisk |
| UPC | 824252672217 |
| Dato først tilgængelig | 19. april 2022 |
9. Garanti og support
This aftermarket replacement part comes with a money-back guarantee within 90 days from the date of purchase. The manufacturer is confident in the quality of this part.
For any questions regarding compatibility, installation, or product performance, please contact the seller or manufacturer directly. Provide your appliance's full model number and a detailed description of your inquiry for the most efficient support.
Kontaktoplysninger: Refer to your purchase documentation or the seller's contact details on the platform where the product was acquired.
