1. Introduktion
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your BooiParts S26113-E503-V50 NPS-400AB B 470W Server Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. Sikkerhedsoplysninger
Advarsel: Electrical shock hazard. Always disconnect power before installation or servicing.
- Ensure the power supply is compatible with your server system's requirements.
- Do not open the power supply unit. There are no user-serviceable parts inside.
- Install the unit in a well-ventilated area to prevent overheating.
- Use only approved power cables and connectors.
- Grounding is essential for safe operation.
3. Pakkens indhold
- BooiParts S26113-E503-V50 NPS-400AB B 470W Server Power Supply Unit
- Brugervejledning (dette dokument)
4. Opsætning og installation
Follow these steps to properly install your server power supply:
- Forberedelse: Power off your server and disconnect all power cables from the wall outlet. Open the server chassis according to the server manufacturer's instructions.
- Fjern den gamle strømforsyning (hvis relevant): Disconnect all cables from the existing power supply. Unscrew and remove the old unit from the server chassis.
- Installer ny strømforsyning: Carefully insert the BooiParts S26113-E503-V50 NPS-400AB B power supply into the designated bay within the server chassis. Secure it with screws.
- Tilslut kabler: Connect the power supply cables to the appropriate components on your motherboard, graphics cards, and storage devices. Ensure all connections are firm and correctly oriented. Refer to your server's motherboard manual for specific connector locations.
- Luk chassis: Once all connections are made and verified, close the server chassis.
- Tilslut ekstern strøm: Connect the server's power cable to the power supply and then to a grounded electrical outlet.

This image shows the BooiParts S26113-E503-V50 NPS-400AB B 470W Server Power Supply. It is a rectangular, grey metal unit with a cooling fan grille on one side and a bundle of multi-colored power cables extending from the other side. Various connectors are visible on the ends of the cables.
5. Betjeningsvejledning
After successful installation, you can power on your server.
- Press the power button on your server.
- Observe the system's boot process. The power supply fan should operate, and the system should initiate startup.
- Ensure stable operation. If any issues arise, refer to the Troubleshooting section.
6. Vedligeholdelse
Korrekt vedligeholdelse sikrer din strømforsynings levetid og pålidelighed.
- Rensning: Periodically, with the server powered off and unplugged, use compressed air to gently clean dust from the power supply's fan and vents. Do not use liquid cleaners.
- Ventilation: Ensure the server chassis and the power supply's vents are not obstructed to allow for proper airflow and cooling.
- Miljøforhold: Operate the power supply within recommended temperature and humidity ranges as specified by your server manufacturer.
7. Fejlfinding
If you encounter issues, perform the following basic troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Server does not power on. | No power to the unit, faulty power cable, incorrect connections. | Check power cable connection to wall and PSU. Verify all internal power connections. Test with a different power cable. |
| System powers on but is unstable or shuts down. | Ikke nok hvadtage, overheating, faulty component. | Ensure 470W is sufficient for your system. Check for proper ventilation. Verify all connections are secure. |
| Ventilatoren drejer ikke eller larmer for meget. | Dust accumulation, fan malfunction. | Clean fan and vents with compressed air (server off and unplugged). If issue persists, contact support. |
If these steps do not resolve the issue, consult a qualified technician or contact BooiParts support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | S26113-E503-V50 NPS-400AB B |
| Mærke | BooiParts |
| Output Wattage | 470 watt |
| Kompatible enheder | Server |
| Afkølingsmetode | Luft |
9. Garanti og support
For warranty information and technical support, please refer to the official BooiParts webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.