BONTEC OOXM3308 Adjustable Tilting Ceiling TV Mount User Manual

1. Introduktion

Thank you for choosing the BONTEC OOXM3308 Adjustable Tilting Ceiling TV Mount. This product is designed to securely hold most 26-55 inch televisions, offering versatile viewing angles and space-saving installation. Please read this manual thoroughly before installation to ensure safe and correct assembly and operation. Keep this manual for future reference.

Image 1.1: The BONTEC OOXM3308 Ceiling TV Mount with a television attached.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. Improper installation can lead to serious injury.

• Start ikke installationen, før du har læst og forstået alle instruktioner og advarsler i denne manual.
• Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og fjernsynet.
• Brug kun det medfølgende hardware. Brug ikke beskadigede dele.
• Dette produkt er kun beregnet til indendørs brug.
• Overskrid ikke den maksimale vægtkapacitet på 45 kg (99 lbs).
• Ensure VESA patterns are compatible (75x75mm to 400x400mm).
• Always use a qualified technician for installation if you are unsure about the process.
• Do not use concrete anchors on wood studs. Do not mount on drywall alone.

3. Pakkens indhold

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact BONTEC customer support.

Billede 3.1: Overview of height adjustment and included fitting hardware.

Fitting Hardware Included:

• Concrete Anchors (x6)
• Lag Bolts (x6)
• Washers (φ8mm) (x6)
• Skruenøgle (x1)

TV Mounting Screws:

• M4*30mm skruer
• M6*16mm skruer
• M8*16mm skruer
• M4/M6/M8 Square Washers
• M6*30mm skruer
• M8*50mm skruer
• D8*5mm Spacers
• D8*10mm Spacers

4. Produktfunktioner

The BONTEC OOXM3308 mount offers several features for optimal TV placement and viewoplevelse.

Image 4.1: Multiple features including forward tilt and swivel adjustment.

• Universal kompatibilitet: Designed for most 26-55 inch televisions.
• Robust konstruktion: Made from strong alloy steel, supporting up to 45 kg (99 lbs).
• VESA-overholdelse: Understøtter VESA-mønstre fra 75x75 mm til 400x400 mm.
• Adjustable Swivel: Features a ±90° swivel adjustment for flexible viewing vinkler.
• Vippemekanisme: The TV plate can be tilted downwards by 25° to reduce glare and optimize viewing.
• Integrated Height Adjustment: The mount offers an adjustable height range from 580mm to 840mm. Adjustments can be made using manual screws and the provided wrench.
• Secure Ceiling Attachment: Six locating holes ensure the mount is securely fastened to the ceiling.

Image 4.2: Illustration of the strong steel central column and secure locating holes.

Image 4.3: VESA compatibility and screen size range (26-55 inches).

Image 4.4: Low-profile tilting design with maximum capacity and VESA specifications.

5. Opsætning og installation

Follow these steps carefully for safe and secure installation.

5.1 Kontrol før installation

• TV vægt: Ensure your TV weighs no more than 45 kg (99 lbs).
• VESA mønster: Check the VESA mounting holes on the back of your TV. They must be between 75x75mm and 400x400mm.
• Lofttype: Identify your ceiling type (wood stud, concrete, or brick) to use the correct hardware.

5.2 Mounting the Ceiling Plate

Image 5.1: Easy installation methods for various ceiling types.

1. Position the ceiling plate at the desired location. Use a pencil to mark the six mounting holes.
2. Til træstolper: Drill pilot holes into the center of the wood stud. Secure the ceiling plate using the Lag Bolts and Washers.
3. Til beton-/murstensvæg: Drill holes using an appropriate drill bit for concrete/brick. Insert the Concrete Anchors into the drilled holes. Secure the ceiling plate using the Lag Bolts and Washers.
4. Ensure the ceiling plate is firmly attached and level.

5.3 Montering af TV'et på beslaget

1. Attach the TV mounting arms to the back of your television using the appropriate M4, M6, or M8 screws and spacers from the provided hardware kit. Ensure the arms are centered and securely fastened.
2. Carefully lift the television and hook the mounting arms onto the main bracket of the ceiling mount.
3. Secure the TV to the mount using the safety screws or locking mechanism, if applicable, to prevent accidental dislodgement.

Image 5.2: The BONTEC ceiling TV mount with a television installed.

6. Betjeningsvejledning

Once installed, the BONTEC OOXM3308 mount allows for various adjustments to achieve your preferred viewvinkel.

6.1 Højdejustering

The mount offers a height range of 580mm to 840mm. To adjust the height:

1. Loosen the manual screws on the central column.
2. Carefully slide the TV and lower column to the desired height.
3. Tighten the manual screws firmly to secure the height.

6.2 Tilting Adjustment

The TV plate can be tilted downwards by 25°.

1. Locate the tilt adjustment knob or mechanism on the mount.
2. Loosen the knob/mechanism.
3. Juster tv'et til den ønskede hældningsvinkel.
4. Tighten the knob/mechanism to lock the tilt in place.

6.3 Drejejustering

The mount allows for a ±90° swivel.

1. Gently rotate the TV to the left or right to achieve the desired viewvinkel.
2. The swivel mechanism is designed to hold its position once adjusted.

Billede 6.1: Eks.amples of the wide range of applications for the BONTEC ceiling TV mount.

7. Vedligeholdelse

• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Do not hang objects from the mount or TV.

8. Fejlfinding

• TV'et er ikke i vater: Check the ceiling plate installation for levelness. Adjust the TV mounting arms if they allow for minor leveling adjustments.
• Mount føles ustabil: Re-check all mounting screws and bolts. Ensure they are tightened according to the instructions. Verify the ceiling structure can support the weight.
• Vanskeligheder med at justere hældning/drejevinkel: Ensure no locking mechanisms or knobs are overtightened. Apply a small amount of silicone lubricant to moving parts if necessary, avoiding contact with electrical components.
• Manglende dele: Refer to Section 3, "Package Contents." Contact BONTEC customer support for replacement parts.

9. Specifikationer

10. Garanti og support

BONTEC products are designed for durability and performance. For warranty information, technical support, or assistance with installation, please contact BONTEC customer service through the retailer where the product was purchased or visit the official BONTEC webwebsted.

Gem venligst dit købsbevis for garantikrav.