LEOCH YTX9-BS Compatible Motorcycle Battery User Manual

1. Produktet er slutview

The LEOCH EB9-4 YTX9-BS is a 12V 8Ah sealed-type AGM (Absorbent Glass Mat) motorcycle battery designed for maintenance-free operation. This battery is pre-filled with electrolyte and charged at the factory, allowing for immediate installation upon receipt. It offers reliable starting performance and a long expected service life of 5-10 years under optimal conditions (25℃).

LEOCH EB9-4 YTX9-BS Motorcycle Battery — Image of the LEOCH EB9-4 YTX9-BS motorcycle battery, showing its top and side view with terminals.

This product adheres to international quality standards including IEC60896 and ISO9001, ensuring high quality and dependable performance. LEOCH batteries are widely adopted by many international motorcycle manufacturers as original equipment.

2. Tekniske specifikationer

Below are the key technical specifications for the LEOCH EB9-4 YTX9-BS battery:

Specifikation	Værdi
Liquid Filled Weight	Ca. 3 kg
Maximum External Dimensions (L x W x H)	150 mm x 87 mm x 105 mm
Voltage	12V
10-Hour Rate Capacity	8.0 Ah
CCA (Cold Cranking Amps)	120A
Terminaltype	A
Skal materiale	PP (polypropylen)
Forventet liv	5-10 years (at 25℃)

Detailed LEOCH EB9-4 Battery Specifications — A comprehensive chart detailing the physical and electrical specifications of the LEOCH EB9-4 battery, including dimensions, voltage, capacity, CCA, and discharge characteristics.

3. Installationsvejledning

The LEOCH EB9-4 battery is shipped pre-filled with electrolyte and fully charged, making it ready for immediate installation into your vehicle. No initial preparation such as adding acid or charging is required.

3.1 Sikkerhedsforanstaltninger

Brug altid passende personlige værnemidler (PPE), herunder sikkerhedsbriller og handsker, når du håndterer batterier.
Ensure the vehicle's ignition is off and all electrical accessories are disconnected before beginning installation.
Undgå at kortslutte batteripolerne.
Hold batteriet væk fra åben ild, gnister og varmekilder.

3.2 Installationstrin

Locate the battery compartment in your motorcycle. Refer to your motorcycle's service manual for specific instructions.
If replacing an old battery, disconnect the negative (-) terminal first, followed by the positive (+) terminal. Carefully remove the old battery.
Clean the battery tray and terminal cables to ensure good electrical contact.
Place the new LEOCH EB9-4 battery securely in the battery compartment.
Tilslut først den positive (+) terminal, derefter den negative (-) terminal. Sørg for, at forbindelserne er tætte og sikre.
Apply a thin layer of dielectric grease to the terminals to prevent corrosion.
Secure the battery with any straps or clamps provided by your motorcycle manufacturer.

Close-up of battery terminal — Nærbillede view of the battery terminal, highlighting the 'A' type terminal model.

Battery connected to charger — The LEOCH EB9-4 battery connected to a charger, demonstrating the charging process.

4. Betjening og brug

The LEOCH EB9-4 YTX9-BS battery is designed to provide reliable power for starting your motorcycle and operating its electrical systems. Its high-performance, maintenance-free design ensures consistent starting power.

4.1 Første opstart

After proper installation, the battery is ready to power your motorcycle. Turn the ignition key to the 'ON' position and attempt to start the engine as per your motorcycle's operating instructions.

4.2 Opladning

While the battery comes pre-charged, it is recommended to use a compatible motorcycle battery charger if the battery voltage drops significantly or if the motorcycle will be stored for an extended period. Refer to the battery's specifications for recommended charging rates (e.g., standard charge 0.8A for 5-10 hours, rapid charge 4.0A for 1 hour).

5. Vedligeholdelse

The LEOCH EB9-4 YTX9-BS is a maintenance-free battery, meaning it does not require electrolyte level checks or refilling. However, regular inspection and basic care will help maximize its lifespan and performance.

5.1 Regelmæssig kontrol

Terminalinspektion: Periodically check the battery terminals for cleanliness and tightness. Loose or corroded terminals can lead to poor performance and charging issues. Clean any corrosion with a wire brush and baking soda solution, then rinse with water and dry thoroughly.
Batterikasse: Inspect the battery case for any signs of damage, cracks, or swelling. A damaged case can indicate internal issues and may require battery replacement.
Voltage Tjek: If you have a multimeter, periodically check the battery's voltage. A fully charged 12V battery should read around 12.6V or higher when the engine is off.

5.2 Opbevaring

If the motorcycle will be stored for an extended period (e.g., over a month), it is recommended to disconnect the battery or use a trickle charger/battery maintainer to prevent discharge and prolong battery life. Store the battery in a cool, dry place.

eksploderede view of LEOCH EB9-4 battery components — An exploded diagram illustrating the internal components of the LEOCH EB9-4 maintenance-free battery, such as the cover, safety valve, heat seal cap, and special separators.

6. Fejlfinding

If you experience issues with your LEOCH EB9-4 battery, consider the following common troubleshooting steps:

Engine Cranks Slowly or Not at All: Dette indikerer ofte lav batteriopladning. Kontroller batteriets spænding.tage and recharge if necessary. Ensure terminals are clean and tight.
Lights Dim or Flickering: Similar to slow cranking, this suggests low battery voltage. Genoplad batteriet.
Batteri holder ikke opladning: After charging, if the battery quickly loses voltage, it may be sulfated or at the end of its service life. Consider testing the battery with a load tester or seeking professional assessment.
Korrosion på terminaler: Clean terminals thoroughly as described in the maintenance section. Ensure proper ventilation around the battery.

If problems persist after performing these checks, it is recommended to consult a qualified motorcycle mechanic or contact LEOCH customer support for further assistance.

7. Kompatible modeller

The LEOCH EB9-4 YTX9-BS battery is compatible with a wide range of motorcycles. It is a direct replacement for various battery models including YTX9-BS, OTX9-BS, BMX9-BS, CTX9-BS, STX9-BS, MTX9-BS, PTX9-BS, GTX9-BS, FTX9-BS, GETX9-BS, and BTX9-BS.

Specific compatible vehicle models include, but are not limited to:

Honda: Gixxer, Clubman, Impuls, Tilaver, Roadstar, VS 125, Diversion, Astrea XE400E, Artesia XE400E, Impuls 400, Epsilon, XANTHUS, Skywave, Skywave 250, Skywave 400, Spacey 125, Diversion DIVERSION, Desperado X Winder, Tempter, Ninja, Ninja 250R (EX250K8F, EX250K9F, EX250KAF), Bandit 400 -V, Bandit 600, Met-in Spacey, GSR250, Burgman, MALGUTI Blog 160, CBR600F.
Kawasaki: Z900, Z900RS, Z900RS Cafe, Ninja250, Ninja250ABS.
Andre: Denyo Welding Machine GAW-150SS.

Always verify the required battery specifications (voltage, capacity, dimensions, and terminal type) against your motorcycle's manual before purchase and installation to ensure full compatibility.

Motorcycle with compatible models list — A motorcycle with a list of compatible models for the EB9-4 battery, including various Honda, Yamaha, and Suzuki models.

8. Garanti og support

The LEOCH EB9-4 YTX9-BS battery comes with a 12 måneders kvalitetsgaranti fra købsdatoen. Denne garanti dækker materiale- og fabrikationsfejl under normal brug og service.

8.1 Garantikrav

To make a warranty claim, please retain your proof of purchase. Contact the retailer or LEOCH customer support with details of the issue. The warranty does not cover damage caused by misuse, improper installation, neglect, freezing, or unauthorized modifications.

8.2 Kundesupport

For technical assistance, troubleshooting, or warranty inquiries, please contact LEOCH customer support through the official LEOCH website or the retailer from whom you purchased the product. Please have your product model number and purchase date ready when contacting support.