Sharp XL-BH250 Limited Edition 5-Disc Bluetooth Speaker System

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sharp XL-BH250 Limited Edition 5-Disc Bluetooth Speaker System. This micro system offers a versatile audio experience with its 5-CD changer, digital player, AM/FM radio, USB input, and Bluetooth connectivity, all housed in a distinctive Champagne Gold and Carbon Fiber finish.

Please read this manual thoroughly before using the system to ensure proper operation and to maximize your listening enjoyment.

1. Opsætning

Follow these steps to set up your new audio system.

1.1 Udpakning

Fjern forsigtigt alle komponenter fra emballagen. Sørg for, at alle nedenstående dele er til stede:

• Hovedenhed (mikrokomponentsystem)
• venstre taler
• Højre højttaler
• Fjernbetjening
• AM-løkkeantenne
• FM-ledningsantenne
• Strømledning
• Brugervejledning (dette dokument)

Gem den originale emballage til fremtidig transport eller servicebehov.

1.2 Højttalertilslutning

Tilslut højttalerledningerne fra hovedenheden til de tilsvarende terminaler på bagsiden af ​​hver højttaler. Sørg for korrekt polaritet (+ til + og - til -) for optimal lydkvalitet.

The Sharp XL-BH250 system, showing the central unit with its 5-disc changer and control panel, flanked by two carbon fiber finish speakers. The main unit features a display showing "BLUETOOTH" and various control buttons and a volume knob.

1.3 Antenneforbindelse

For AM reception, connect the supplied AM loop antenna to the AM antenna terminals on the rear of the main unit. For FM reception, connect the supplied FM wire antenna to the FM antenna terminal. Extend the FM wire antenna fully for best reception.

1.4 Strømtilslutning

Plug the power cord into the AC inlet on the rear of the main unit, then plug the other end into a standard AC wall outlet (120V AC, 60Hz).

1.5 Indledende tænding

Tryk på PÅ STANDBY button on the front panel or the remote control to turn on the system. The display will illuminate.

2. Betjeningsvejledning

2.1 Tænd/sluk

Tryk på PÅ STANDBY button to toggle the system between On and Standby modes. In Standby mode, the system consumes minimal power.

2.2 Kildevalg

Tryk på FUNGERE button on the front panel or remote control repeatedly to cycle through available input sources: CD, Bluetooth, USB, AM, FM, and AUDIO IN.

Detail of the Sharp XL-BH250's central control panel, highlighting the display, disc indicators, and primary function buttons for source selection and playback.

2.3 CD-afspilning

1. Tryk på FUNGERE -knappen for at vælge CD-kilden.
2. Tryk på ÅBN/LUK button (if available, or refer to disc slot) to open the CD tray.
3. Place up to five CDs into the disc slots. Ensure the discs are placed correctly with the label side facing up.
4. Trykke PLAY/PAUSE (►/‖) for at starte afspilning.
5. Brug SKIP (◀◀/►►) knapper til at navigere mellem spor.
6. Trykke STOP (■) for at stoppe afspilningen.

The system supports CD-RW, CD-R, WMA, and MP3 playback formats.

2.4 Bluetooth-forbindelse

The system allows wireless audio streaming from Bluetooth-enabled devices.

1. Tryk på FUNGERE button to select the Bluetooth source. The display will show "BLUETOOTH" and begin searching for devices.
2. Aktiver Bluetooth på din Bluetooth-enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
3. Select "SHARP XL-BH250" from the list of found devices.
4. Once paired, the system will confirm the connection, and you can begin streaming audio.
5. For devices with NFC, simply tap the device to the NFC touchpoint on the system to initiate pairing.

2.5 USB-afspilning

Connect a USB flash drive containing MP3 or WMA audio files to the USB port on the front of the main unit. Select the USB source using the FUNGERE button. Playback will begin automatically or can be controlled using the playback buttons.

2.6 AM/FM-radio

1. Tryk på FUNGERE button to select AM or FM radio.
2. Brug TUNING buttons (often combined with skip buttons) to manually tune to a station.
3. To auto-scan and store presets, refer to the detailed instructions in the full manual (not provided here, but common functionality). The system supports 40 presets.

2.7 Audio In / Headphone Out

• AUDIO IN: Connect external audio devices (e.g., turntable with pre-amp, MP3 player) to the AUDIO IN jacks on the front panel using a 3.5mm stereo cable. Select the AUDIO IN source.
• TELEFON: Connect headphones to the PHONES jack on the front panel for private listening. Speaker output will be muted automatically.

2.8 Lydstyrkekontrol

Drej på BIND knappen på frontpanelet eller brug LYDSTYRKE +/- knapperne på fjernbetjeningen for at justere lydniveauet.

3. Vedligeholdelse

Proper care ensures the longevity and performance of your audio system.

3.1 Rengøring af enheden

Wipe the main unit and speakers with a soft, dry cloth. For stubborn stains, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use strong solvents like alcohol, benzene, or thinner, as they may damage the finish.

3.2 CD-linsepleje

Avoid touching the CD lens inside the disc tray. If the lens becomes dirty, use a commercially available CD lens cleaner disc. Do not attempt to clean the lens manually.

3.3 Speaker Care

Keep the speaker grilles free from dust. Do not press on the speaker cones, as this can cause damage.

4. Fejlfinding

Hvis du støder på problemer med dit system, kan du se følgende almindelige problemer og løsninger.

Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte Sharps kundesupport.

5. Specifikationer

Key technical specifications for the Sharp XL-BH250 Micro Component System.

• Modelnummer: XL-BH250(GL)
• Produktmål (B x D x H): 6.9 x 12.4 x 9.5 tommer (hovedenhed)
• Varens vægt: 15.73 pund
• Forbindelse teknologi: Bluetooth, USB, NFC
• Højttalertype: Stereoanlæg
• CD skifter: 5-Disk
• Understøttede afspilningsformater: CD-RW, CD-R, WMA, MP3
• Tuner: Digital AM/FM med 40 forudindstillinger
• Indgange: Audio Line-in, USB
• Udgange: Hovedtelefoner

6. Garanti og support

Sharp products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharp webwebsted.

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Sharp customer support. Contact information can typically be found on the Sharp webwebsted eller i produktemballagen.

Du kan også besøge Sharp Store på Amazon for yderligere produktinformation og supportressourcer.