AQUAPHOR City Bottle Filter Pack (Model 508463) Instruction Manual

Indledning

The AQUAPHOR City Bottle Filter Pack provides activated carbon fiber filters designed for use with the AQUAPHOR City Bottle. These filters are engineered to reduce chlorine and other impurities from tap water, offering improved taste and quality for on-the-go hydration. Each filter has a capacity of 150 liters.

AQUAPHOR City Bottle next to 300 half-liter plastic bottles

Image: The AQUAPHOR City Bottle filter capacity is equivalent to 300 single-use 0.5-liter plastic bottles.

Opsætning og første brug

Before using your AQUAPHOR City Bottle filter for the first time, follow these steps:

Pak filteret ud: Carefully remove the new filter from its packaging.
Skyl filteret: Rinse the filter under cold running tap water for approximately 30 seconds. This helps to remove any loose carbon dust.
Installer filteret: Insert the rinsed filter firmly into the designated slot within the AQUAPHOR City Bottle lid. Ensure it is securely seated to prevent leaks and ensure proper filtration.
Fyld flasken: Fill the bottle with tap water.
Klargør filteret: Take a few sips of water through the filter. The first few sips may contain some carbon particles; this is normal and harmless. Discard the first full bottle of filtered water to ensure the filter is fully primed.

Image: The AQUAPHOR City Bottle replacement filter, ready for installation.

Betjeningsvejledning

Using your AQUAPHOR City Bottle with the filter is straightforward:

Fyld med vand: Open the bottle lid and fill the bottle with cold tap water. Do not use hot water or water from unknown sources.
Luk låget: Securely close the lid, ensuring the filter is properly seated. The bottle features a leak-proof design when closed correctly.
Drikke: To drink, open the one-handed lid and sip through the mouthpiece. The water will be filtered as you drink.

Person filling an AQUAPHOR City Bottle from a public water fountain

Image: Filling the AQUAPHOR City Bottle from a water source for filtration.

Diagram showing active water filtration process within the bottle

Image: Illustration of the active water filtration mechanism inside the AQUAPHOR City Bottle.

Opretholdelse

Proper maintenance ensures the longevity of your bottle and the effectiveness of the filter.

Rengøring af flasken

The AQUAPHOR City Bottle is designed for kun håndvask. Do not place the bottle or lid in a dishwasher.
Wash the bottle and lid regularly with warm, soapy water. Rinse thoroughly.
Sørg for, at alle dele er helt tørre, inden de samles eller opbevares igen, for at forhindre mug eller meldug.

Udskiftning af filter

Each filter has a capacity of 150 liters (approximately 39.5 gallons).
Replace the filter after 150 liters of use or every 1-2 months, whichever comes first, to maintain optimal filtration performance.
To replace, simply remove the old filter from the lid and install a new one following the "Setup and First Use" instructions.

Nærbillede view of the AQUAPHOR City Bottle filter element

Billede: Detaljeret view of the AQUAPHOR City Bottle filter, indicating its replaceable nature.

Fejlfinding

Problem	Mulig årsag	Løsning
Difficulty drawing water / Requires significant suction	Filter not fully primed or clogged; airlock in the system.	Ensure the filter was rinsed for 30 seconds before first use. Discard the first full bottle of filtered water to fully prime the filter. Check if the filter is securely installed in the lid. If the filter is old, replace it.
Water tastes unusual or unfiltered	Filter not installed correctly or expired.	Verify the filter is firmly seated in the lid. Check the filter's usage duration; replace if it has exceeded 150 liters or 1-2 months.
Flaskelækager	Lid not closed properly or seal is damaged.	Ensure the lid is tightly screwed onto the bottle. Check the silicone seal within the lid for any damage or misalignment.

Specifikationer

Mærke: AQUAPHOR
Modelnavn: Water Filter (for City Bottle)
Modelnummer: 508463
Materiale: Carbon Fibre Plastic (BPA-Free)
Filterkapacitet: 150 liter (ca. 39.5 gallon)
Produktdimensioner: Approximately 3"W x 9"H (for the bottle, filter dimensions are smaller)
Vedligeholdelsesinstruktioner: Kun håndvask
Speciel funktion: Washable (bottle components, not filter)
Genanvendelighed: Reusable bottle, replaceable filter
Item Weight (Filter Pack): 2.11 ounce (0.06 kilo)

Garanti og support

For warranty information or technical support regarding your AQUAPHOR City Bottle Filter Pack, please refer to the official AQUAPHOR webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.

Online support: Visit the official AQUAPHOR webwebsted for ofte stillede spørgsmål, produktregistrering og kontaktoplysninger.

Kontakt producent: AQUAPHOR

Vigtige sikkerhedsoplysninger

Må ikke bruges med vand, der er mikrobiologisk usikkert eller af ukendt kvalitet uden tilstrækkelig desinfektion før eller efter systemet.
Do not expose the filter to freezing temperatures. If the filter freezes, its integrity may be compromised, and it should be replaced.
Opbevares utilgængeligt for små børn.
Only use genuine AQUAPHOR replacement filters to ensure proper performance and safety.

Videoressourcer

No official product videos from the seller were found for this item. Please refer to the written instructions and images provided.

AQUAPHOR 508463

AQUAPHOR City Bottle Filter Pack Instruction Manual