SunTouch 120010WD-KIT-CPWiFi

SunTouch ConnectPlus WarmWire Under Floor Heating Kit Instruction Manual

Model: 120010WD-KIT-CPWiFi | Brand: SunTouch

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SunTouch ConnectPlus WarmWire Under Floor Heating Kit. Please read this manual thoroughly before beginning installation or operation to ensure safe and efficient use of the product. This kit is designed to provide radiant floor heating for areas up to 10 square feet, operating at 120V.

SunTouch ConnectPlus WarmWire Under Floor Heating Kit components including heating cable, thermostat, and sensor.

Figure 1: SunTouch ConnectPlus WarmWire Under Floor Heating Kit components.

Sikkerhedsoplysninger

Always follow local electrical codes and consult a qualified electrician for installation. Ensure power is disconnected before any installation or maintenance. Do not cut the heating cable. Avoid damaging the cable during installation. The system must be protected by a Ground Fault Circuit Interrupter (GFCI).

Opsætning og installation

The WarmWire heating cable is designed for installation beneath tile, stone, wood, or laminate flooring. It can be installed over plywood, backer board, or concrete slab. Maintain a 3-inch spacing for the heating cable. The cable cannot be cut to fit; plan your layout carefully to accommodate the entire length of the cable within the desired heating area.

WarmWire heating cable being installed on a subfloor with proper spacing.

Figur 2: Eksample of WarmWire heating cable installation on a subfloor.

Installation trin overview:

  1. Klargør undergulvet: Sørg for, at undergulvet er rent, plant og strukturelt solidt.
  2. Planlæg layoutet: Determine the heating area and plan the cable routing, ensuring 3-inch spacing and avoiding obstructions.
  3. Install the Heating Cable: Secure the WarmWire cable to the subfloor using appropriate methods (e.g., strapping, hot glue) according to the planned layout.
  4. Installer gulvsensoren: Place the floor sensor cable between two runs of heating cable, centered within the heated area, and route it to the thermostat location.
  5. Tilslut til termostat: Route the heating cable leads and floor sensor cable to the electrical box where the SunStat ConnectPlus Wi-Fi Thermostat will be installed.
  6. Test systemet: Before covering the cable, perform resistance tests as per the detailed instructions in the full installation guide to ensure proper functionality.
  7. Apply Self-Leveling Mortar/Thin-Set: Cover the heating cable and sensor with a suitable self-leveling mortar or thin-set, ensuring full encapsulation.
  8. Monter gulvbelægning: Once the mortar/thin-set has cured, install your chosen flooring material.

Helpful Installation Videos:

SunTouch ConnectPlus Installation Video

This video provides a visual guide to the installation process of the SunTouch ConnectPlus system, demonstrating key steps for proper setup.

SunTouch Warm Wire ConnectPlus Kit Overview

En overview of the SunTouch WarmWire ConnectPlus Kit, detailing its components and general installation considerations.

Operating the SunStat ConnectPlus Wi-Fi Thermostat

The SunStat ConnectPlus Wi-Fi Thermostat offers advanced control over your floor heating system. It features a large touchscreen display and can operate in either floor or air-sensing temperature control modes. Monitor energy usage directly from the thermostat or via the mobile app.

SunStat ConnectPlus Wi-Fi Thermostat mounted on a wall in a modern living space.

Figure 3: SunStat ConnectPlus Wi-Fi Thermostat in a home setting.

Nøglefunktioner:

  • Touchscreen interface: Easily adjust settings and view systemstatus.
  • Floor or Air Sensing: Choose your preferred temperature control method for optimal comfort.
  • Energy Use Monitoring: Track your heating system's energy consumption.
  • Stemmestyring: Kompatibel med Amazon Alexa og Hey Google til håndfri betjening.
  • Watts Home Mobile App: Control your system remotely from anywhere using the free app (available on App Store and Google Play).
  • Overstrøm og Voltage-Level Sensing: Built-in safety features to protect your system.
Diagram showing various features of the SunStat ConnectPlus thermostat including automated temperature control, remote features, energy use monitoring, touchscreen, voice compatibility, and display options.

Figure 4: SunStat ConnectPlus Thermostat features overview.

Smartphone displaying the Watts Home mobile app for remote control of the heating system.

Figure 5: Remote control via the Watts Home App.

Opretholdelse

The SunTouch WarmWire system is designed for minimal maintenance. Once installed and properly covered by flooring, the heating cable requires no routine maintenance. Periodically check the SunStat ConnectPlus Wi-Fi Thermostat for any error codes or unusual behavior. Ensure the thermostat's screen is clean for optimal touch response. Keep the Watts Home app updated to the latest version for access to new features and security improvements.

Fejlfinding

If your heating system is not functioning as expected, consider the following basic troubleshooting steps:

  • Ingen varme: Check the circuit breaker for the heating system. Ensure the thermostat is set to a temperature above the current floor/air temperature. Verify the thermostat is powered on and not displaying any error codes.
  • Termostaten reagerer ikke: Ensure the thermostat is properly seated on its base. If using the Watts Home app, check your Wi-Fi connection and ensure the app is updated.
  • Ujævn opvarmning: This is rare with properly installed WarmWire. Ensure the floor sensor is correctly placed and not damaged.
  • Fejlkoder: Refer to the full SunStat ConnectPlus Wi-Fi Thermostat manual for specific error code interpretations and solutions.

For persistent issues, contact SunTouch customer support or a qualified electrician.

Specifikationer

FeatureDetalje
MærkeSunTouch
ModelnavnWarmWire
Varemodelnummer120010WD-KIT-CPWiFi
UPC840213021818
Voltage120 volt
Wattage120 watt
Opvarmet område10 Sq. Ft. (with 3" spacing)
Controller typeAmazon Alexa, Android, iOS
ForbindelsesteknologiWi-Fi
Inkluderede komponenter120V Heating wire, ConnectPlus Thermostat, floor sensor, instruction manual
MaterialePlastic (Thermostat)
Varens vægt4.64 pund
Produktdimensioner11.25 x 13.56 x 10.5 tommer
Specifikation MetUL-listet

Garanti og support

SunTouch products are backed by over 30 years of experience in electric radiant heating. For detailed warranty information and technical support, please refer to the official SunTouch website or contact their customer service. SunTouch is committed to delivering quality products and world-class support.

Besøg SunTouch Store on Amazon for flere produkter og information.

© 2026 SunTouch. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.