FINGERS FR-630 UPS Power Supply User Manual

1. Vigtige sikkerhedsinstruktioner

Please read and understand all safety instructions before installing or operating your FINGERS FR-630 UPS. Keep this manual for future reference.

• Åbn ikke UPS'en casing. Der er ingen dele indeni, som kan serviceres af brugeren.
• Do not expose the UPS to rain, moisture, or direct sunlight.
• Sørg for, at UPS'en er tilsluttet en jordet stikkontakt.
• Bloker ikke ventilationsåbninger.
• Avoid placing the UPS near heat sources or in areas with excessive dust.
• Disconnect the UPS from the power source before cleaning.

2. Produktet er slutview

The FINGERS FR-630 is a Line Interactive Uninterrupted Power Supply (UPS) designed to provide reliable power protection for your electronic devices. It features Automatic Voltage Regulation (AVR) and a fast recharge capability.

Figure 2.1: FINGERS FR-630 UPS highlighting 33% faster recharge capability.

Nøglefunktioner:

• 600VA/360W kapacitet: Provides sufficient power backup for various devices.
• 33 % hurtigere genopladning: Ensures quicker battery recovery compared to standard UPS units.
• AVR Stabilization: Boost and Buck Automatic Voltage Regulation stabilizes fluctuating voltages.
• Smart Microprocessor Control: For reliable performance and precise voltage overvågning.
• Automatisk genstart: Automatically restarts connected appliances after AC power returns.
• Koldstartstilstand: Allows the UPS to power on without AC input.
• Generator/inverter kompatibel: Designed to work seamlessly with generator and inverter power sources.

Figur 2.2: Forside view of the FINGERS FR-630 UPS, indicating its 600VA/360W capacity.

Figur 2.3: Side view of the FINGERS FR-630 UPS, highlighting its compatibility with generators and inverters.

3. Opsætning og installation

1. Udpakning: Tag forsigtigt UPS'en ud af emballagen. Undersøg den for eventuelle forsendelsesskader.
2. Placering: Place the UPS on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate clearance around the ventilation openings.
3. Indledende opkrævning: Before first use, connect the UPS to a standard AC power outlet for at least 8 hours to ensure the battery is fully charged. The UPS will charge whether it is turned on or off.
4. Tilslutning af enheder: Plug your computer, monitor, router, or other critical electronic devices into the output sockets on the rear of the UPS. Do not connect laser printers or other high-surge devices to the UPS output, as this may overload the unit.
5. Strømtilslutning: Sæt UPS-strømledningen i en jordet stikkontakt.

4. Betjening

Tænd/sluk:

• At tænde: Press and hold the power button for approximately 3 seconds until you hear a beep and the indicators light up.
• At slukke: Tryk på tænd/sluk-knappen og hold den nede i cirka 3 sekunder, indtil indikatorerne slukker.

Indikatorlys:

Automatisk voltage Forordning (AVR):

The UPS automatically detects and corrects minor voltage fluctuations (sags or surges) without switching to battery power, protecting your devices and extending battery life.

Kold start funktion:

The UPS can be powered on using its internal battery even when there is no AC input. To activate, ensure the UPS is off, then press and hold the power button until the unit starts.

5. Vedligeholdelse

• Batteripleje: To maximize battery life, ensure the UPS is connected to AC power and fully charged at all times. If the UPS is stored for an extended period, recharge it every three months.
• Rensning: Brug en blød, tør klud til at rengøre UPS'ens yderside. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosol.
• Ventilation: Kontrollér regelmæssigt, at ventilationsåbningerne er fri for støv og blokeringer for at forhindre overophedning.
• Udskiftning af batteri: The internal battery is a sealed lead-acid type. Battery replacement should only be performed by qualified service personnel.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

Garanti: This FINGERS FR-630 UPS Power Supply comes with a 1 års garanti fra købsdatoen. Gem venligst din købskvittering som garantibevis.

The warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Støtte: For technical assistance, troubleshooting, or warranty claims, please contact FINGERS customer support.

• Fabrikant: Dynamisk Konglomerat Pvt. Ltd.
• Adresse: 329/330, GIDC Phase II, Near Sardar Chowk, Vapi, Valsad, Gujarat, 396195, India.
• Please refer to the official FINGERS webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.