S866 LCD Instrument and Controller Kit User Manual

1. Produktet er slutview

The Dilwe S866 LCD Instrument and Controller Kit is designed for converting lithium battery-powered bicycles or scooters into electric riding vehicles. It is typically suitable for 1000W motors and operates with DC 36V/48V systems. The kit includes a robust controller and an intuitive LCD display, providing essential information and control over your electric vehicle's performance.

Nøglefunktioner:

• Rainproof LCD backlight display for clear visibility of status and data.
• Controller shell made of metal with a groove design for good heat dissipation, protecting internal circuits from thermal overload.
• Provides stable speed and sensitive control for braking and direction changes.
• Comprehensive control settings including power switch, wheel diameter, idle speed sleep time, backlight brightness, startup mode, drive mode, voltage level, and controller limit value.

Figure 1: The S866 LCD Instrument and Controller Kit, featuring the main controller unit and the S866 LCD display.

2. Components and Wiring

The kit consists of the main controller unit and the S866 LCD display. Proper wiring is crucial for the correct function of the system. The controller features various color-coded wires for different connections.

2.1 Controller Wire Color Definition:

• Yellow, Green, Blue Single Big Head Wire: Motor Wire
• Red-white-black-blue-green-yellow Double Row Six-wire Port: Motor Wire
• Red and Black Single Big Head Line: Power Line
• Red, Blue, Black, Green and Yellow Single-row Five-wire Port: Instrument Line
• Black and Yellow Lines (two): Power off Brake Handle Line
• Red and Black Lines: Throttle Dial Line
• Brown-black-yellow Line: Power Sensor Line
• Black and Red Lines (two): Headlight Lines

2.2 Ledningsdiagram:

Figure 2: Comprehensive wiring diagram illustrating connections for the motor, display, throttle, brake, power assist sensor, battery, and lights.

Tip til installation: Connect the controller to the corresponding line interfaces as per the diagram to ensure proper functionality. Ensure all connections are secure before powering on the system.

3. Betjeningsvejledning

The S866 LCD display provides real-time data and allows for various system adjustments. The meter is compatible with DC 24V, 36V, 48V, and 60V systems (voltage selection setting available on the meter).

3.1 Displayfunktioner:

• Hastighedsvisning: Shows current speed (Avg: Average Speed, Max: Maximum Speed, Speed: Current Speed) in Mp/h or Km/h. The speed signal is derived from the motor's Hall signal.
• Batteriindikator: Displays battery power and remaining power.
• Fejlindikator: Alerts to system errors.
• Kilometertal: Shows total mileage (ODO) and single trip mileage (TRIP).
• Single Boot Time: Displays the duration of the current ride.
• Batteri Voltage (VOL): Viser det aktuelle batterivolumentage.
• sommertid: Battery life indication.
• Vehicle Power Gear Adjustment: 0-9 digitalt display og gearbar display.

3.2 Control Setting Functions:

• Strømafbryderkontrol
• Indstilling af hjuldiameter
• Idle Speed Automatic Sleep Time Setting
• Indstilling af baggrundslys lysstyrke
• Startup Mode Setting
• Indstilling af køretilstand
• Voltage Niveauindstilling
• Controller Limit Value Setting

Figure 3: The S866 LCD display mounted on a bicycle handlebar, providing a clear view of operational data.

Figure 4: A close-up of the S866 LCD display, highlighting its control buttons and screen interface.

3.3 Produktdemonstrationsvideo:

4. Vedligeholdelse

To ensure the longevity and optimal performance of your S866 LCD Instrument and Controller Kit, follow these general maintenance guidelines:

• Keep the controller and display clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Undgå at udsætte komponenterne for ekstreme temperaturer eller direkte sollys i længere perioder.
• Ensure all wiring connections remain secure. Periodically check for any loose or damaged wires.
• While the display is rainproof, avoid submerging the unit in water.
• Do not attempt to open the controller or display housing, as this may void any potential warranty and could damage internal components.

5. Fejlfinding

If you encounter issues with your S866 LCD Instrument and Controller Kit, refer to the following common troubleshooting steps:

5.1 Common Error Codes:

• Fejl 30: This error typically indicates a communication issue between the display and the controller.

5.2 Troubleshooting Steps:

1. Tjek alle forbindelser: Ensure all wires are securely plugged into their respective ports on both the controller and the display. Loose connections are a common cause of communication errors.
2. Bekræft strømforsyning: Confirm that the battery is adequately charged and providing the correct voltage (36V/48V).
3. Inspect for physical damage: Look for any visible damage to the wires, connectors, controller, or display.
4. Nulstil systemet: Sluk for strømmen, vent et par sekunder, og tænd den derefter igen.
5. Avoid changing Setting 20: Some users have reported issues after modifying 'Setting 20'. It is advised not to alter this setting as it may lead to communication problems or other malfunctions.

Hvis problemet fortsætter efter at have forsøgt disse trin, bedes du kontakte kundesupport for yderligere assistance.

6. Specifikationer

Figure 5: Dimensions of the S866 Controller Box and LCD Display.

7. Garanti og support

For any product-related inquiries, technical support, or warranty claims, please contact Dilwe customer service. Keep your purchase receipt as proof of purchase.

You can visit the official Dilwe store for more information and support: Dilwe Store on Amazon