HMF 46126-11 Small Safe with Electronic Combination Lock

1. Introduktion

This manual provides essential instructions for the proper installation, operation, and maintenance of your HMF 46126-11 Small Safe. Designed for securing cash, valuables, and documents, this safe features a robust steel construction and an electronic combination lock for reliable protection. Please read this manual thoroughly before using the safe to ensure optimal performance and security.

Image 1.1: The HMF 46126-11 small safe, featuring its electronic keypad and emergency lock. The keypad includes a low battery warning indicator.

2. Sikkerhedsoplysninger

• Opbevar ikke nødnøglerne inde i pengeskabet. Opbevar dem et sikkert, separat sted.
• Undgå at udsætte pengeskabet for ekstreme temperaturer eller fugtighed.
• Sørg for, at pengeskabet er sikkert monteret for at forhindre uautoriseret fjernelse.
• Change the factory default code immediately after initial setup.
• Do not use abrasive cleaners on the safe's surface.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1 x HMF 46126-11 Small Safe
• 2 x nødnøgler
• 2 x Metal Anchors
• 2 x fastgørelsesskruer
• 1 x brugermanual

4. Produktet er slutview

Billede 4.1: Interiør view of the safe, showing space for A5 documents and small valuables, along with integrated key hooks on the door.

Image 4.2: Close-up of the electronic keypad, featuring number buttons, a rotary knob for opening, and indicator lights.

5. Installation

5.1 Valg af placering

Select a discreet and secure location for your safe. It can be mounted to a wall or floor. Ensure the surface is solid enough to support the safe's weight and resist tampering.

5.2 Monteringsvejledning

The safe features pre-drilled holes for easy installation. Use the provided metal anchors and fixing screws to secure the safe.

1. Placer pengeskabet på det ønskede sted.
2. Marker borepunkterne gennem de forborede huller på bagsiden eller bunden af ​​pengeskabet.
3. Drill holes into the wall or floor using an appropriate drill bit (not included).
4. Insert the metal anchors into the drilled holes.
5. Align the safe with the anchors and secure it using the fixing screws. Tighten firmly.

Image 5.1: The safe's pre-drilled holes for wall or floor mounting, along with the included fixing hardware.

Billede 5.2: Bagside view of the safe, highlighting the pre-drilled holes for secure installation.

6. Indledende opsætning

6.1 Åbning af pengeskabet for første gang

Upon receiving your safe, it will be locked. Use one of the provided emergency keys to open it for the first time.

1. Find nødnøglehullet, som normalt er skjult bag et lille dæksel på tastaturpanelet.
2. Insert an emergency key and turn it clockwise.
3. While the key is turned, rotate the knob on the keypad counter-clockwise to open the safe door.

Image 6.1: Demonstrates inserting the emergency key into the hidden keyhole to unlock the safe.

6.2 Batteriinstallation

The electronic lock requires batteries (typically AA, not always included). The battery compartment is usually located on the inside of the safe door.

1. Åbn pengeskabsdøren med nødnøglen.
2. Find batteridækslet på indersiden af ​​døren.
3. Remove the cover and insert the required batteries, ensuring correct polarity (+/-).
4. Sæt batterirummets dæksel på igen.

6.3 Indstilling af din personlige kombinationskode

It is crucial to set your personal code immediately after installing batteries. The code can be 3 to 8 digits long.

1. Mens pengeskabslågen er åben, skal du trykke på den røde nulstillingsknap, der er placeret på indersiden af ​​døren, nær hængslet. Du vil høre et bip.
2. On the keypad, enter your desired 3 to 8 digit code.
3. Press the '#' button to confirm. You will hear a confirmation beep.
4. Test the new code with the door open before closing it. Enter your code, then rotate the knob counter-clockwise.

Image 6.2: A hand demonstrating the process of entering a personal access code on the electronic keypad.

7. Betjening

7.1 Åbning af pengeskabet med din kode

1. Enter your personal 3 to 8 digit code on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Within 5 seconds, rotate the knob counter-clockwise to open the door.

7.2 Lukning og låsning af pengeskabet

1. Luk pengeskabsdøren.
2. Rotate the knob clockwise to engage the locking bolts. The safe is now secured.

7.3 Emergency Opening

In case of forgotten code or dead batteries, you can use the emergency keys.

1. Locate the emergency keyhole (refer to Section 6.1).
2. Insert an emergency key and turn it clockwise.
3. Mens nøglen er drejet, drej knappen mod uret for at åbne pengeskabslågen.

8. Vedligeholdelse

8.1 Udskiftning af batteri

When the 'LOW BATTERY WARNING' indicator lights up or the safe fails to open with the code, it's time to replace the batteries.

1. Open the safe using the emergency key (if batteries are completely dead).
2. Replace all batteries in the compartment (refer to Section 6.2).
3. Test the electronic lock with your code after replacement.

8.2 Rengøring

Tør pengeskabets yderside af med en blød, tør kludamp cloth. Do not use harsh chemicals or abrasive materials, as they can damage the finish or electronic components.

8.3 Nøglepleje

Keep emergency keys in a safe, accessible location outside the safe. Avoid bending or damaging the keys.

9. Fejlfinding

10. Specifikationer

Image 10.1: Visual representation of the safe's external dimensions (23x17x17 cm) and internal capacity, suitable for A5 documents.

11. Garanti og support

Your HMF safe is manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries, please contact HMF customer service through the official website or your point of purchase. Please have your model number (46126-11) ready when contacting support.