Lunderg Bed Assist Rail with Motion-Activated Light (13-inch Model)

VIGTIGE SIKKERHEDSADVARSLER

WARNING: ENTRAPMENT, STRANGULATION, SUFFOCATION AND FALL HAZARDS

• Huller i og omkring dette produkt kan fange og dræbe.
• Individuals with Alzheimer's disease or dementia, or those who are sedated, confused, or frail, are at increased risk of entrapment and strangulation.
• Individuals attempting to climb over this product are at increased risk of injury or death from falls.
• Always ensure this product is properly secured to the bed. If the product can move away from the bed or mattress, it can lead to entrapment and death.
• NEVER use unless the product is tight against the mattress, without gaps, and at least 12.5 inches from the headboard and footboard.
• Brug ALDRIG sammen med børn.
• NEVER use on toddler, bunk, water, or inflatable beds, beds with soft compressible pads, articulated beds, or on beds with a mattress height taller than 13 inches (33cm) or shorter than 7 inches (17.8cm).
• ONLY use with twin, full/double, queen, and king size beds.

Produkt overview

The Lunderg Bed Assist Rail is designed to provide stability and support for individuals needing assistance getting in and out of bed. This 13-inch model features a motion-activated light for enhanced nighttime safety and a non-slip grab bar for secure handling. Constructed from durable carbon steel, it offers robust support and is compatible with a wide range of bed sizes and mattress heights.

Nøglefunktioner:

• Enhanced Safety & Independence: Helps prevent roll-offs and provides an ergonomic, non-slip grip handle for sitting up and standing unassisted, reducing fall risk.
• Motion-Activated Safety Light: Automatically illuminates upon detecting movement, providing gentle light for nighttime trips. The rechargeable battery offers weeks of use on a single charge, with a 60-second auto-off feature.
• Tool-Free, Quick Setup: Patented design allows for assembly in approximately 5 minutes. The unit arrives partly pre-assembled for ease of installation.
• Sturdy Carbon Steel Construction: Built from heavy-duty carbon steel and load-tested to 300 lbs, featuring four horizontal stabilizing bars for firm, wobble-free support.
• Universal Bed Fit: Compatible with twin, full/double, queen, and king-sized beds. Works with box springs, slats, or platform beds. Not suitable for adjustable beds.

Opsætning og installation

The Lunderg Bed Assist Rail is designed for quick and easy, tool-free assembly. Follow these steps to install your bed rail securely.

Komponenter inkluderet:

• Upper U-bar (with padded handle)
• Under bed U-bar
• Two L-bars
• C-clips (2 required, 1 extra included)
• Motion Sensor LED Safety Light
• USB opladningskabel
• Glow-in-the-dark Snap Band
• Safety Frame Strap

Monteringstrin:

1. Connect L-bars to Upper U-bar: Slide the two L-bars into the designated openings on the upper U-bar. Ensure the pushpins snap securely into place.
2. Connect L-bars to Under Bed U-bar: Slide the other ends of the L-bars into the under bed U-bar. Secure each side with a C-clip after aligning the holes.
3. Install Motion Sensor Light: After charging the motion sensor LED safety light, set it to 'AUTO' mode. Slide it into the designated slot on the light bar of the upper U-bar. It is secured by magnets.
4. Attach Glow-in-the-Dark Snap Band: Ensure the glow-in-the-dark snap band is securely attached to the padded handle.
5. Secure with Frame Strap: Loop the safety frame strap around the under bed U-bar. Attach the clips and place the bed rail and frame strap under the mattress. Go to the other side of the bed, lift the mattress, grab the strap, unclip it, and attach it to the bed frame. Tuck any excess strap under the mattress to prevent tripping hazards.
6. Madrasposition: Ensure the mattress is set back in place, firmly against the bed rail.

Video: How to Setup Your Lunderg Bed Assist Rail

Video 1: This instructional video demonstrates the step-by-step process of setting up your Lunderg Bed Assist Rail, ensuring correct and secure installation.

Bed Compatibility:

The Lunderg Bed Assist Rail is designed for universal fit with most bed types, including twin, full/double, queen, and king sizes, and mattresses between 7-13 inches in height. It works with box spring, slats, or platform beds.

IMPORTANT: Not suitable for adjustable beds, sleep number beds, automatic lift beds, open platform beds, or adjustable mattress platforms.

Betjeningsvejledning

Using the Bed Assist Rail:

Once installed, the Lunderg Bed Assist Rail provides a stable grab bar to assist with sitting up, getting in, and getting out of bed. Always apply even pressure and ensure the rail is securely in place before relying on it for full support.

Motion-Activated Safety Light:

The included motion-activated LED safety light enhances visibility during nighttime. It is rechargeable via a USB cable.

Lysindstillinger:

• The light has three settings: ON, OFF, and AUTO.
• In AUTO mode, the light will activate when motion is detected in a dark environment and turn off after 60 seconds. This mode conserves battery life.
• The AUTO setting only functions in the dark. It will not activate in daylight.

Justering af lysstyrke:

• Press the 'Adjust' button on the side of the light to toggle between high and low brightness levels.

Opladning af lyset:

• When the battery is at 10% life, the light will begin pulsing on and off, indicating it needs charging.
• Use the included USB cable to charge the light via the USB charging port.
• A red light indicates charging; a blue light indicates a full charge.
• A power adapter is NOT included.

Video: Lunderg Motion Sensor Light Instructional Video

Video 2: This video provides detailed instructions on the different settings and functions of the Lunderg Motion Sensor LED Light, including how to charge it and its operational modes.

Opretholdelse

To ensure the longevity and safe operation of your Lunderg Bed Assist Rail, follow these simple maintenance guidelines:

• Rensning: Tør sengehesten af ​​med enamp cloth as needed. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or materials.
• Regelmæssig inspektion: Periodically check all connections, pushpins, and the safety strap to ensure they are secure and free from wear or damage. Replace any worn or damaged parts immediately.
• Motion Sensor Light: Keep the motion sensor clean and free from obstructions to ensure optimal performance. Charge the light regularly as indicated by the pulsing light.

Fejlfinding

If you encounter any issues with your Lunderg Bed Assist Rail, please refer to the following common solutions:

• Rail feels wobbly: Ensure all L-bars are fully inserted and pushpins are snapped into place. Verify that the C-clips are securely fastened. Double-check that the safety frame strap is tightly secured around the bed frame and under the mattress.
• Motion sensor light not working: Check if the light is set to 'AUTO' mode. Ensure the room is dark enough for the sensor to activate. Charge the light using the provided USB cable if the battery is low.
• Vanskeligheder ved installation: Refer to the detailed setup instructions and accompanying video. Ensure you are using the correct parts for each connection (numbered arrows on components). Confirm your bed type and mattress height are compatible with the rail.

For further assistance, please contact Lunderg customer support.

Specifikationer

Garanti og support

Lunderg is committed to providing high-quality products and excellent customer service. For any questions, concerns, or warranty claims regarding your Bed Assist Rail, please contact our customer support team.

Our dedicated support team is available to assist you and will respond to inquiries promptly, typically within 24 hours.