ZEBRONICS ZEB-BRO

ZEBRONICS Zeb-Bro Wired Earphones User Manual

Model: ZEB-BRO

Indledning

Thank you for choosing the ZEBRONICS Zeb-Bro Wired Earphones. These earphones are designed to provide a comfortable listening experience with clear audio and convenient features. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new earphones.

Hvad er der i æsken:

  • ZEBRONICS Zeb-Bro Wired Earphones
  • Brugermanual
ZEBRONICS Zeb-Bro Wired Earphones in green, showing the earbuds, in-line microphone, and 3.5mm audio jack.

Figure 1: ZEBRONICS Zeb-Bro Wired Earphones (Green)

Opsætning

Setting up your Zeb-Bro earphones is straightforward. Follow these steps to begin using your device.

Tilslutning til din enhed:

  1. Find 3.5 mm lydstikket på din smartphone, tablet, bærbare computer eller anden kompatibel lydenhed.
  2. Insert the 3.5mm connector of the Zeb-Bro earphones firmly into the audio jack of your device.
  3. Sørg for, at forbindelsen er sikker for at forhindre lydafbrydelser.
Close-up of the 3.5mm audio jack of the ZEBRONICS Zeb-Bro earphones, highlighting its compatibility.

Figure 2: 3.5mm Audio Jack Connection

Brug af høretelefoner:

  • Gently insert each earbud into the corresponding ear canal (Left earbud into the left ear, Right earbud into the right ear).
  • Adjust the earbuds for a comfortable and snug fit. A proper fit helps in achieving optimal sound quality and passive noise isolation.
An earbud inserted into a human ear, demonstrating the snug and comfortable fit for deep bass audio.

Figure 3: Proper Earbud Placement for Optimal Sound

Betjeningsvejledning

The Zeb-Bro earphones are designed for simple and intuitive operation.

Lydafspilning:

  • Once connected, play audio from your device. The earphones will automatically output sound.
  • Adjust the volume using your connected device's volume controls.
Close-up of a single earbud, highlighting the 10mm driver for enhanced audio performance.

Figure 4: 10mm Audio Driver for Clear Sound

Opkaldsfunktion:

The in-line microphone allows for hands-free calling.

  • Besvarelse / afslutning af opkald: Press the multi-function button on the in-line remote once to answer an incoming call. Press it again to end an active call.
  • Afvisning af opkald: Tryk og hold multifunktionsknappen nede i cirka 2 sekunder for at afvise et indgående opkald.
  • Afspilning/pause af musik: Press the multi-function button once to play or pause music playback.
The in-line remote with microphone on the ZEBRONICS Zeb-Bro earphones, illustrating its call function capability.

Figure 5: In-line Microphone and Control Button

Opretholdelse

Proper care and maintenance will extend the lifespan of your earphones.

Rensning:

  • Wipe the earbuds and cable with a soft, dry, lint-free cloth.
  • Brug ikke skrappe kemikalier, rengøringsopløsningsmidler eller stærke rengøringsmidler.
  • Undgå at fugt kommer ind i åbninger.

Opbevaring:

  • Opbevar øretelefonerne et rent og tørt sted, når de ikke er i brug.
  • To prevent tangling and damage, coil the cable neatly. The flat, tangle-resistant cable design helps in this regard.
  • Undgå ekstreme temperaturer.

Fejlfinding

If you encounter issues with your Zeb-Bro earphones, refer to the following common problems and solutions.

ProblemMulig årsagLøsning
Ingen lyd eller lav lydstyrkeLoose connection, device volume too low, incorrect audio output setting on device.Ensure 3.5mm jack is fully inserted. Increase volume on your device. Check device's audio output settings.
Mikrofon virker ikkeLoose connection, device microphone settings, incompatible device.Ensure 3.5mm jack is fully inserted. Check your device's microphone privacy settings. Test with another compatible device.
LydforvrængningVolume too high, damaged cable/earbuds, audio source issue.Lower the volume. Inspect cable for damage. Try with a different audio source.

Specifikationer

Key technical specifications for the ZEBRONICS Zeb-Bro Wired Earphones:

FeatureSpecifikation
ModelnavnZEB-BRO
ForbindelsesteknologiKablet
Hovedtelefonstik3.5 mm Jack
Audio driver størrelse10 millimeter
Frekvensrespons20Hz - 20kHz
Impedans16 Ohm
StøjkontrolLydisolering
MaterialePlast
Kabellængde3.9 fod (ca. 1.2 meter)
Varens vægt14 gram (0.494 ounce)
KontroltypeMediekontrol
Kompatible enhederLaptops, Mobile Phones, Tablets, PC, All 3.5mm Jack Devices, iOS, Android, Audio Player

Garanti og support

ZEBRONICS provides a warranty for the Zeb-Bro Wired Earphones to ensure your satisfaction.

Garantioplysninger:

Dette produkt leveres med en 6 måneders garanti from the date of purchase. The warranty covers manufacturing defects. Please retain your purchase receipt as proof of purchase for warranty claims.

Kundesupport:

For any technical assistance, warranty claims, or product-related inquiries, please contact ZEBRONICS customer support through their official webwebstedet eller de kontaktoplysninger, der følger med din købsdokumentation.

For more information, visit the official ZEBRONICS webwebsted: www.zebronics.com

© 2024 ZEBRONICS. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.