TC Electronic Infinite Sample Sustainer Pedal User Manual

Indledning

The TC Electronic Infinite Sample Sustainer is a versatile guitar effects pedal designed to sample and sustain your guitar signal, creating rich, ambient pads for you to play over. It features optional layering, an infinite mode for continuous morphing layers, and integrated reverb and modulation effects. The footswitch can be configured for either latching or momentary operation, providing flexible control over your sound.

Produkt overview

Figur 1: Betjeningselementer på frontpanelet. Dette billede viser top-down view of the Infinite Sample Sustainer pedal, highlighting the Decay, Level, Fade In, and FX Type knobs, along with the Dry/Verb switch, Latch/Momentary switch, and the main footswitch. Input and output jacks are visible on the sides.

Figur 2: Vinklet View. An angled perspective of the pedal, showcasing its compact blue casing and the arrangement of its control knobs and jacks.

Figur 3: Tilslutninger på bagpanelet. This image shows the rear of the pedal, featuring the DC power input and the USB port for connectivity and firmware updates.

Figure 4: Regulatory Information. The bottom label of the pedal, displaying compliance markings, power requirements (9V === 100mA), and manufacturing details.

Opsætning

Strømtilslutning

The Infinite Sample Sustainer pedal requires a 9V DC power supply with a center-negative polarity. Ensure the power supply provides at least 100mA. Connect the power supply to the DC input jack located on the rear of the pedal.

Lydforbindelser

1. Tilslut din guitar eller et andet instrument til IN stikket på højre side af pedalen ved hjælp af et standard 6,5 mm instrumentkabel.
2. Tilslut UD stikket på venstre side af pedalen til din amplifier or the next pedal in your signal chain using another 1/4" instrument cable.
3. For advanced routing, utilize the SENDE og TILBAGE jacks to integrate external effects into the pedal's internal FX loop. This allows you to apply other effects specifically to the sustained signal.

USB-forbindelse

The USB port on the rear of the pedal is used for connecting to a computer for firmware updates and TonePrint editing. Use a standard USB cable to connect the pedal to your computer.

Betjening af pedalen

Kontrol overview

• DECAY-knap: Controls how quickly the sustained sound fades out. Turn clockwise for longer sustain.
• LEVEL knap: Adjusts the overall output volume of the sustained signal.
• FADE IN Knob: Determines the speed at which the sustained sound fades in after the footswitch is engaged.
• FX TYPE Knob: Selects between different effect types (L1, L2, L3, Infinite, TP1, TP2, TP3).
  • L1, L2, L3: Layering modes, allowing you to stack multiple sustained notes or chords.
  • Infinite: Creates an indefinite number of layers that gradually morph together, ideal for ambient textures.
• DRY/VERB Switch: Toggles between a dry sustained signal and a sustained signal with integrated reverb.
• LATCH/MOMEN Switch: Configures the footswitch behavior.
  • LÅSE: Press once to engage sustain, press again to disengage.
  • MOMEN (Momentary): Sustain is active only while the footswitch is held down.
• Fodkontakt: Engages and disengages the sustain effect based on the LATCH/MOMEN switch setting.

Grundlæggende betjening

To activate the sustain effect, play a note or chord and then press the footswitch. The pedal will capture and sustain the sound according to your settings. Experiment with the Decay, Level, and Fade In knobs to shape the sustained sound. Utilize the FX Type knob to explore different layering and infinite sustain possibilities, or load custom TonePrints for unique effects.

Opretholdelse

The TC Electronic Infinite Sample Sustainer pedal is built for durability. To ensure its longevity and optimal performance:

• Hold pedalen ren ved at tørre den af ​​med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
• Beskyt pedalen mod ekstreme temperaturer, fugtighed og direkte sollys.
• Afbryd strømmen, når den ikke er i brug i længere perioder.
• Kontrollér regelmæssigt alle kabelforbindelser for sikker fastgørelse.

Fejlfinding

Specifikationer

• Model: UENDELIG SAMPLE SUSTAINER
• Dimensioner (L x B x H): 4.8" x 2.91" x 1.97" (12.19 cm x 7.39 cm x 5.00 cm)
• Vægt: 12 ounce (340 gram)
• Strømbehov: 9V DC, center-negativ, minimum 100mA
• Hardwaregrænseflade: USB (for TonePrint and firmware updates)
• Signalformat: Analog
• Farve: Blå

Garanti og support

TC Electronic products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official TC Electronic webwebstedet eller kontakt deres kundeservice. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For the latest information and software downloads, visit: www.tcelectronic.com