1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Mean Well LPC-60-1050 60W Constant Current LED Power Supply. Please read this manual thoroughly before installation and retain it for future reference.
Nøglefunktioner:
- Constant current design for stable LED operation.
- Universal AC input / Full range (100-240VAC).
- Withstands 300VAC surge input for 5 seconds.
- Protections: Short circuit, Over voltage.
- Køling ved fri luftkonvektion.
- Fully encapsulated with IP67 level for outdoor use.
- Fully isolated plastic case.
- Class 2 power unit, no FG (Frame Ground).
- Passes LPS (Limited Power Source) requirements.
- Suitable for LED related fixtures or appliances, such as LED decoration or advertisement devices.
- 100% full load burn-in test for reliability.
- High reliability with a 2-year warranty.
2. Sikkerhedsinstruktioner
Følg altid disse sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:
- Sørg for, at input voltage er inden for det specificerede område (100-240VAC).
- Åbn ikke strømforsyningen casing. Der er ingen dele indeni, som kan serviceres af brugeren.
- Afbryd strømmen før installation eller vedligeholdelse.
- Sørg for korrekt ledningsføring og isolering for at forhindre kortslutninger.
- Install in a well-ventilated area, avoiding direct sunlight or excessive heat sources.
- This device is designed for constant current LED applications. Do not use it for other purposes.
- The IP67 rating indicates protection against dust and temporary immersion in water. However, avoid prolonged submersion.
3. Opsætning og installation
Følg disse trin for korrekt installation:
- Montering:
Mount the power supply securely in a suitable location. Refer to the mechanical specification diagram for dimensions and recommended mounting direction.
Image Description: A technical diagram showing the mechanical specifications, dimensions in millimeters, and recommended mounting direction for the Mean Well LPC-60 series power supply. It also includes a block diagram, derating curve, and static characteristics graph.
- Ledningsindgang (AC):
Connect the AC input wires to your main power source. The blue wire (ACN) is for Neutral, and the brown wire (ACL) is for Live. Ensure connections are secure and insulated.
Billedbeskrivelse: En top-down view of the Mean Well LPC-60-1050 power supply. The label clearly shows "ACN (BLUE)" and "ACL (BROWN)" for input, and "V+ (RED)" and "V- (BLACK)" for output. The model number LPC-60-1050, input voltage (100-240VAC), and output (48V 1050mA MAX) are visible.
- Ledningsudgang (DC):
Connect the DC output wires to your LED fixture. The red wire (V+) is for positive, and the black wire (V-) is for negative. Verify polarity before connecting.
Billedbeskrivelse: En vinklet view of the Mean Well LPC-60-1050 power supply, highlighting the output side with red (V+) and black (V-) wires. The product label with specifications is also visible.
- Tænd:
Once all connections are secure, apply power to the AC input. The LED fixture should illuminate.
4. Betjeningsvejledning
The LPC-60-1050 is a constant current power supply designed for specific LED applications. It operates automatically once connected to a suitable AC input and LED load.
- Konstant strømudgang: The power supply delivers a stable 1050mA constant current output, suitable for LED strings or arrays designed for this current.
- Belastningskompatibilitet: Ensure your LED load's forward voltage falls within the operating voltage range of the power supply to prevent damage.
- Miljøforhold: Operate within the specified ambient temperature range. Refer to the derating curve in the specifications for performance at different temperatures.
5. Vedligeholdelse
The Mean Well LPC-60-1050 is designed for low maintenance. However, periodic checks are recommended:
- Rensning: Keep the exterior of the power supply clean and free from dust and debris to ensure proper heat dissipation. Use a soft, dry cloth.
- Tilslutningstjek: Kontrollér regelmæssigt alle ledningsforbindelser for tæthed og tegn på korrosion eller beskadigelse.
- Miljøinspektion: Ensure the installation environment remains within specified conditions (temperature, humidity).
- Ingen dele, der kan serviceres af brugeren: Do not attempt to open or repair the unit. Doing so will void the warranty and may pose a safety risk.
6. Fejlfinding
If the LED power supply is not functioning correctly, consider the following:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen LED-belysning | Ingen AC-indgangsstrøm | Kontroller strømkilde og forbindelser. |
| Ingen LED-belysning | Incorrect wiring (input/output) | Verify AC input (blue/brown) and DC output (red/black) connections and polarity. |
| Ingen LED-belysning | Short circuit or over voltage beskyttelse aktiveret | Disconnect power, inspect LED load and wiring for shorts or overvoltage conditions. Correct the issue and reapply power. |
| LED'er flimrer eller dæmpes | Unstable AC input or faulty LED load | Check AC input stability. Test with a known good LED load. |
| Enheden føles overdrevent varm | Insufficient ventilation or ambient temperature too high | Ensure adequate airflow around the unit. Relocate to a cooler environment if necessary. Refer to derating curve. |
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Model | LPC-60-1050 |
| Input bindtage | 100-240VAC (Universal AC input / Full range) |
| Udgangsstrøm | 1050mA (Constant Current) |
| Udgangseffekt | 60 W (maksimum) |
| Udgang Voltage | +48V (Maximum, at 1050mA) |
| Beskyttelser | Short circuit, Over voltage |
| Køling | Fri luftkonvektion |
| IP-vurdering | IP67 (Fully encapsulated) |
| Sikkerhedsstandarder | Class 2 power unit, Pass LPS |
| Dimensioner (L x B x H) | 6.42 x 1.69 x 1.26 tommer (ca. 163 x 43 x 32 mm) |
| Vægt | Approx. 0.47 lbs (0.21 kg) per unit (Total 6.2 lbs for 6 units) |
| Driftstemperatur | Refer to Derating Curve in Mechanical Specification |
| UPC | 761312703453 |
Note: Specifications are subject to change without notice. Refer to the official Mean Well datasheet for the most current information.
8. Garanti og support
The Mean Well LPC-60-1050 power supply comes with a 2 års garanti fra købsdatoen, dækker defekter i materialer og udførelse ved normal brug.
Garanti undtagelser:
- Skader forårsaget af forkert installation eller betjening.
- Skader som følge af uautoriserede ændringer eller reparationer.
- Damage from environmental conditions outside specified limits.
- Almindelig slitage.
For warranty claims or technical support, please contact your original point of purchase or the manufacturer's authorized service center. Please have your purchase receipt and product model number ready.