Brizled Red & Green 240 LED Outdoor Christmas Lights Instruction Manual

1. Produktet er slutview

The Brizled Red & Green 240 LED Christmas Lights are designed for both indoor and outdoor decorative lighting. This string light set features 240 red and green LEDs across a 78.74ft length, offering multiple lighting modes, a timer function, and memory capabilities. The lights are connectable, allowing for extended coverage.

Image 1: Coiled Brizled Red & Green 240 LED Christmas Lights with power adapter.

2. Sikkerhedsoplysninger

• This product is ETL certified and operates at a low voltage of 29V, ensuring human body safety.
• The LED string lights are IP44 waterproof, suitable for outdoor use. However, the power adapter is NOT waterproof and must be protected from water.
• Do not connect more than 3 strands (maximum 720 LEDs, 236.22ft) end-to-end to avoid overloading.
• Ensure proper installation to prevent damage to the wires or bulbs.

3. Opsætning

3.1 Udpakning og placering

Carefully uncoil the string lights. The flexible design allows for various placements, such as wrapping around trees, outlining windows, or decorating patios.

3.2 Forbindelse af flere tråde

Each strand features male and female safe plugs for end-to-end connection. To extend the length, align the male plug of one strand with the female plug of another and securely connect them. You can connect up to a maximum of 3 strands (totaling 720 LEDs and 236.22ft).

Image 2: Illustration of connecting multiple light strands.

3.3 Strømtilslutning

Plug the power adapter into a standard electrical outlet. Remember to protect the adapter from water if using outdoors.

Image 3: Brizled lights are waterproof, but the adapter needs protection.

4. Betjeningsvejledning

4.1 Ændring af lystilstande

The lights feature 8 distinct lighting modes. To cycle through these modes, press the round button located on the power adapter. The available modes are:

1. Kombination
2. I bølger
3. Sekventiel
4. Langsom glød
5. Chasing/Blitz
6. Langsom fade
7. Blink/Blitz
8. Bliv ved

Image 4: The control button on the adapter allows cycling through 8 lighting modes.

4.2 Hukommelsesfunktion

A built-in memory chip ensures that the lights will retain your last selected lighting mode even after being powered off and on again. There is no need to reset your preferred mode daily.

Image 5: The memory function retains your last selected lighting mode.

4.3 Timer funktion

The lights include a timer function set for 6 hours on and 18 hours off. To activate the timer, long-press the round button on the adapter until a green light illuminates. To deactivate the timer, long-press the button again until the green light turns off.

Image 6: Instructions for activating and deactivating the timer function.

5. Vedligeholdelse

• Regularly inspect the light string for any damage to the wire insulation or bulbs.
• Clean the lights gently with a soft, dry cloth if necessary. Do not use harsh chemicals or abrasive materials.
• When storing, carefully coil the lights to prevent tangling and damage. Store in a cool, dry place away from direct sunlight.

6. Fejlfinding

• Lysene tændes ikke: Ensure the power adapter is securely plugged into a working outlet. Check for any visible damage to the cord or adapter.
• Nogle lys virker ikke: LED lights are generally durable. If individual bulbs are out, it typically does not affect the rest of the string. Check for loose connections if a section is out.
• Timeren virker ikke: Ensure the timer function was activated correctly by long-pressing the button until the green light appeared.

7. Specifikationer

8. Garanti og support

For warranty information or technical support, please refer to the product packaging or contact Brizled customer service directly. Contact details can typically be found on the manufacturer's official webwebstedet eller gennem dit købssted.