Lunderg Wireless Early-Alert Bed and Chair Alarm System

Velkomst

This manual provides comprehensive instructions for the Lunderg Wireless Early-Alert Bed and Chair Alarm System. This system is designed to assist caregivers in preventing falls for elderly adults and individuals with dementia by providing timely alerts when a person attempts to leave their bed or chair.

Vigtige sikkerhedsoplysninger

• This device is intended as an aid for fall prevention and does not replace direct supervision.
• Ensure all components are installed correctly and functioning before relying on the system.
• Keep the pager within hearing range at all times.
• Regularly check battery levels and replace them as needed to ensure continuous operation.
• Do not immerse sensor pads in liquid. Clean with a damp klæde.
• Opbevares utilgængeligt for børn.
• Udtalelser vedrørende kosttilskud er ikke blevet evalueret af FDA og er ikke beregnet til at diagnosticere, behandle, helbrede eller forebygge nogen sygdom eller sundhedstilstand.

Pakkens indhold

Bekræft, at alle følgende varer er inkluderet i din pakke:

• 1 x Wireless Pager/Monitor
• 1 x Bed Sensor Pad (10 x 33 inches)
• 1 x Chair Sensor Pad (10 x 15 inches)
• 1 x vægbeslag
• 4 x Bed Clips
• 4 x Remme
• 2 x AA Batteries (for pager)
• 1 x brugermanual

Beskrivelse: This detailed diagram outlines all the components included in the Lunderg Bed and Chair Alarm Set, including the bed sensor pad (10x33 inches), chair sensor pad (10x15 inches), monitor (pager), wall mount bracket, AA batteries, bed clips, and bands. It also shows the location of the user manual.

Produkt overview

Wireless Pager/Monitor

The pager is the central unit that receives signals from the sensor pads and emits an alarm. It features:

• Statusindikatorer: Lights to show connection and alarm status.
• Lydstyrke knap: Adjusts alarm volume (High, Low, Vibration Only).
• Par -knap: Used to connect sensor pads to the pager.
• Stop-knap: Dæmper alarmen.
• Tænd/sluk-knap: Placeret på siden.
• Lommeklemme: For bærbarhed.

Sengesensorpude

The bed sensor pad is placed under the mattress or fitted sheet to detect movement. Key features include:

• Dimensions: 10 x 33 inches.
• Early-Alert Zone: Designed to detect the process of standing up.
• Low False Alarm Zone: Helps reduce nuisance alarms.
• Incontinence resistant and easy to wipe clean.

Stolesensorpude

The chair sensor pad is placed on a chair, wheelchair, or recliner seat. Key features include:

• Dimensions: 10 x 15 inches.
• Triggers immediately after the patient stands up.
• Incontinence resistant and easy to wipe clean.

Beskrivelse: This diagram illustrates the Lunderg Bed Alarm and Chair Alarm system in action. The bed sensor pad is placed under a patient in bed, and the chair sensor pad is under a patient in a chair, both wirelessly connected to the central pager unit.

Opsætningsinstruktioner

1. Pager Battery Installation

1. Locate the battery compartment on the back of the pager.
2. Open the compartment and insert the two AA batteries, ensuring correct polarity (+/-).
3. Luk batterirummet forsvarligt.
4. Turn the pager ON using the side switch.

2. Bed Sensor Pad Placement and Securing

1. Place the bed sensor pad directly on the mattress, under the fitted sheet. Ensure the side labeled "THIS SIDE MUST FACE UP" is visible.
2. Position the pad so that the patient's torso will be centered over the pad when they are lying in bed. The end of the pad with the cable should hang slightly off the edge of the bed.
3. Use the provided bed clips and bands to secure the pad to the mattress. This prevents shifting and helps reduce false alarms.
4. For King or Queen beds, use the 'TX-only' setting on the pad. For Twin size beds, use 'Both-sides' if applicable (refer to pad markings).

Beskrivelse: This image demonstrates the correct installation of the Lunderg bed sensor pad. It shows the pad secured to the mattress with anti-slip stickers and bands, then covered by a fitted sheet, which is crucial for preventing false alarms due to shifting or repositioning.

3. Chair Sensor Pad Placement

1. Place the chair sensor pad on the seat of the chair, wheelchair, or recliner. Ensure the side labeled "THIS SIDE MUST FACE UP" is visible.
2. Position the pad so that the patient's weight will be directly on the pad when seated.

Beskrivelse: This image depicts an elderly man in the process of standing up from a couch, with the Lunderg chair sensor pad positioned on the seat cushion. This illustrates the use of the chair alarm system for fall prevention.

4. Pairing Sensor Pads with Pager

The bed and chair sensor pads connect wirelessly to the pager. Follow the instructions provided with your specific sensor pads for pairing. Generally, this involves:

1. Ensure the pager is turned on and within range of the sensor pad.
2. Press and hold the 'PAIR' button on the pager until the indicator light flashes.
3. Activate the sensor pad (e.g., by pressing a button on the pad's transmitter or by applying/releasing pressure).
4. The pager will indicate successful pairing (e.g., a solid light or beep).
5. Repeat for the second sensor pad if using both bed and chair alarms.

For detailed video guides on setup, please visit: lunderg.com/videoguide (general guide) and lunderg.com/chairvideo (chair alarm specific).

Betjening af systemet

Understanding Alarm Triggers

• Bed Alarm: The Early-Alert system detects the process of standing up, notifying you before the individual is fully out of bed.
• Chair Alarm: The system notifies you immediately after the patient stands up from the chair.

Adjusting Pager Settings

The pager offers adjustable settings to suit your environment:

• Bind: Press the 'VOLUME' button to cycle through High, Low, or Vibration Only modes.
• Choose the setting that ensures you are alerted effectively, whether during the day or to wake you from sleep.

Beskrivelse: This image shows the compact Lunderg wireless pager placed on a side table next to a person on a couch, demonstrating its portability. It also highlights that the pager can be mounted on a wall using the included bracket.

Reaktion på en alarm

When an alarm sounds or vibrates, immediately check on the individual to provide assistance and prevent falls. Press the 'STOP' button on the pager to silence the alarm.

Forebyggelse af falske alarmer

• Ensure the bed pad is securely fastened to the mattress using the provided clips and bands.
• Place the bed pad under a fitted sheet to prevent movement.
• Verify the patient is centered on the pad, not on the very edge.
• When making the bed, ensure the pad has not shifted from its correct position.

Pleje og vedligeholdelse

• Cleaning Sensor Pads: The sensor pads are incontinence resistant and can be wiped clean with a damp klud og mildt rengøringsmiddel. Må ikke nedsænkes i vand.
• Pager Battery Replacement: Replace the AA batteries in the pager when the low battery indicator appears or if the pager's performance diminishes.
• Sensor Pad Lifespan: The chair pads have an estimated lifespan of 15 months. Replace sensor pads as needed to ensure optimal performance.

Fejlfinding

Produktspecifikationer

• Modelnummer: UPC-LUN-CHAIR-BEDALARM
• Bed Sensor Pad Dimensions: 10 x 33 tommer
• Chair Sensor Pad Dimensions: 10 x 15 tommer
• Pager Power Source: 2 x AA -batterier (medfølger)
• Batteritype: Alkalisk
• Fabrikant: Lunderg
• Produktmål (emballeret): 1.99 x 27.17 x 9.06 tommer; 2 pund

Garanti og support

For warranty information and customer support, please refer to the contact details provided with your product packaging or visit the official Lunderg website. It is important to note that warranty terms may vary based on the point of purchase.

For additional assistance and video tutorials, please visit: lunderg.com/videoguide og lunderg.com/chairvideo.