PEMP PP-5823-11

PEMP Ultra-Thin 12.3-inch Display User Manual

For BMW 5 Series E60 CCC (2005-2010) - CarPlay, Android Auto, Mirror Link Head Unit

1. Introduktion

This manual provides detailed instructions for the installation, operation, and troubleshooting of your PEMP Ultra-Thin 12.3-inch Display Head Unit. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Sikkerhedsoplysninger

  • Sluk: Ensure the vehicle's power is completely off before beginning any installation or wiring procedures.
  • Professionel installation: If you are unsure about any part of the installation process, it is recommended to seek professional assistance.
  • Kabelstyring: Secure all cables to prevent interference with vehicle operation or damage.
  • Kompatibilitet: This unit is specifically designed for BMW 2005-2010 E60 3 Series vehicles with the CCC Original 10 PIN LVDS system. Verify your vehicle's compatibility before installation.

3. Kompatibilitet

This PEMP Ultra-Thin 12.3-inch Display Head Unit is compatible with:

  • Køretøjsmodeller: BMW 5-serie E60 (2005-2010)
  • Original System: CCC Original 10 PIN LVDS system.

Vigtig: Please confirm your OEM display has the Aux Audio Menu. If not, an activator (ASIN: B08XXF2T5Q) may be required to activate Aux Audio first.

Image showing compatible 10 PIN CCC UI and incompatible 4 PIN CIC UI for BMW E60
Figure 3.1: Applicable Models - Confirm your vehicle has the 10 PIN CCC UI, not the 4 PIN CIC UI.

4. Produktfunktioner

  • Ultratyndt design: 12.3-inch large display with an 82.3% screen-to-body ratio, metal material shell, and Non-Airgap process for realistic picture quality.
  • Forbindelse: Supports Wired and Wireless CarPlay and Android Auto.
  • Operativsystem: Linux System for quick boot-up and fast access to CarPlay/Android Auto interface.
  • OEM-integration: Supports factory monitor information display. Long press the Menu button to switch between the factory OEM interface and the CarPlay interface.
  • Kontrolelementer: Supports steering wheel button functions.
  • Displaykvalitet: Multi-Point Capacitive Touch Screen, 12.3-inch HD IPS Display Screen with a resolution of 1920 x 720.
  • Kamerasupport: Supports the car's reversing camera and radar information display. Compatible with OEM cameras and aftermarket cameras (720P or less). Provides clear reversing picture.
Image showing wireless CarPlay, Android Auto, Mirror Link, 82.3% screen-to-body ratio, 1920x720 resolution, and 12.3 inch display.
Figure 4.1: Key features including wireless connectivity and display specifications.
eksploderede view of the ultra-thin screen showing metallic silver trim, full-lamination screen, 2.5D curved screen, pure aluminum hardware shell, CPU, and V-shaped heat sink.
Figure 4.2: Internal components and design of the ultra-thin display.
Video 4.1: A demonstration of the ultra-thin screen's design and functionality.

5. Opsætnings- og installationsvejledning

Sikkerhed først: Ensure your car is completely powered off before starting installation.

5.1. Generel installation overview

Before and after installation comparison of the car's dashboard with the new 12.3-inch display.
Figure 5.1: Visual comparison of the car's interior before and after installing the PEMP display.
Product comparison showing an old style non-centered display versus the new PEMP style centered design.
Figure 5.2: Product comparison highlighting the centered design of the PEMP display.

5.2. Tilslutning af fiberoptisk kabel

If your OEM ISO harness includes a fiber optic cable, it must be adapted to the PEMP ISO harness for proper functionality.

Diagram showing how to transfer the 2P green optical fiber cable from the original CD unit to the Linux harness.
Figure 5.3: Diagram for connecting the fiber optic cable.
Video 5.1: Detailed instructions on how to connect the fiber optic cable and address potential sound issues.

5.3. Kablet CarPlay og Android Auto-forbindelse

For wired CarPlay and Android Auto, ensure your device is connected to USB IN 1.

Diagram showing USB IN 1 and USB IN 2 connections, indicating USB IN 1 for wired CarPlay and Android Auto.
Figure 5.4: Connect wired CarPlay/Android Auto to USB IN 1.

6. Betjeningsvejledning

6.1. Switching Between OEM and New System

You can easily switch between your original BMW interface and the PEMP display's interface by long-pressing the Menu button on your iDrive controller.

Image showing the ability to switch between OEM car information and the new system's CarPlay/Android Auto interface.
Figur 6.1: Problemfri skift mellem OEM- og nye systemgrænseflader.

6.2. Kameraindstillinger

The unit supports both OEM and aftermarket front and rear view cameras. You can select the camera type in the settings menu.

  1. Gå til Opsætning.
  2. Vælge Bilindstillinger.
  3. Vælge Omvendte indstillinger.
  4. Vælge Kamera type (Original Camera or Aftermarket Camera).
Image showing support for OEM and aftermarket front and rear view cameras, with settings for camera type and format.
Figure 6.2: Camera settings interface and visual representation of camera support.
Screenshot of the camera type selection menu within the settings.
Figure 6.3: Camera Type selection in settings.

7. Fejlfinding

7.1. No Sound Issue

If you experience no sound from the display, follow these steps:

  1. Check OEM Audio: Tryk på FM/AM-knappen på din originale radio for at bekræfte, om OEM-radioen har lyd.
  2. Bluetooth afbrydelse: If the OEM radio has sound, go to Indstillinger > System on the PEMP unit. Turn off "Use Car's BT Channel". Then, disconnect the original Bluetooth from your phone's settings.
  3. AUX Feature: After disconnecting Bluetooth, go to the car's settings and select "Auto Switch to AUX" feature off.
  4. Juster lydstyrken: Go back to the original car interface, select AUX Front. If there is still no sound, adjust the volume knob on your car's radio.
  5. AUX Harness: If there is still no sound, you may need to connect the AUX harness. This involves connecting the provided AUX cable from the PEMP unit to your car's AUX-IN port, usually found in the center console.
  6. ISO Harness Check: Ensure the ISO harness is securely plugged in. If it feels loose, unplug and re-plug it firmly.
  7. Power/LVDS Cables: Check that the power cable and LVDS cables on the back of the PEMP machine are not loose. Re-plug them if necessary.
Diagram showing automatic and manual AUX setting methods, including navigating through car settings and long-pressing button 8.
Figure 7.1: Automatic and manual AUX setting methods.
Troubleshooting guide for 'Why can't hear the sound' with steps to check AUX audio menu and use an E60 AUX activator.
Figure 7.2: Troubleshooting steps for no AUX audio menu, suggesting an activator.
Video 7.1: A video guide on how to fix the no sound issue, including checking OEM Bluetooth and AUX connections.

7.2. Splash Screen / OEM Resolution Issues

If your screen displays a splash screen or distorted image, adjust the resolution:

  1. Gå til Settings > Car Settings.
  2. Vælge Original bils skærmopløsning.
  3. Slide through the options to find your car's suitable resolution.
  4. Select the correct resolution and return to the original car interface. The display should now be normal.
Screenshot of the screen resolution settings menu.
Figure 7.3: Screen Resolution Adjustment in settings.
Video 7.2: A video guide on how to resolve OEM resolution issues, including adjusting screen resolution settings.

8. Specifikationer

FeatureSpecifikation
ModelnummerPP-5823-11
Skærmstørrelse12.3 tommer
Skærmopløsning1920x720
OperativsystemLinux
ForbindelsesteknologiBluetooth
Særlige funktionerBluetooth, Touchscreen, Built-in CarPlay and Android Auto
LydudgangstilstandAUX
Varens vægt7.33 pund
Produktdimensioner12.99 x 5.12 x 1.06 tommer

9. Garanti og support

For warranty information, technical support, or any inquiries regarding your PEMP product, please refer to the contact information provided with your purchase or visit the official PEMP webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Du kan også besøge PEMP-butik på Amazon for yderligere produktinformation og supportressourcer.

© 2024 PEMP. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.