Teamgee H3 DIY Electric Skateboard Kit Instruction Manual

1. Introduktion

Thank you for choosing the Teamgee H3 DIY Electric Skateboard Kit. This kit is designed to transform your standard skateboard into a powerful electric skateboard, offering an exciting and convenient riding experience. The H3 kit features a 480W motor, a top speed of 16 MPH, a range of up to 9.3 miles, and four adjustable speed modes to suit various riding preferences and skill levels. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

Image: The Teamgee H3 DIY Electric Skateboard Kit seamlessly integrated onto a skateboard deck, showcasing its compact design and readiness for electric propulsion.

2. Vigtige sikkerhedsadvarsler

Riding an electric skateboard carries inherent risks. To minimize these risks and ensure your safety, please adhere to the following guidelines:

• Always wear a helmet and appropriate protective gear, including knee pads, elbow pads, and wrist guards.
• Familiarize yourself with and obey all local traffic laws and regulations regarding electric skateboards.
• Do not ride in wet conditions, on slippery surfaces, or on uneven terrain.
• Sørg for, at batteriet er tilstrækkeligt opladet før hver tur.
• Perform a pre-ride inspection: check all connections, ensure wheels are securely attached, and verify brake functionality.
• Ride within your skill level and be aware of your surroundings. Avoid riding in heavy traffic or crowded areas.
• Do not attempt to modify the kit or its components, as this may compromise safety and void the warranty.
• The maximum load capacity is 160 pounds. Do not exceed this limit.

3. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• Teamgee H3 Electric Skateboard Module (with integrated motor wheel and battery enclosure)
• Front Truck Assembly with Wheels
• Trådløs fjernbetjening
• Strømadapter (oplader)
• Ladekabel
• Skateboard T-Tool
• Brugervejledning (dette dokument)

Billede: En komplet overview of the Teamgee H3 DIY Electric Skateboard Kit components, laid out for easy identification.

4. Opsætning og installation

The Teamgee H3 kit is designed for flexible installation on various standard skateboard decks. Follow these steps to convert your skateboard:

1. Prepare Your Skateboard Deck: Ensure your skateboard deck is clean and free from any obstructions.
2. Remove Existing Trucks: Using the provided T-tool or a suitable wrench, carefully remove both the front and rear trucks from your skateboard deck.
3. Install the Electric Module (Rear): Position the Teamgee H3 electric skateboard module at the rear of your deck, aligning the mounting holes. Secure it using the provided hardware. Note: Some installations may require drilling an additional hole for the battery pack for optimal stability.
4. Install the Front Truck: Attach the new front truck assembly to the front of your skateboard deck, aligning the mounting holes and securing it with the provided hardware.
5. Sikre alle komponenter: Double-check that all screws and nuts are tightened securely. Ensure there is no wobble or looseness in either truck assembly.
6. Indledende opladning: Before your first ride, fully charge the electric module using the provided power adapter and charging cable. The power indicator lights on the module will show the charging status.

Image: Visual guide illustrating the simple process of integrating the H3 kit with a standard skateboard deck to create an electric skateboard.

Image: The H3 kit shown on different types and sizes of skateboard decks, highlighting its universal compatibility.

5. Betjeningsvejledning

Once installed and charged, your Teamgee H3 electric skateboard is ready for use. Familiarize yourself with the remote control functions:

• Tænd/sluk: Press and hold the power button on the remote and the skateboard module to turn them on/off. Ensure they are paired before riding.
• Acceleration: Push the throttle lever forward to accelerate.
• Bremsning: Pull the throttle lever backward to engage the brakes. Apply brakes smoothly to avoid sudden stops.
• Hastighedstilstande: The remote allows you to switch between four speed modes:
• Beginner (L): 5-10 km/h (3-6 MPH) - Ideal for new riders.
• Progressive (M): 10-15 km/h (6-9 MPH) - For intermediate riders.
• High-speed (H): 15-25 km/h (9-16 MPH) - For experienced riders.
• Sport Mode (H+): 15-25 km/h (9-16 MPH) - Provides maximum torque and responsiveness.
• Frem/tilbage: Use the designated switch on the remote to change direction.
• Batteriindikator: The remote control features a battery indicator to show the remaining charge of both the remote and the skateboard module.

Billede: Detaljeret view of the remote control, highlighting its various functions including speed adjustment, acceleration, braking, and battery indicators.

6. Vedligeholdelse

Regular maintenance will extend the lifespan of your Teamgee H3 kit:

• Batteripleje: Charge the battery regularly, even if not in use, to maintain its health. Avoid completely draining the battery or overcharging it. Store in a cool, dry place.
• Rensning: Wipe down the electric module and wheels with a damp klud efter brug. Undgå at bruge skrappe kemikalier eller for meget vand.
• Hjul- og lejeinspektion: Periodically check the wheels for wear and tear. Inspect bearings for smooth rotation and clean or replace them if necessary.
• Spænd hardware: Regularly check and tighten all screws and nuts on the trucks and module to ensure they remain secure.

7. Fejlfinding

If you encounter issues with your Teamgee H3 kit, refer to the following common problems and solutions:

If the issue persists after attempting these solutions, please contact Teamgee customer support for further assistance.

8. Specifikationer

Key technical specifications for the Teamgee H3 DIY Electric Skateboard Kit:

• Motoreffekt: 480W DC Brushless Motor
• Tophastighed: Op til 25 km/t
• Maks. Rækkevidde: Op til 15 km
• Batteri: 36V, 2.6Ah, 93.6Wh High Energy Power Cells
• Opladningstid: 1-2 timer
• Max belastningskapacitet: 160 pund
• Klatrevinkel: Op til 15 %
• Hjulstørrelse: 90 mm
• Hjul materiale: Highly Flexible Polyurethane (PU)
• Truck Material: 6.5" High Strength Aluminium-Magnesium Alloy
• Lejer: HCH 608RS ABEC-11
• Varens vægt: 9.9 Pounds (kit only)

Billede: En detaljeret view of the powerful 480W DC Brushless Motor, highlighting its robust design and 15% climbing angle capability.

Billede: En eksploderet view of the H3 module, detailing its internal components such as the PU driven wheels, aluminum-magnesium alloy trucks, switching key, charging port, and power indicator.

9. Garanti og support

For information regarding the product warranty, returns, or technical support, please refer to the official Teamgee webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Webwebsted: www.teamgee.com

E-mail: support@teamgee.com