Vigtige sikkerhedsoplysninger
Read all instructions carefully before beginning installation. Failure to follow these instructions could result in electric shock, fire, or personal injury. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Afbryd altid strømmen ved hovedafbryderen før installation eller service.
- Sørg for, at alle elektriske tilslutninger er udført i overensstemmelse med lokale forskrifter og bestemmelser.
- Mounting structure must be capable of supporting the fan's weight (approximately 19.4 lbs).
- Brug ikke ventilatoren med beskadigede vinger eller kabinet.
- Denne ventilator er kun designet til indendørs brug.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes.
- Loftventilator motorhus
- 5 vendbare ventilatorblade
- Blade Arms with Captive Screws
- Light Kit Assembly (4 Frosted Polypropylene Shades)
- 4 Dimmable ENERGY STAR LED Light Bulbs (8.5W, 3000K, 90CRI)
- Nedstang og baldakin
- Monteringshardware
- Installationsark
Image: Cover of the AirPro Ceiling Fan Installation Manual, showing an illustration of the fan.
Opsætning og installation
Dette afsnit giver en overview of the installation process. Refer to the included detailed installation sheet for complete step-by-step instructions.
Monteringsmuligheder
The fan can be installed on either a flat ceiling or a sloped ceiling. Ensure the electrical box is securely mounted and rated for ceiling fan support.
Knivsamling
The fan features 5 reversible blades, offering a choice between a smooth black finish and a rustic charcoal finish. Attach the blades to the blade arms using the provided captive screws, which simplify the assembly process.
Billede: Et nærbillede view of a fan blade, showing Side A with a black finish and Side B with a rustic charcoal finish, highlighting the reversible design.
Installation af lyssæt
The light kit includes four frosted polypropylene shades and four LED bulbs. Install the light kit to the fan motor housing according to the detailed instructions in the manual. Ensure bulbs are securely seated.
Image: A collage of four close-up images showing different angles of the fan's motor housing, light kit, and pull chains, illustrating component details.
Image: A collage of four detailed images showing the fan blades in both black and rustic charcoal finishes, along with close-ups of the light kit and motor housing.
Betjeningsvejledning
Blæserhastighedskontrol
The fan speed is controlled by a pull chain. Pull the chain repeatedly to cycle through the three available fan speed settings (High, Medium, Low) and Off.
Let drift
The integrated light kit is operated by a separate pull chain. Pull the chain to turn the lights On or Off. The included LED bulbs are dimmable; however, an accessory wall or remote control (sold separately) is required for dimming functionality.
Reversible Blade Function
To change the direction of airflow for seasonal comfort, locate the reverse switch on the fan motor housing. In warm weather, set the switch to circulate air downward, creating a cooling effect. In cool weather, set the switch to circulate air upward, redistributing warm air without creating a draft.
Opretholdelse
Rensning
For at rengøre ventilatoren skal du tørre den af med en blød klud.amp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components. Ensure power is disconnected before cleaning.
Udskiftning af pære
The fan uses 8.5-Watt LED bulbs. When replacing bulbs, ensure the power is off and allow bulbs to cool. Use only LED bulbs of the same wattage and base type to maintain optimal performance and energy efficiency.
Fejlfinding
If you experience issues with your ceiling fan, consult the following common troubleshooting steps:
- Ventilatoren starter ikke: Kontroller afbryderen og vægafbryderen. Sørg for, at alle ledningsforbindelser er sikre.
- Lights Do Not Work: Verify bulbs are correctly installed and not loose. Check the light pull chain. Ensure power is supplied to the light kit.
- Overdreven vaklen: Ensure all blade screws are tightened. Check that the fan is securely mounted to the ceiling junction box. Balance kit may be required (not included).
- Støjende drift: Confirm all screws are tight. Check for any loose parts or obstructions.
Hvis problemerne fortsætter efter at have forsøgt disse trin, skal du kontakte kundesupport.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | P250081-31M-WB |
| Mærke | Fremskridtsbelysning |
| Produktdimensioner | 52" D x 52" B x 18.7" H |
| Varens vægt | 19.4 pund |
| Farve | Matte Black / Frosted |
| Elektrisk ventilator design | Loft Fan |
| Strømkilde | Elektrisk med ledning |
| Voltage | 120 volt |
| Switch Type | Træk kæde |
| Kontrolmetode | Remote (accessory, sold separately) |
| Antal blade | 5 |
| Muligheder for klingefinish | Black, Rustic Charcoal (Reversible) |
| Lyssæt | 4 Frosted Polypropylene Shades |
| Pære type | LED (4 x 8.5W, 3000K, 90CRI) |
| Luftmængde kapacitet | 3330 kubikfod i minuttet |
| Effektivitet | ENERGY STAR rated, maximum efficiency |
| Indendørs/Udendørs brug | Indendørs |
| Certificeringer | UL Listed, Title 24 JA8 rated |
Image: Diagram illustrating the dimensions of the ceiling fan, showing a 52-inch diameter and 18.7-inch height.
Image: A detailed product specification sheet for the AirPro Builder Fan, model P250081-31M-WB, listing performance data, dimensions, and certifications.
Garantioplysninger
This Progress Lighting AirPro ceiling fan is covered by a 30 års begrænset garanti. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Progress Lighting webwebsted.
Kundesupport
For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer support. Refer to the contact information provided in your product packaging or on the official Progress Lighting webwebsted.