SENA Parani M10 Bluetooth Motorcycle Headset User Manual

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Pakkens indhold

The Parani M10 package typically includes the following components:

• Parani M10 Main Unit
• Kablet bommikrofon
• Højttalere (par)
• Hjelm Clamp Kit
• USB opladningskabel
• Højttalerpuder
• Krog og løkkebefæstelser til højttalere
• Brugervejledning (dette dokument)

Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.

3. Produktet er slutview

Familiarize yourself with the main unit's components and controls.

Figure 3.1: Parani M10 Main Unit Controls and Ports.

• Jog Dial: Used for volume control, menu navigation, and various functions.
• Multifunktionsknap: Primary button for power, pairing, and call management.
• LCD-skærm: Shows battery status, volume level, intercom pairing status, and other operational information.
• DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
• Speakers and Microphone Port: Connection point for the wired speakers and microphone.

4. Opsætning og installation

The Parani M10 is designed for easy installation on most motorcycle helmets.

4.1 Attaching the Main Unit to the Helmet

1. Vælg et passende sted på venstre side af din hjelm til clamp sæt.
2. Løsn skruerne på hjelmkl.amp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
3. Slide the Parani M10 main unit onto the clamp indtil den klikker på plads.

Figure 4.1: Parani M10 unit installed on a helmet.

4.2 Installation af højttalere og mikrofon

1. Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
2. Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
3. Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
4. Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
5. Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.

4.3 Opladning af enheden

Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.

5. Betjeningsvejledning

5.1 Tænd/sluk

• Tænd: Tryk og hold multifunktionsknappen nede i 1 sekund.
• Sluk: Tryk og hold multifunktionsknappen nede i 5 sekunder.

5.2 Lydstyrkekontrol

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.

Figure 5.1: LCD display showing pairing status and volume.

5.3 Smartphone-parring

1. With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
2. Gå til Bluetooth-indstillinger på din smartphone, og søg efter nye enheder.
3. Select "Parani M10" from the list of available devices.
4. Once paired, the LED will flash blue, and the LCD will confirm connection.
5. You can now listen to music, GPS navigation, and make/receive phone calls through your headset.

5.4 Bluetooth -intercom

The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.

1. Pairing Intercom:
   • Ensure both M10 units are powered on.
   • On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
   • On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
   • The units will automatically search and pair. Once paired, the LED will flash blue.
   • Repeat this process for additional units (up to four total).
2. Starting/Ending Intercom Conversation:
   • To start an intercom conversation, tap the Jog Dial.
   • To end an intercom conversation, tap the Jog Dial again.

5.5 Telefonopkald

• Besvar opkald: Tryk på multifunktionsknappen.
• Afslut opkald: Tryk på multifunktionsknappen.
• Afvis opkald: Tryk og hold multifunktionsknappen nede i 2 sekunder.
• Stemmeopkald: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).

6. Vedligeholdelse

6.1 Rengøring

Tør hovedenheden af ​​med en blød, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.

6.2 Pleje af batterier

• Oplad enheden regelmæssigt, selvom den ikke er i brug, for at opretholde batteriets sundhedstilstand.
• Undgå at opbevare enheden i ekstreme temperaturer.
• Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.

6.3 firmwareopdateringer

Kontroller Sena regelmæssigt website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.

7. Fejlfinding

7.1 Fabriksindstilling

If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.

8. Specifikationer

Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.

9. Garanti og support

9.1 Garantioplysninger

Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webwebstedet eller garantikortet, der fulgte med dit produkt. Gem din købsbevis til garantikrav.

9.2 Kundesupport

For teknisk assistance, fejlfinding eller generelle forespørgsler, besøg venligst den officielle Sena website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.

• Sena Webwebsted: www.sena.com
• Parani Webwebsted: www.parani.com