Indledning
The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.
Pakkens indhold
Please verify that all items are present in your Keychron K6 Pro package:
- 1x Fuldt samlet tastatur
- 1x Type-A til Type-C kabel
- 1x Mac and Windows Keycaps Set
- 1x Keycap aftrækker
- 1x Aftrækker
- 1x Hex-nøgle
- 1x Screwdriver (located at the bottom of the box)
Opsætning
1. Tilslutning af tastaturet
K6 Pro understøtter både trådløs Bluetooth 5.1 og kablede USB-C-forbindelser.
Bluetooth-forbindelse:
- Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
- On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
- Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.
Kablet forbindelse:
- Ensure the keyboard's mode switch is set to 'Cable'.
- Tilslut tastaturet til din computer med det medfølgende USB-C-kabel.
2. Operativsystemskift
The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.
3. Opladning af tastaturet
Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.
Operation
1. Key Combinations (Fn Keys)
The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:
Fn1 + Keys:
Fn2 + Keys:
2. QMK/VIA-tilpasning
The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:
- Connect the keyboard to your computer via USB-C cable.
- Download and install the VIA software or access the VIA web anvendelse.
- Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.
3. Hot-swap-kontakter
The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches.
- For at fjerne en kontakt skal du bruge den medfølgende kontaktaftrækker til forsigtigt at gribe fat i kontakten og trække den opad.
- For at installere en ny kontakt skal du justere benene på den nye kontakt med hullerne på printkortet og trykke godt ned, indtil den klikker på plads. Sørg for, at benene ikke er bøjede.
4. RGB-baggrundsbelysningskontrol
The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.
Opretholdelse
1. Rengøring af tastaturet
For at rengøre dit tastatur skal du først afbryde alle strømkilder. Brug en blød, fnugfri klud, der er let tørret.ampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.
2. Udskiftning af kontakt og tastatur
As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.
Fejlfinding
- Tastatur opretter ikke forbindelse via Bluetooth: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
- Taster reagerer ikke: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
- Problemer med baggrundsbelysning: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
- QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web anvendelse.
Specifikationer
| Mærke | Keychron |
| Modelnavn | Keychron K6 Pro |
| Modelnummer | K6P-H1 |
| Forbindelsesteknologi | Bluetooth 5.1, USB-C |
| Tastaturlayout | 65% (68 keys), QWERTY |
| Mechanical Switch Model | Keychron K Pro Red (Linear) |
| Hot-swappable | Yes (3-pin and 5-pin MX mechanical switches) |
| Baggrundsbelysning | RGB |
| Programmerbarhed | QMK/VIA enabled |
| Kompatible operativsystemer | macOS, Windows, Linux |
| Strømkilde | Genopladeligt batteri |
| Materiale | Plastic enclosure, Steel plate |
| Yderligere funktioner | PCB-mounted screw-in stabilizers, Sound-absorbing foam, Silicone dampening bottom pad, Double-shot PBT Keycaps |
Garanti
The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron webwebsted eller kontakt kundesupport.
Støtte
For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron website. You can also find FAQs and community forums for additional help.
