Lunderg Early-Alert Bed Alarm Pad Instruction Manual

1. Introduktion

The Lunderg Early-Alert Bed Alarm Pad is designed to assist caregivers by providing timely alerts when an individual begins to exit their bed. This system utilizes patented Pre-Alert Smart Technology to detect the process of standing up, aiming to notify caregivers before a fall occurs. This manual provides essential information for the proper setup, operation, and maintenance of your bed alarm pad.

2. Sikkerhedsoplysninger

This product is intended as an aid for caregivers and should not replace direct supervision.
Ensure the pad is placed correctly to prevent false alarms or product malfunction. Refer to the "Setup" section for proper placement.
Keep the pad and its components away from liquids to avoid damage, although the pad is designed to be incontinence resistant.
Do not attempt to modify or repair the device. Contact customer support for assistance.
Bortskaf batterier i henhold til lokale regler.

3. Pakkens indhold

The Lunderg Early-Alert Bed Alarm Pad package includes:

1 x Lunderg Early-Alert Bed Alarm Pad (10 x 30 inches)
1 x AA-batteri (forinstalleret eller medfølger separat)

Note: A wireless pager alarm unit is NOT included with this product. It must be purchased separately or as part of a full kit to receive notifications.

4. Opsætning

Follow these steps to properly set up your Lunderg Early-Alert Bed Alarm Pad:

Batteri installation: If the AA battery is not pre-installed, open the battery compartment on the pad's connector and insert the provided AA battery, ensuring correct polarity.
Placering af pude: Place the bed sensor pad on top of a flat mattress or mattress cover. Ensure the side labeled "THIS SIDE MUST FACE UP" is visible.
Sikker placering: Position the pad below a fitted sheet. This prevents the pad from moving and helps avoid false alarms or product malfunction.
Connect to Pager (Sold Separately): If you have a Lunderg wireless pager alarm unit, follow its instructions to pair it with the bed alarm pad. The pad transmits a wireless signal to the pager.

Lunderg Early-Alert Bed Alarm Pad placed on a bed with a person sitting on it.

Image: The Lunderg Early-Alert Bed Alarm Pad positioned on a bed, ready for use. The pad should be placed under a fitted sheet.

Diagram showing the Lunderg Early-Alert Bed Alarm Pad placed under a fitted sheet on a mattress.

Image: Diagram illustrating the correct placement of the sensor pad on the mattress, beneath the fitted sheet.

5. Betjeningsvejledning

Once properly set up and paired with a Lunderg wireless pager (sold separately), the Early-Alert Bed Alarm Pad operates automatically:

Weight Detection: The pad continuously monitors the presence of weight.
Pre-Alert Smart Technology: The patented technology detects the subtle shifts and movements that indicate an individual is beginning to stand up from the bed.
Alarmaktivering: When weight is removed from the pad, or when the Pre-Alert Smart Technology detects the initial stages of standing, a signal is sent to the paired wireless pager unit. The pager will then sound an alarm or vibrate, depending on its settings.
Kontinuerlig overvågning: The system remains active as long as the pad is powered and correctly positioned.

Image showing a wireless signal transmitting from the bed alarm pad to a pager worn by a caregiver.

Image: The bed alarm pad transmits a wireless signal to a caregiver's pager when activated.

6. Vedligeholdelse

Rensning: The bed alarm pad is designed to be easy to wipe clean and is incontinence resistant. Use a damp cloth with mild soap and water. Do not submerge the pad in water or use harsh chemical cleaners.
Udskiftning af batteri: The pad requires 1 AA battery. The typical lifespan of the pad's battery is approximately 15 months. Replace the battery when the low battery indicator on your paired pager unit activates, or if the pad becomes unresponsive. Ensure the battery is inserted correctly.
Opbevaring: When not in use, store the pad flat in a cool, dry place. Avoid folding or creasing the pad excessively, as this may damage internal components.

7. Fejlfinding

Problem	Mulig årsag	Løsning
No alarm when person exits bed.	Pad not powered (dead battery). Pad not correctly paired with pager. Pad incorrectly positioned.	Udskift AA-batteriet. Refer to your pager's manual for pairing instructions. Ensure the pad is flat on the mattress, under the fitted sheet, with "THIS SIDE MUST FACE UP" visible.
False alarms or inconsistent alerts.	Pad shifting or moving. Pad creased or damaged. Interferens med trådløst signal.	Ensure the pad is securely placed under a fitted sheet to prevent movement. Inspect the pad for visible damage. If damaged, replace the pad. Move the pager closer to the bed pad or away from other electronic devices.
New battery does not resolve issue.	Forkert batteri isat. Loose wiring connection in battery holder. Pad malfunction.	Kontroller batteriets polaritet. Gently check battery holder connections. If issues persist, contact Lunderg customer support. Contact Lunderg customer support for further assistance.

8. Specifikationer

Modelnummer: UPC-LUN-SENSORPAD
Produktdimensioner: 0.1 x 33 x 10 tommer
Varens vægt: 1.26 pund (0.57 kilo)
Strømkilde: Batteridrevet
Batteritype: 1 AA battery (Alkaline, Lithium-Ion, or Lithium)
Sensorteknologi: Pre-Alert Smart Technology
Kontrolmetode: Touch (Pressure-sensitive)
Typical Lifespan: 15 måneder

9. Garanti og support

The Lunderg Early-Alert Bed Alarm Pad typically comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any questions regarding your product, please contact Lunderg customer service.

For the most up-to-date contact information, please visit the official Lunderg webwebstedet eller se emballagen på dit produkt.

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a medical device and should not be used as such.

Lunderg UPC-LUN-SENSORPAD