Gustard DDC-U18 Digital Interface User Manual

1. Introduktion

The Gustard DDC-U18 is a high-performance digital interface designed to enhance your audio experience. It features advanced technologies such as the XMOS XU216 solution, ground isolation, and precision clocking to deliver pristine audio signals. This manual provides detailed instructions for setting up, operating, and maintaining your DDC-U18.

2. Produktfunktioner

• XMOS XU216 Solution: Utilizes a 16-core XMOS XU216 chip, supporting DSD512 and PCM768K for high-resolution audio processing.
• Full Ground Isolation: Incorporates a PCB physical isolation design and 200Mbps fully isolated chip to eliminate interference from connected PCs.
• LPLD Digital Shaping Technology: Reshapes the IIS signal after isolation to minimize additive jitter.
• Advanced Clocking System: Features second-generation ultra-low noise clock synthesis technology with external 10M frequency thermostatic clock support (K2 module). The clock power supply uses LT3045 ultra-low noise LDO for superior performance (0.8 uVrms broadband noise).
• Hi-End Audio Crystals: Equipped with two Accusilicon AS338 series Hi-End level audio crystals, packaged with nitrogen gas and 100% phase noise meter QC, ensuring ultra-low jitter (as low as 38fs).
• Configurable IIS-H Output: Offers four adjustable IIS line sequences, with the Gustard line sequence as default. Users can switch modes and DSD flags.

3. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle nedenstående varer er til stede og i god stand:

• Gustard DDC-U18 Digital Interface Unit
• USB kabel
• AC strømkabel
• Brugervejledning (dette dokument)

4. Kontrol og grænseflader

Familiarize yourself with the front and rear panels of the DDC-U18:

Image: Front and rear panel overview of the Gustard DDC-U18, highlighting key controls and input/output ports.

Frontpanel:

• Skærm: Shows current status and settings.
• REF-knap: Short press to switch mode, long press to switch DSD flag.
• IIS Button: Used for IIS related settings.

Bagside:

• Digital input:
  • USB-grænseflade: USB Type-B female port, USB2.0 compatible.
  • 10M BNC Input Interface: Input impedance 50Ω, 0dBm-20dBm.
• Digital udgang:
  • COAX Coaxial Interface: Output impedance 75Ω, output level 500mVP-P@75Ω load, supports 24bit 44.1k-384k/DoP64-128.
  • AES XLR Interface: Output impedance 110 ohms, output level 2.1VP-P@110 ohms load, supports 24bit 44.1k-384k/DoP64-128.
  • OPTICAL TOSLINK Interface: Supports 24bit 44.1k-192k/DoP64.
  • WORD CLOCK INTERFACE: Output impedance 75Ω, output level 3.3-5V P-P@100kΩ load. Word clock output frequency: PCM:44.1k-768k, DSD:2.82m-22.57M.
  • IIS over HDMI Interface (non-standard HDMI): LVDS output level: PCM:32bit 44.1k-768k, DSD 2.82m-22.57m (dsd64-dsd512).
• AC strømforsyning: AC 115V/230V 50/60Hz.
• Afbryderen: Tænd/sluk-knap til enheden.
• Sikring: For electrical protection.

Image: Detailed diagram of the IIS-H configurable pinout with four modes. This is a non-standard HDMI interface.

5. Opsætning

1. Placering: Place the DDC-U18 on a stable, flat surface, away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
2. Strømtilslutning: Connect the supplied AC power cable to the power input on the rear panel of the DDC-U18 and then to a suitable wall outlet. The unit supports both 115V and 230V power supplies.
3. USB-forbindelse: Connect your computer or audio source to the USB Type-B input on the rear panel using the provided USB cable.
4. Udgangsforbindelse: Connect the DDC-U18 to your DAC (Digital-to-Analog Converter) or other audio equipment using the appropriate digital output (COAX, AES, OPTICAL, WORD CLOCK, or IIS over HDMI). Ensure the correct cable type is used for each connection.
5. Driver Installation (for PC users): For optimal performance with Windows operating systems, it is recommended to install the dedicated USB driver. This driver can typically be found on the manufacturer's official website. For macOS and Linux, drivers are usually not required.

6. Betjeningsvejledning

1. Tænd: Flip the power switch on the rear panel to the 'ON' position. The front display screen will illuminate.
2. Valg af input: The DDC-U18 automatically detects the active input. Ensure your audio source is playing.
3. IIS Configuration: If using the IIS over HDMI output, you may need to configure the IIS line sequence to match your DAC.
   • Tryk kort på REF button to switch between the four available IIS modes.
   • Tryk længe på REF button to switch the DSD flag.
   • Refer to your DAC's manual to confirm the correct decoding line sequence and adjust the DDC-U18 accordingly.
4. Lydafspilning: Start playback from your connected audio source. The DDC-U18 will process the digital signal and output it to your connected DAC.

7. Specifikationer

Billede: Intern view of the Gustard DDC-U18 highlighting key components such as the XMOS XU216 chip, K2 clock module, LT3045 regulator, and Nichicon Fine Gold capacitors.

8. Fejlfinding

9. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller aerosoler.
• Ventilation: Sørg for, at ventilationshullerne ikke er blokerede for at forhindre overophedning.
• Opbevaring: Hvis enheden skal opbevares i længere tid, skal den afbrydes fra strømforsyningen og opbevares et køligt og tørt sted.

10. Garanti og support

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact your retailer.

For technical support, troubleshooting assistance, or any other inquiries, please contact Aoshida Audio-US customer service. They offer 24-hour online service and a 30-day return policy. A one-year free repair period or more may apply depending on the brand and product.

Aoshida Service Email: service@aoshida-audio.com