Model: SPASTUDIO
This manual provides instructions for the Sharper Image SPASTUDIO Waterproof Fogless Shower Mirror with Bluetooth Speaker. This device features heated anti-fog technology, an LED ring light with adjustable brightness, and a wireless Bluetooth speaker for audio streaming. It is designed for use in shower environments and includes a magnetic mount for secure attachment and a countertop base for charging and vanity use.
Image: Contents of the Sharper Image SPASTUDIO package, including the mirror, wall mount, countertop base, and charging cable.
Before first use, fully charge the mirror. Connect the USB-C cable to the charging port on the mirror and the USB-A end to a compatible power adapter (not included). The mirror can be charged while placed on the countertop base or directly via the port. A full charge typically provides approximately 7 days of use.
Image: The SPASTUDIO mirror positioned on its countertop charging base, ready for use as a vanity mirror or for charging.
Image: The SPASTUDIO mirror securely mounted on a shower wall, demonstrating its magnetic attachment.
For use outside the shower or for charging, place the mirror onto the countertop base. The mirror will magnetically connect to the base, allowing it to stand upright for vanity use. Ensure the charging pins align if charging is desired.
Billede: En side view of the SPASTUDIO mirror resting on its countertop base, highlighting its design for non-shower use.
Press and hold the power button located on the side of the mirror to turn the device on or off. A sound indicator will confirm the action.
Image: The side of the SPASTUDIO mirror, indicating the location of the power, light, and volume control buttons.
To activate the heated anti-fog feature, press the dedicated anti-fog button (often indicated by a snowflake or steam icon). The mirror surface will warm to prevent fogging. This function clears fog in approximately 60 seconds. For best results, activate this feature at the beginning of your shower.
Press the light button (often indicated by a sun icon) to cycle through three different brightness levels for the LED ring light. Pressing it a fourth time will turn the light off.
Image: The front of the SPASTUDIO mirror with its LED ring light activated, providing illumination.
Video: Demonstrates the magnetic mount and Bluetooth speaker functionality of the Sharper Image SPASTUDIO Shower Mirror.
The mirror's magnetic mount allows for easy adjustment of the mirror's angle. Simply tilt or swivel the mirror to achieve your desired viewing stilling.
| Problem | Løsning |
|---|---|
| Mirror is fogging up. | Ensure the anti-fog function is activated. For optimal results, turn it on at the start of your shower. A splash of water can also temporarily clear the mirror. |
| Ingen lyd fra Bluetooth-højttaleren. | Check if the mirror is properly paired with your device. Ensure the volume on both the mirror and your device is turned up. Confirm that no other device is currently connected to the mirror. |
| LED-lys virker ikke. | Ensure the mirror is charged. Press the light button to cycle through brightness levels. If still not working, try turning the mirror off and on again. |
| Mirror falls from wall mount. | Ensure the wall mount was installed on a clean, dry, smooth surface and allowed to cure for 24 hours. The magnetic connection is strong, but a forceful bump can dislodge it. Re-secure the mount if necessary. |
| Loud constant beeping. | This typically indicates a low battery. Recharge the mirror fully. |
Billede: Top og bund views of the SPASTUDIO mirror, illustrating its round design and charging contact points.
ADVARSEL:
For warranty information or product support, please refer to the documentation included with your purchase or visit the official Sharper Image webwebsted. Gem din købsbevis i tilfælde af garantikrav.