AOPUTTRIVER AP-570S-APP Bluetooth-kabletamp Brugervejledning til måler

1. Introduktion

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Sikkerhedsoplysninger

Please read all safety warnings and operating instructions carefully before using this instrument. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Sørg altid for, atamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Brug ikke måleren, hvis den ser beskadiget ud, eller hvis isoleringen er kompromitteret.
• Overhold alle lokale og nationale sikkerhedsforskrifter.
• Undgå at arbejde alene.
• Vær forsigtig, når du arbejder med voltagover 30V AC RMS, 42V peak eller 60V DC. Disse voluminertages udgør en stødfare.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• The Non-Contact Voltage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Image 2.1: The clamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Produktfunktioner

• Multifunction Measurement: Accurately measures AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Temperaturmåling: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Non-Contact Voltage (NCV) Detektion: Registrerer sikkert AC-volumentage without direct contact, indicated by sound and light.
• Baggrundsbelysning display: Large LCD with backlight for clear readings in dark environments.
• Data Hold: Fryser den aktuelle aflæsning på displayet.
• MAX/MIN-funktion: Registrerer maksimale og minimale måleværdier.
• REL (Relative) Mode: Measures the change in a signal relative to a stored reference value.
• Automatisk/Manuel afstandsmåling: Offers flexibility in measurement ranges.
• Double Insulation Design: Provides enhanced user safety.
• Automatisk slukning: Sparer batterilevetid.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp Måler:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp Kæber: Opens up to 45mm to enclose a conductor for current measurement.
2. NCV Detection Area: Area for non-contact voltage afsløring.
3. Jaw-Opening Handle: Bruges til at åbne og lukkeamp kæber.
4. Drejekontakt: Vælger målefunktioner og -områder.
5. HOLD-tast: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
6. SELECT-tast: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. MAX/MIN Key: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. REL Key: Aktiverer relativ måletilstand.
9. Hz/Duty Key: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. LCD-skærm: 6000 counts digital display with full function symbols.
11. COM-indgangsstik: Fælles (negativ) indgang til testledninger.
12. VΩHzT+ Input Jack: Positiv indgang for volumentage, resistance, frequency, temperature, and capacitance measurements.

5. Opsætning

5.1 Batteriinstallation

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. Sørg for at clamp meter is turned OFF (Rotary Switch set to OFF).
2. Find batteridækslet på bagsiden af ​​måleren.
3. Brug en skruetrækker til at åbne batterirummet.
4. Connect the 9V battery to the battery clips, observing correct polarity.
5. Place the battery into the compartment and secure the cover.

5.2 Indledende tænding

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Image 5.1: The clamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Betjeningsvejledning

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 AC/DC-strømmåling

1. Set the Rotary Switch to the 600A~1000A position.
2. Tryk på VÆLGE key to switch between AC (~) and DC (—) current measurement if necessary.
3. Åbn clamp jaws using the jaw-opening handle.
4. Omslut kun én leder med clamp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. Aflæs den aktuelle værdi på LCD-displayet.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 AC/DC Voltage Måling

1. Set the Rotary Switch to the V— or V~ position.
2. Tryk på VÆLGE key to switch between AC (~) and DC (—) voltage measurement if necessary.
3. Indsæt den sorte testledning i KOM stikket og den røde testledning ind i VΩHzT+ stik.
4. Tilslut testproberne på tværs af det kredsløb eller den komponent, der skal måles.
5. Læs bindtage -værdi på LCD -displayet.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω position.
2. Tryk på VÆLGE key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Indsæt den sorte testledning i KOM stikket og den røde testledning ind i VΩHzT+ stik.
4. Tilslut testproberne til komponenten.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Frekvens- og duty cycle-måling

1. Set the Rotary Switch to the Hz position.
2. Indsæt den sorte testledning i KOM stikket og den røde testledning ind i VΩHzT+ stik.
3. Tilslut testproberne til signalkilden.
4. Tryk på Hz/pligt key to switch between Frequency (Hz) and Duty Cycle (%).
5. Aflæs værdien på LCD-displayet.

6.5 Temperaturmåling

1. Set the Rotary Switch to the ° C / ° F position.
2. Insert the thermocouple into the KOM og VΩHzT+ stik, observerer polariteten.
3. Placer termoelementproben på det punkt, hvor temperaturen skal måles.
4. Tryk på VÆLGE key to switch between Celsius (°C) and Fahrenheit (°F).
5. Aflæs temperaturværdien på LCD-displayet.

Image 6.1: The clamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 Non-Contact Voltage (NCV) Detektion

1. Set the Rotary Switch to the NCV position.
2. Move the NCV detection area of the meter close to the wire or conductor where voltage er mistænkt.
3. Hvis AC voltage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Image 6.2: The clamp måler, der detekterer berøringsfri volumentage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Baggrundsbelysningsfunktion

To activate or deactivate the backlight, press and hold the HOLDE button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Download appen: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Registrer/Log ind: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Tilslut Clamp Måler: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Når du er tilsluttet, kan du view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV files).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view data.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Vedligeholdelse

• Rensning: Regularly wipe the meter casing med annonceamp klud og mildt rengøringsmiddel. Brug ikke slibemidler eller opløsningsmidler.
• Udskiftning af batteri: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Opbevaring: If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kalibrering: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

9. Fejlfinding

10. Specifikationer

11. Garanti og support

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.