APEX VR70

APEX VR70 FPV Drone Kit User Manual

Model: VR70 | Brand: APEX

Indledning

Welcome to the world of FPV flying with your new APEX VR70 FPV Drone Kit. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your drone to ensure a safe and enjoyable experience. Please read this manual thoroughly before your first flight.

The APEX VR70 is designed for both beginners and those looking to advance their FPV skills, offering stable flight modes and immersive first-person viewing.

Pakkens indhold

Your APEX VR70 FPV Drone Kit includes the following components:

  • 1 x APEX VR70 FPV Drone
  • 1 x FPV Goggles
  • 1 x fjernbetjening
  • 3 x Lithium Ion Batteries (400 mAh each)
  • 1 x USB ladekabel
  • Reserve propeller
  • Lille skruetrækker
  • Værktøj til fjernelse af propel
APEX VR70 FPV Drone Kit components laid out

Image: All components of the APEX VR70 FPV Drone Kit, including the drone, FPV goggles, remote controller, batteries, and tools.

Opsætning

Follow these steps to prepare your APEX VR70 for its first flight:

  1. Oplad batterier: Connect the provided USB charging cable to the drone batteries and a compatible 5V/2A USB power adapter (not included). The charging time is approximately 40-50 minutes per battery. Ensure all 3 batteries are fully charged before use.
  2. Installer batterier: Carefully insert the charged batteries into the drone and remote controller as per the diagrams. Ensure correct polarity.
  3. Attach Goggle Antenna: Securely screw the antenna onto the FPV goggles.
  4. Tænd: Turn on the remote controller first, then the drone, and finally the FPV goggles. Allow them to pair automatically.
  5. Opsætning af controller: The remote controller features a left throttle rocker without spring-back, which is ideal for manual flight modes.
  6. Simulator Practice: For beginners, it is highly recommended to practice with a flight simulator. The transmitter is compatible with Uncrashed, TRYPFPV, and Phoenix RC simulators. A separate S.BUS protocol dongle is required for simulator use.
Person using APEX VR70 controller with a laptop showing a flight simulator

Image: A user practicing FPV drone flight using the APEX VR70 controller connected to a laptop running a flight simulator.

Betjeningsvejledning

The APEX VR70 offers multiple flight modes to suit different skill levels:

  • Beginner Mode (Altitude Mode): Ideal for new pilots. The drone will maintain a stable altitude automatically, allowing you to focus on directional control.
  • Manuel tilstand: For experienced pilots, this mode provides full manual control, enabling advanced maneuvers and freestyle flying.

Controller funktioner:

KontrollereFungere
Tænd/slukPress and hold the power button. The buzzer sounds twice, indicating power on.
Lås op/låsIn Beginner mode, press the unlock button to idle the motor. Press again to stop. In Manual mode, push the throttle rocker to the lowest position to stop.
Throttle RockerControls vertical ascent/descent. Left throttle rocker has no spring-back for precise manual control.
Direction RockerStyrer bevægelse frem/tilbage, venstre/højre.
Trim funktionerAdjust drone stability when drifting.
LED-lysafbryderShort press to change the 7 LED colors.
HastighedskontaktShort press to adjust speed (3 gears).
HovedbevægelseskontrolConnect audio cable to the remote and VR glasses for head motion control.
APEX VR70 Controller instruction diagram

Image: Detailed diagram of the APEX VR70 remote controller with labels for all buttons and functions.

FPV Goggles Usage: The FPV goggles provide a real-time, low-latency video feed from the drone's camera, offering an immersive flight experience. The video signal is transmitted directly to the headset, which also handles recording. There is no SD card slot on the drone itself; recording is managed through the headset. This ensures minimal lag for a responsive flight.

Person wearing FPV goggles and controlling the APEX VR70 drone

Image: A person wearing the APEX FPV goggles and holding the remote controller, experiencing immersive drone flight.

Opretholdelse

To ensure the longevity and optimal performance of your APEX VR70 FPV Drone Kit, follow these maintenance guidelines:

  • Rensning: Use a soft, dry cloth to clean the drone, controller, and goggles. Avoid using harsh chemicals or solvents.
  • Propelinspektion: Regularly check propellers for any damage (cracks, bends, chips). Replace damaged propellers immediately using the provided tool to maintain flight stability and safety.
  • Batteripleje: Opbevar batterier et køligt og tørt sted. Overoplades eller overaflades ikke. Hvis de opbevares i længere perioder, skal de oplades til ca. 50% kapacitet.
  • Opbevaring: When not in use, store the drone and accessories in a safe, dry environment, away from direct sunlight and extreme temperatures.
  • Rotor Guards: The drone features rotor guards to protect the propellers and prevent injury during minor collisions. While durable, inspect them for damage after impacts.

Fejlfinding

If you encounter any issues with your APEX VR70, refer to the table below for common problems and their solutions:

BesværÅrsagLøsning
Drone LED blinks, no response to commandsPairing between drone and controller failedRefer to the frequency alignment of remote controller and receiver in P3 (refer to controller instruction diagram).
Drone has no reaction to commands after turning onBattery diedCharge the drone.
Blades keep moving after landingThrottle lever is not at the zero positionPut the throttle lever to zero position.
Blades keep moving, drone cannot take off1. Blades may be installed wrong
2. No enough power
1. Change the blades
2. Oplad dronen.
After trimming, drone keeps spinning, speed of blades is different1. Blades may be installed wrong
2. Blades get damaged
3. Kalibrering mislykkedes
1. Install the blades correctly
2. Udskift knivene
3. Refer to P3 for calibration (refer to controller instruction diagram).
Drone cannot take off after drop1. Blades are getting loose
2. Blades get damaged
1. Tighten the blades
2. Udskift knivene.
APEX VR70 Troubleshooting table

Image: A table outlining common troubleshooting steps for the APEX VR70 drone.

Specifikationer

FeatureDetalje
MærkeSPIDS
ModelnavnVR70
Aldersinterval (beskrivelse)Voksen
FarveHvid
Videooptagelsesopløsning480p
ForbindelsesteknologiRF
Inkluderede komponenterKamera
FærdighedsniveauNybegynder
Varens vægt100 gram (3.53 ounce)
Batterikapacitet400 mioamp Timer
VideooptagelsesformatMP4
FjernbetjeningsteknologiWi-Fi
KontroltypeFjernbetjening
MedietypeSD (for headset recording)
Maksimal rækkevidde1000 fod (ca. 300 meter)
Trådløs kommunikationsteknologiRF
BattericellesammensætningLithium Ion
Er batterier inkluderetJa (3 inkluderet)
Understøttet billedformatJPEG
Video Output Resolution480p
Fjernbetjening inkluderet?Ja
Optisk sensorteknologiCMOS
Genopladeligt batteri medfølgerJa
Produktdimensioner9 cm L x 3.54 cm B x 1.57 cm H
FabrikantSPIDS
OprindelseslandKina
Dato først tilgængelig4. november 2021

Garanti & Support

Your APEX VR70 FPV Drone Kit is designed for durability and performance. If you encounter any problems with the product, please contact our dedicated after-sales service staff. We are committed to resolving any issues you may have.

E-mail support: intisarshakiyla50@gmail.com

© 2024 APEX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.