AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produktet er slutview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Nøglefunktioner:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedieadgang: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Specifikationer

3. Opsætningsvejledning

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Udpakning

1. Tag forsigtigt pc-kabinettet ud af emballagen.
2. Fjern eventuelle beskyttelsesfilm eller indvendige emballagematerialer.
3. Placer etuiet på en stabil, flad overflade.

3.2 Installation af bundkort

1. Fjern sidepanelet af hærdet glas ved at skrue fingerskruerne ud.
2. Installer I/O-skjoldet (hvis det ikke er forudinstalleret på dit bundkort) i den bageste åbning af kabinettet.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Fastgør bundkortet med de medfølgende skruer.

3.3 Installation af strømforsyning

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Fastgør strømforsyningen med skruer fra bagsiden af ​​kabinettet.

3.4 Installation af lagerdrev

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Installation af udvidelseskort (GPU)

1. Fjern de nødvendige dæksler til udvidelsespladserne fra bagsiden af ​​kabinettet.
2. Indsæt dit grafikkort eller andre udvidelseskort i PCIe-portene på dit bundkort.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Kølesystem

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kabelstyring

Brug kabelføringsudskæringerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne. Dette forbedrer luftgennemstrømningen og æstetikken.

4. Betjeningsvejledning

4.1 Tænd/sluk

• To power on your PC, press the Magt button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Magt knappen i et par sekunder.

4.2 Frontpanelets I/O-porte

The top panel provides convenient access to various ports:

• USB 3.0-port (x1): Til højhastigheds dataoverførsel.
• USB 2.0-porte (x2): Til tilslutning af periferiudstyr.
• Mikrofonstik: Til lydindgang.
• HD Audio Jack: For audio output (headphones/speakers).
• Nulstil knap: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dine pc-komponenter.

5.1 Rengøring af støvfilter

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Generel rengøring

• Tør ydersiden af ​​kabinettet af med en blød, tør klud.amp klæde. Undgå slibende rengøringsmidler.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Fejlfinding

Hvis du støder på problemer med dit pc-kabinet, kan du overveje følgende almindelige fejlfindingstrin:

• Ingen strøm: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilatorer drejer ikke/RGB virker ikke: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Overophedning: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Frontpanelporte virker ikke: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garanti og support

7.1 Garantioplysninger

The AeroCool HEXFORMBKV2 PC case comes with a 2 års garanti for parts. Please retain your proof of purchase for warranty claims.

7.2 Teknisk support

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webwebsted eller i produktemballagen.

• AeroCool Officiel Webwebsted: www.aerocool.io
• E -mail til kundesupport: support@aerocool.io (Eksample, please verify on official webwebsted)